Radio Shack owner manual 49-2551AB.fm Page 34 Friday, February 19, 1999 341 PM

Page 34

49-2551AB.fm Page 34 Friday, February 19, 1999 3:41 PM

Problem

Solution

 

 

 

 

The red light on the hand-

Press the button located beneath the label with a

held remote control stays

pencil and then press ARM. If it still stays on, re-

on during installation.

move the battery, wait a few seconds, then replace

 

the battery. Press the button and then ARM again.

 

 

The red light on the sensor/

Press CODE, then press TEST on the sensor/mo-

motion detector stays on

tion detector. If it still stays on, remove the battery,

during installation.

wait a few seconds, and then replace the battery.

 

Press CODE, then press TEST again.

 

 

ARMED flashes.

This indicates that there has been an intrusion. Al-

 

so, if a zone indicator is on, this indicates which

 

zone was violated. To turn the zone indicator off

 

and stop the armed indicator from flashing, press

 

the LIGHT ON or OFF button on a remote control. If

 

a zone indicator is not on, the violated zone is with-

 

in zones 9-16. Press BYPASS on the console to see

 

which zone was tripped.

 

 

A motion detector causes

Motion detectors sense motion by detecting a

“false alarms.”

change in temperature; therefore, do not place the

 

motion detector near an air conditioning or heating

 

vent.

 

 

 

Do not place it in a direct source of bright light, such

 

as sunlight.

 

 

 

It could be detecting a pet’s movements. Place the

 

detector at a height of 6 feet, or set the switch on

 

the back to 2 so it is less sensitive.

 

 

The console does not dial

Check that you have stored a phone number (see

out.

“Setting up Phone Numbers” on page 22).

 

 

 

Check that the console is armed

 

 

The console does not play

Check that you have recorded a message (see

back any message when

“Recording a Voice Message” on page 24).

the phone is answered.

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Wireless Home Security System Two Wireless Sensor Transmitters Introduction49-2551AB.fm Page 3 Friday, February 19, 1999 341 PM Read this Before Installation FCC Wants YOU to KnowContents Troubleshooting Care and Maintenance Glossary Planning Your Security System Assigning Security Codes Reassigning Security CodesQuick INSTALLING/TESTING Your System Setting UP ConsoleInstalling the Keychain Remote Control Installing the Handheld Remote Control Initializing the Wireless Sensor Transmitters Initializing Motion Sensor Installing the Lamp Module Testing the System Mounting Accessories Mounting the Wireless Sensor TransmittersMounting the Motion Detector RightWrong Testing the Motion Detector Making a PET Zone49-2551AB.fm Page 21 Friday, February 19, 1999 341 PM Setting UP the Telephone Dialer Setting UP Phone NumbersSet INSTALL/RUN 1/RUN 2 on the console to Install Recording a Voice Message Testing the Dialer Operation ARMING/DISARMING the SystemUsing the Panic Alarm Zone IndicatorsReading the Status Zones After AN Alarm During AN AlarmControling Plug ’N Power Modules Resetting Console Using Security LightTroubleshooting Problem SolutionPress Test on the wireless sensor transmitter Battery 49-2551AB.fm Page 34 Friday, February 19, 1999 341 PM 49-2551AB.fm Page 35 Friday, February 19, 1999 341 PM Care and Maintenance Replacing the CONSOLE’S Battery Replacing a Wireless TRANSMITTER’S Sensor Batteries Intercom SystemsFCC Cautions LightningRadioShack Division of Tandy Corporation Fort Worth, Texas

49-2551A specifications

The Radio Shack 49-2551A is a versatile and user-friendly infrared remote control that has gained popularity among tech enthusiasts and casual users alike. Designed with the aim of simplifying device operation, the 49-2551A is a practical solution for anyone looking to control multiple home electronics with ease.

One of the standout features of the 49-2551A is its ability to control a wide range of devices. This universal remote can operate various components, including TVs, VCRs, DVD players, cable boxes, and even some audio systems. This multi-device compatibility makes it a convenient choice for users seeking to consolidate their remotes into one streamlined device.

The 49-2551A employs infrared (IR) technology for communication with compatible devices. This traditional but reliable technology consists of infrared light signals that are emitted from the remote to the device, allowing for a straightforward and effective way to send commands. The line-of-sight capability ensures efficient operation, as long as the remote is pointed directly at the device.

In terms of design, the Radio Shack 49-2551A is built for comfort and usability. It features a well-organized button layout with clearly labeled functions, making it intuitive for users to find what they need quickly. Large, tactile buttons facilitate ease of use, even for individuals who may have limitations in dexterity or vision. Additionally, its lightweight, compact design makes it easy to handle and store.

Another significant characteristic of the 49-2551A is its programmable capabilities. Users can easily set up the remote to control different devices, customizing the remote for their specific home entertainment system. The programming process is straightforward, often requiring only a few codes to be entered, which can be found in the user manual or online.

The Radio Shack 49-2551A also features a memory function that ensures that programmed settings are retained even when the batteries are replaced. This feature provides peace of mind for users, as they do not have to reprogram their remote after every battery change.

In conclusion, the Radio Shack 49-2551A is a robust and practical infrared remote control that stands out for its compatibility with various devices, intuitive design, and programmable features. Whether you are a seasoned tech user or a newcomer to home entertainment systems, the 49-2551A offers an effective solution for managing your electronics with ease.
Top Page Image Contents