Kenmore 153.31604 owner manual Drain Valve Washer Replacement, Anode Rod Inspection, Service

Page 17

FIGURE 24.

16.Replace terminal cover on thermostat making sure that the locking tabs on the terminal cover are in place.

FIGURE 25.

17.Replace the insulation to cover the thermostat and the element.

FIGURE 26.

18.Replace access panel.

19.Turn “ON” electric power to water heater.

FIGURE 27.

Drain Valve Washer Replacement.

NOTE: For replacement, use a 17/32” x 13/64” x 1/8” thick washer available at your nearest hardware store. For ordering a replacement washer, refer to the “Repair Parts List” section.

•Before beginning turn “OFF” the electrical power supply to the water heater.

•Follow “Draining” instructions in the “Service and Adjustment” section.

•Turning counter clockwise, remove the hex cap below the screw handle.

•Remove the washer and put the new one in place.

•Screw the handle and cap assembly back into the drain valve and retighten using a wrench. DO NOT OVER TIGHTEN.

•Follow “Filling the Water Heater” instructions in the “Installation Instructions” section.

•Check for leaks.

•Turn “ON” electric power to the water heater.

FIGURE 28.

Anode Rod Inspection

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod deteriorates to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not effect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

Anode deterioration depends on water conductivity, not necessarily water condition.Acorroded or pitted anode rod indicates high water conductivity and should be checked and/or replaced more often than an anode rod that appears to be intact. Replacement of the depleted anode rod can extend the life of your water heater. Inspection should be conducted by calling the Sears Service Center for an authorized contractor. At a minimum, the anode(s) should be checked annually after the warranty period.

Service

Before calling for repair service, read the “Start Up Conditions” and “Operational Conditions” found in the Troubleshooting section of this manual.

If a condition persists or you are uncertain about the operation of the water heater, let a qualified person check it out.

Contact Sears Repair Services at 1-800-4-MY-HOME (1-800-469-4663).

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A Safe INSTALLATION, USE and Service General Safety Introduction Table of ContentsGauge Size Amps Product SpecificationsSoft Solder Solder Flux Emery Cloth Wire Brushes Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Materials NeededRemoving the Old Water Heater Installation InstructionsInsulation Blankets Facts to Consider About the LocationWater Piping Valve and Pipe Insulation Optional Installation InstructionsTemperature-Pressure Relief Valve Filling the Water Heater Wiring Connections WiringWiring Diagrams Temperature Regulation Service and AdjustmentThermostat Adjustment Temperature SettingsDraining Temperature-Pressure Relief Valve OperationElement Cleaning/Replacement Thermostat Removal/ReplacementPage Service Drain Valve Washer ReplacementContact Sears Repair Services at 1-800-4-MY-HOME Anode Rod InspectionStart Up Conditions TroubleshootingOperational Conditions Thermal ExpansionRumbling Noise High Temperature Shut OFF SystemAIR in HOT Water Faucets Water is TOO HOT Not Enough or no HOT WaterLeakage Checkpoints 19 20S 19.9 20T Description Repair Parts ListThis is a Repair Parts LIST, not a Packing List Thermostat w/4 Terminal Hi Limit Key Model Numbers Part DescriptionYear Exclusive Kenmore Labor Warranty Year Limited Warranty on Water HeaterWarranty Service Sears Installation Service

153.31604 specifications

The Kenmore 153.31604 is a versatile and efficient dehumidifier designed for residential use, making it an ideal solution for those seeking to maintain a comfortable indoor environment. With a sleek and compact body, this appliance integrates seamlessly into various spaces, from basements to living rooms, delivering exceptional performance without being an eyesore.

One of the main features of the Kenmore 153.31604 is its impressive moisture removal capacity. It can efficiently extract up to 50 pints of moisture from the air per day, making it particularly effective for areas that experience high humidity levels. This capability allows homeowners to combat mold, mildew, and allergens, promoting a healthier living environment.

Equipped with advanced technologies, the Kenmore 153.31604 boasts an adjustable humidistat that provides optimal humidity control. Users can set their desired humidity level, and the dehumidifier will automatically cycle on and off to maintain that setting, ensuring energy efficiency. This feature not only saves electricity but also prolongs the appliance's lifespan.

The Kenmore 153.31604 also features a continuous drainage option. For convenience, this allows users to connect a garden hose to the unit, enabling continuous water drainage without the need to frequently empty the water bucket. The 1.8-gallon removable water tank is user-friendly as well, designed with a transparent window so users can easily monitor water levels. An overflow protection system is in place to prevent spills, adding to the appliance’s ease of use.

Noise levels can be a concern with many household appliances, but the Kenmore 153.31604 operates quietly, making it suitable for use in bedrooms and other quiet spaces. The lightweight design enhances portability, allowing users to move the unit from room to room as needed.

In terms of energy efficiency, the Kenmore 153.31604 is Energy Star certified, ensuring that it meets specific energy efficiency guidelines set by the EPA. This certification helps users save on energy bills while reducing their environmental impact.

Overall, the Kenmore 153.31604 combines functionality, technology, and user-friendly features, making it a top choice for anyone looking to control indoor humidity effectively. Its robust performance, efficient operation, and thoughtful design make it a valuable addition to any home.
Top Page Image Contents