Night Owl Optics 4BL 5.4PTZ Control, Pip Mode, Search, Mute, Manual Rec, Start Rotate, 1 2 3

User’s Manual

5.4PTZ Control

5.4.1Cruise Setup

Open PTZ setting menu if you want to setup cruise function (system default: on), and set up cruise channel, cruise points etc.

1

2

3

4

1.Channel Select: Select the channel of the installed PTZ camera.

2.PTZ direction control: Control PTZ moving direction.

3.Zoom, Focus and Iris Control: control direction, zoom, focus and iris of PTZ.

4.Presetting PTZ positions-

Use this to pre-set several spots of the PTZ camera for quick access.

: Go to the selected preset spot.

: Set PTZ preset positions

: Delete Current cruise point.

: Save setting.

: Start PTZ Cruise.

To start Cruise, exit this screen and click “Start Cruise” of the pop-up menu.

5.5 PIP MODE

Click “PIP MODE” of the pop-up menu to select between one or two small pictures within the main display.

5.6 Search

Click “Search” of the pop-up menu to open the Video Search screen to display a record.

5.7 Mute

Click “Mute On” of the pop-up menu to enable and display sound.

5.8 Manual Rec

Click “Manual Rec” of the pop-up menu to start manual recording.

5.9 Start Rotate

Click “START Rotate” of the pop-up menu to start displaying videos from each camera in preset sequence.

5.10 Start Cruise

If you have purchased a PTZ camera separate and would like to start the PTZ camera to start cruising, click “START Cruise” on the pop-up menu to start the function set in section 5.5.1

41