Cooper Bussmann 9752 manual Introduction, Omitting Zones

Page 16
The display shows:
To set with a zone omitted: 1. Key in your access code.

4. Special Functions

Introduction

You can perform a number of other functions from the keypad, apart from setting and unsetting the system. These functions are:

[Access code] + A (B, C or D) + ￿

Omit zone while setting.

[Access code] + ￿

Omitting 24 hour zones.

[User 01 Access code] + 4

Changing access codes and user

 

names.

[Access code] + 5

Reading the system log.

[User 01 Access code] + 6

Setting the time and date.

[Access code] + 7

Turning the chime on or off.

[Access code] + 8

Testing the sounders.

[Access code] + 9

Testing the zones.

[Access code] + 0

Call out to <Downloader>.

To use these functions you must key in your access code and then press a number key. The rest of this section describes each function in turn.

Omitting Zones

Your system may be programmed so that you can omit individual￿()*￿￿￿+￿￿￿￿,￿,detectors when setting the system. Ask your Installer which zones can be omitted. Note that omission is not permanent. You must omit the zone every time you set the system.

2.Press the appropriate Level key, and then within 5 seconds press ￿.

3. Press the number of the zone you want to omit (for example, key in 2 to

omit zone 2) and then press ￿.

 

 

 

 

 

￿￿￿￿￿￿￿￿￿￿￿￿￿

If the system accepts the omission the

 

 

sounder gives a double beep and the

 

 

 

display shows:

"beep beep"

 

To omit more zones press ￿again

 

within 5 seconds.

 

 

 

Note: If you decide you have omitted the wrong zone, press ￿followed by the zone number and ￿to reinstate the zone.

16

496679

Image 16
Contents User Guide Contents Alarm System KeypadsKey Used to Introduction725r Telecommand Remote Setting Device About This GuideHow Do I Know if the System is Working? Setting the SystemTimed Set Exceeding the Exit Time Final Door SetUsing an Exit Terminate Button to Set the System Part SettingKeyswitch Setting Instant SetPage Press Starting Alarms Yourself System is now unset Unsetting From a 725r Full or Part SetSystem is now unset If You Exceed the Entry TimeDuress Code PTOReset the system yourself from the keypad Press Introduction Omitting ZonesAccess Codes Page C Æ Å Ä Log Event Codes Message MeaningSpecial Functions Page That you have triggered. If there is Company Name

9752 specifications

The Cooper Bussmann 9752 is a versatile and reliable fuse that plays a critical role in protecting electrical circuits against overloads and short circuits. This specific fuse is designed to cater to a wide range of applications, particularly in industrial, commercial, and residential settings. The 9752 model is renowned for its robust construction and operational efficiency, making it a go-to choice for many electrical engineers and technicians.

One of the most notable features of the Cooper Bussmann 9752 is its current limiting capability. This technology allows the fuse to reduce the amount of energy that can pass through when a fault occurs. By limiting the current, the 9752 effectively minimizes the potential for thermal damage to both the fuse itself and other components in the circuit, thereby ensuring greater system integrity.

The 9752 is constructed using high-quality materials that ensure durability and a long service life. Its design includes a reliable element that melts only under fault conditions, allowing normal operating currents to pass without interruption. This feature is particularly important in protecting sensitive electronic equipment from damage due to unexpected surges in current.

Another key characteristic of the Cooper Bussmann 9752 is its fast-acting response time. In emergency situations where time is of the essence, the 9752 quickly reacts to harmful overload conditions, disconnecting the circuit almost instantaneously. This quick action helps avoid extensive damage and safety risks, making it an essential component in critical applications.

The Cooper Bussmann 9752 fuse is also designed with user convenience in mind. Its compact size and standard mounting options allow for easy installation in a variety of electrical panels and enclosures. Additionally, the fuse’s clear labeling and identification features make it easy to determine its specifications and ratings, facilitating maintenance and replacement.

In conclusion, the Cooper Bussmann 9752 is an exemplary choice for circuit protection. With its current limiting technology, durable construction, fast-acting response, and user-friendly design, it meets the high standards demanded by modern electrical systems. Whether it's used in industrial machinery, commercial buildings, or residential applications, the 9752 fuse delivers reliable performance, ensuring the safety and longevity of connected devices and systems.