Night Owl Optics 4BL, Night Owl manual NETWORK SETUP menu

Page 23
NETWORK SETUP menu.

User’s Manual

5.2.5Network Setup – Global Access (Connected through a Router or Firewall) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the

NETWORK SETUP menu.

If you would like to access your DVR while you are outside of your home or office network,

please follow the instructions below to configure the NETWORK Setup of your DVR

Important Note: You will not be able to access your DVR if your DVR is connected behind two or more routers.

Important Note: If you are using a DSL modem, the modem must be set to “bridge mode”.

Important Note: We will not be able to help you set up the network configurations if you have a

RADIUS Server or Network Magic installed.

Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that you perform the following tasks:

1.Access the configuration page of your router or Firewall.

2.Reserve an IP Address in your router or firewall that is not used by other computers or devices connected to your internal network.

3.Make sure your router is configured properly for computer or devices outside of your local network to access your DVR through your router. To do so, please use the following method(s): NAT (Network Address Translation), Port Forwarding, DMZ (De-Military Zone), DDNS (Dynamic DNS). Please refer to your router or firewall user’s manual for reference. Note: Improper configuration on the router or firewall will prevent you from accessing your DVR from outside your network.

4.Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of your Router (Gateway) of your DVR for future reference when configuring the DVR.

1.Select STATIC as the network TYPE.

2.Leave Media Port at 9000

3.Setup Web Port (leave at 80 but some ISPs block inbound traffic on port 80 to prevent web servers so if the DVR cannot be remotely accessed choose a different port number)

4.Enter the IP Address that you have reserved at the beginning of this section into this field to be the unique address of your DVR in your local network.

5.NETMASK: It is recommended to leave the Subnet mask as the default 255.255.255.0.

6.Set the GATEWAY to the IP Address of your router.

7.Set the DNS (Domain Name Server) Address to the IP Address of your router.

8.Leave the UPNP option at “Enable”. Click “APPLY” to save your changes

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Rev TABLE OF CONTENTS Page FCC Compliance Statement FCC RADIATION NORMIBM PCs or 100% Compatibles Windows XP, Vista PACKAGE CONTENTSSYSTEM REQUIREMENTS CD-ROMDrive for software installation3.Do not operate in wet or dusty area SAFETY INSTRUCTION1.Use proper power source 5.Keep product surfaces clean and dryOther Features： CHAPTER 1 DVR FEATURESMarks IndicatorsCHAPTER 2 LAYOUT Buttonsports PhysicalConnection method 2.3 Remote Control 2.4 Mouse Operation 3.3Connecting the Cameras Chapter 3 DVR/Camera installation3.1 Connecting the DVR to a TV or Monitor 3.2Connecting the Power SupplyCHAPTER 4 DVR START UP 4.1 System Initialization USING THE ONSCREEN DISPLAY4.2 Main Interface Mouse Only Using the Virtual Keyboard - Mouse OnlyCHAPTER 5 DVR MENU AND OPTIONS Password Language Advanced 5.1 Main Menu PreviewRecord Motion Alarm Setup Internet / LAN Mobile E-mailSetup Camera Settings PTZ Date/Time5.2.1Recording Functions 5.2 Main Menu5.2.1.2 Motion 3.Click FILE LIST 5.2.2 PlaybackTo play a recorded video, select “Main Menu”  5.Click BACKUP from the side-panelto immediately begin copying the files to the USB flash drive 5.2.3 Network Setup - Intranet Internal Access DHCP PPPoE STATIC IPNETWORK SETUP menu 5.2.6 Port Forwarding C.Verify that the TCP/IP Type is set to DHCP 1.Turn OFF “Pop Up Blocker” To Modify Internet Explorer controlsPage 5.2.10 Mobile Phone and Tablet PC Access 5.2.9 Mobile Setup6. Enter login information IP：Enter the Public IP or DDNS address of your DVR 2.Select the Search icon Using the Software The functions of the various icons are as follow 5.Select the Network Type supported by your phone To navigate in live view mode 2.Copy the downloaded “Asee.pak” to your phone 10.Select and install the software to your phone 8.Goto “All Programs” and select “ApkInstaller”5.2.11 E-MailSetup 5.2.12Camera To set up your cameras, select “Main Menu” Date/Time menu, the DST STEEING menu will open When you click the DST Setting button in the5.2.13System DATE FORMAT Select YYYY/MM/DD, or MM/DD/YYYY5.2.13.3 Language 5.3 Lock 5.5 PIP MODE 5.4.1Cruise Setup4.Presetting PTZ positions 5.4PTZ Control6.1 Log-into Net-Viewer CHAPTER 6 NET-VIEWERPROGRAM6.2 Main Interface of Net-viewer 6.2.1 Menu columnSystem RecordNetwork Camera6.2.2 Play Control 6.2.3PTZ Control 3.Presetting PTZ positions6.2.4 Remote Backup 6.2.5 Multi Player File format Exclusions WARRANTYTOLL FREE Returns under this WarrantyTOLL FREE CUSTOMER SERVICE North America
Top Page Image Contents