Niles Audio FM-1R manual Installation Considerations, Operation

Page 6

Installation Considerations

FM-1/FM-1R Suggested Placement

Shelf Installation

The FM-1/FM-1R pulls air from the bottom of the unit through its chassis and out the top.

Place the FM-1/FM-1R on top of device to help cool:

FM-1

Power Amp

FM-1

When used in a closed shelf-type configuration.

Figure 1

When the amplifiers vent from the bottom and top of the case like Niles SI-245, SI-275, SI-2125, SI-1230, SI-1260, ZR4630, ZR8630AV.

Note: The intellicontrol® ICS GXR2 has built in fans to help with cooling.

Mounting the FM-1/FM-1R at the top of the rack, with vents above the FM-1/FM-1R to allow heat to be removed from the rack is much more efficient then to try and force cool air into the rack.

When installed in a rack, proper planning of the air path inside the rack ensures that heat will be effectively removed. When a power amplifier has no vents leaving one rack space between the power amplifier and other devices is suggested. A vented front panel should be mounted over this space to maximize the flow of air over the amplifier. Some amplifier manufacturers suggest to mount the units directly on top of each other. These are usually amplifiers that have front and rear venting.

Remember to keep a clear air path inside the rack, the heat will be removed from the rack more effectively if there are no obstacles in the way. Make sure to use a vented shelf if it will block the air flow in the rack. Air flows hot to cold, you cannot remove the heat from the rack if the outside air is not cooler than the air in the rack.

Operation

Delayed Shut-Off

The FM-1/FM-1R has a built-in two minute delayed shut-off. This feature helps to dissipate heat buildup in the rack or cabinet even after the system has been powered down. The shut-off delay will always be active, even when using the trigger input to automatically turn on the FM-1/FM-1R.

FM-1

Dual Male ‘Mini’

plug cable

4

Figure 2

Image 6
Contents FM-1 FM-1R Congratulations Table of Contents Introduction Features and Benefits Installation Considerations OperationLED’s Important Safety Information Risk of electric shock Do not openUnit has been dropped or the enclosure damaged Limited Warranty Warranty Registration Card Detach here and return to Niles Audio CorporationL e s a u d i o C o r p o r a t i o n

FM-1, FM-1R specifications

Niles Audio, a renowned name in the world of home audio solutions, has consistently pushed boundaries with its innovative products. Among them, the Niles FM-1 and FM-1R stand out as exceptional components tailored for managing and enhancing audio systems.

The Niles FM-1 FM Modulator provides a seamless way to integrate and broadcast audio signals. Its core function is to convert audio from various sources into an FM signal, which can then be received by any standard FM radio. This feature is particularly beneficial for users looking to streamline their audio setups without extensive cabling or complex installations.

One of the main features of the FM-1 is its ability to support a wide variety of audio sources. Whether it's a computer, streaming device, or traditional sound system, the FM-1 accepts line-level audio inputs, ensuring users can enjoy their favorite tunes with ease. The system also boasts a user-friendly interface, making adjustments simple even for those who may not be technologically savvy.

The FM-1R takes the functionality of the FM-1 a step further by incorporating remote capabilities. With the FM-1R, users can control audio settings from a distance, enhancing the overall convenience of the system. This remote control option is especially beneficial for larger spaces, ensuring that users can adjust volume levels or switch tracks without needing to be physically present at the source.

Both systems emphasize high-quality sound reproduction. Niles Audio has engineered these devices to minimize interference and maximize audio fidelity, ensuring that the listener experiences music as it was intended. The signal clarity is impressive, even at extended ranges, which is a testament to the advanced technologies employed in their design.

Additionally, the FM-1 and FM-1R feature adjustable output power settings that allow users to tailor the transmission strength to their specific needs. This adaptability enables efficient broadcasting in various environments, from small rooms to larger areas.

With their blend of stylish design, user-friendly operation, and advanced audio technology, the Niles FM-1 and FM-1R are excellent choices for anyone looking to elevate their audio experience. Niles Audio continues to set the standard in delivering high-performance audio solutions that cater to the evolving needs of music enthusiasts.