Mounting the Control Module

Switch 5

Switch Input Polarity	ON (-) OFF (+)

Dipswitch #5 controls the polarity that the 530T switch input wires will respond to. For type A and type C systems, it must be set to the OFF (+) position. When the switch is in the off position the 530T responds to (+) positive inputs on its switch wires. If your vehicle has a type B system, this switch must be set to the ON (-) position, so the 530T will respond to (-) negative inputs on its switch wires. Remember, the type B system switches its wires to (-) ground rather than (+)12V.

When mounting the control module, always locate it as close to the window motor as possible. The driver-side kick panel is an ideal location. If “one-touch” operation from the passenger-side switch is desired, interface with the passenger-side wires between the passenger-side switch and the motor. This usually requires the passenger-side wires to be extended and run into the passenger-side door. When extending the wires, use no smaller than 14 gauge wire.

IMPORTANT! Do not mount the control module in the vehicle door, as water damage will result. The best results are obtained by mounting the control module inside the vehicle, as close to the window motor as possible, in one of the kick panels.

Operating Instructions

To roll the windows up:

Simply arm the vehicle security system. The windows will roll up completely.

To arm the security system and leave the windows down:

1.Press the auxiliary channel.

2.Within 5 seconds arm the security system.

3.The security system will arm, but the windows will remain down.

To vent the windows:

At any time, press and release the auxiliary channel. The windows will vent about two inches.

To roll the windows down:

At any time, press and hold the auxiliary channel for three seconds. The windows will roll all the way down.

To activate “one-touch” operation:

1.Turn on the ignition.

2.Tap the power window switch in either direction. The window will open or close completely.

To stop the window:

1.Turn on the ignition.

2.Tap the power window switch in either direction while the window is in motion.

© 2000 Directed Electronics, Inc.	7	N530T 1/00
	7

530T specifications

Directed Electronics 530T is a sophisticated vehicle security system that has garnered attention for its robust features and innovative technology. As a leading name in the automotive security industry, Directed Electronics has designed the 530T model to provide users with comprehensive protection against theft and unauthorized access to their vehicles.

One of the standout features of the Directed Electronics 530T is its two-way communication capability. This advanced system allows users to receive feedback from their vehicle's security system, ensuring that they are always aware of its status. This two-way functionality provides peace of mind, as users can receive alerts about potential security breaches, even from a distance, thanks to the system’s impressive range.

Another notable characteristic of the 530T is its built-in shock sensor, which detects any significant movement or impacts to the vehicle. This sensor is designed to trigger the alarm, alerting the owner of potential tampering. The sensitivity of the shock sensor can also be adjusted, allowing users to customize the level of responsiveness according to their personal preferences and environmental conditions.

Additionally, the Directed Electronics 530T system includes a remote start feature, a highly desired convenience that allows users to start their vehicle from a distance. This feature is especially useful in extreme weather conditions, enabling the vehicle to heat up or cool down before the driver enters. The remote start functionality operates seamlessly with the security system, ensuring that the vehicle remains protected while providing convenience.

Adoption of modern technology is evident in the 530T's design, as it supports compatibility with a variety of vehicles. The installation process is also simplified due to its plug-and-play capabilities, which cater to both professional installers and DIY enthusiasts.

Furthermore, the Directed Electronics 530T is equipped with a user-friendly interface, making it accessible for individuals who may not have extensive technical knowledge. The system also emphasizes reliability, with battery backup features that ensure operation even during power loss.

In conclusion, the Directed Electronics 530T stands out with its two-way communication, adjustable shock sensor, and convenient remote start capabilities. Its commitment to advanced technology and user-friendly design make it an excellent choice for those looking to enhance the security and functionality of their vehicles. As vehicular threats continue to evolve, the 530T positions itself as a formidable solution in the realm of automotive security.