Mercury SR-10K manual Configuration and Database Copy Commands Commands 41through

Page 8

Configuration Settings (Commands 31through 34)

Command 31 - Set the Door Held Open Time

* 3 1 0-9 0-9

-select Command 31 (from door opening to held open alarm)

-select the held open time: 00 to 99 seconds

Command 32 - Set the Door Strike Relay Pulse Time (Output K1)

*3 2 0-9 0-9

-select Command 32

-select the strike pulse time: 00 to 99 seconds (+1/2 second)

Command 33 - Set the Auxiliary Relay Pulse Time (Output K2)

* 3 3 0-9 0-9

-select Command 33

-select the pulse time for Output K2: 00 to 99 seconds (+1/2 second)

Command 34 - Set the Auxiliary Relay's Pulse Time (Output K2)

*3 4 1 or 2

-select Command 34

-select the pulse type: 1 for normal, 2 for intermittent output

Configuration and Database Copy Commands (Commands 41through 44)

The following commands allow the configuration and database to be copied from one SR-10K to another SR-10K. These commands transfer the selected database elements from the SR-10K where the command is being entered to the SR-10K whose address is specified in the command.

The SR-10K addresses are set by installing the jumper pattern for the desired address on the Inter- face Module as shown on the installation diagram.

The color of the upper LED is set to flashing amber for the duration of the the data transfer. Periodic short beeps are used by longer transfers to indicate "transfer in progress". The transfer of the entire "block mode" card database (1,600 users) may take up to 1 minute.

The completion of a succesful transfer is indicated with the "long-beep". A transfer error condition is signalled with three short beeps along with a red flash on the upper LED. A transfer error is caused by either incorrect wiring, or by incorrect jumper settings. Notice: the transfer commands are not 'broadcast'; each SR10K must be set to a unique address 0 to 15.

Command 41 - Copy the Configuration settings only - no card or cipher databases

* 4 1 0-9 0-9

-select Command 41 (copies seetings enterd with commands 31-34, and 91-95)

-select the address of the SR-10K to copy the data to - 00 to 15

Command 42 - Copy the Cipher Database only

* 4 2 0-9 0-9

-select Command 42 - copies cipher users 0 through 9

-select the address of the SR-10K to copy the data to - 00 to 15

Command 43 - Copy the Card Database only

* 4 3 0-9 0-9

-select Command 43 - copies users 00 through 99, or through 1599

-select the address of the SR-10K to copy the data to - 00 to 15

Command 44 - Copy ALL: Configuration Settings, Card and Cipher databases

* 4 4 0-9 0-9

-select Command 44 - combines Commands 41, 42, and 43

-select the address of the SR-10K to copy the data to - 00 to 15

Mercury Security Corporation, © 2005

SR-10K

Doc. 10107-0007 Rev 1.04

Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SR-10K Mag-Stripe Access System Users Guide Table of Contents Card Database Options DescriptionProgramming Cipher Codes User LevelsOperating Modes Multi-Reader SitesConfiguration Planning Interpreting the LED and Buzzer IndicatorsQuick Start Lost Master CardCommand 10 Add cards Command 11 Delete a card, using the user slotCommand 12 Delete a card, using the card Command 13 Delete a range of cardsCipher Codes Related Commands Commands 15 through Block Database Mode Commands Commands 20 throughConfiguration and Database Copy Commands Commands 41through System Configuration Settings Commands 91through Configuration Operating Mode Access Control with Door MonitoringUser Level Specifications Description Operating Mode Access Control and Alarm Panel Control Description Operating Mode Supervisor Restricted Access Control Operating Mode Two-Door Access ControlOperating Mode Access Control with Door Buzzer Control Operating Mode Output Toggle on Valid AccessInstallation Relay Contact Protection/Noise SuppressionMaintenance SpecificationStrike Addendum Revision C

SR-10K, SR-10K Mag-Stripe Access System specifications

The Mercury SR-10K Mag-Stripe Access System is a cutting-edge access control solution designed for environments that require robust security and reliable performance. This system is well-suited for various applications, including commercial buildings, educational institutions, and industrial facilities. With its advanced technology and user-friendly design, the SR-10K provides a comprehensive security platform that streamlines access management.

One of the main features of the SR-10K is its compatibility with both magnetic stripe cards and ISO 7810-compliant cards. This flexibility allows organizations to implement existing card technologies without the need for extensive infrastructure changes. The system supports both single-door and multi-door configurations, making it adaptable to different facility requirements.

The SR-10K includes a powerful embedded controller that ensures efficient processing of access control transactions. This controller leverages smart technology to manage access rights and monitor activities in real-time, providing operators with immediate insights into system status. Additionally, it incorporates a user-friendly interface, allowing for straightforward programming and administration of the access control system.

Durability is a key characteristic of the SR-10K, as it is designed to withstand the rigors of everyday use in demanding environments. The system features weather-resistant components, making it suitable for both indoor and outdoor installations. This robustness contributes to the overall reliability of the security solution, reducing maintenance and operational costs over time.

The SR-10K also integrates seamlessly with existing security infrastructures, supporting various communication protocols such as Wiegand and RS-485. This connectivity allows organizations to enhance their security measures by integrating the access control system with surveillance cameras, alarms, and other security devices. The SR-10K can be easily scaled to accommodate future growth, ensuring that the system remains effective as security needs evolve.

In addition to its technical features, the SR-10K prioritizes user experience. The system offers intuitive software for system management, which simplifies the process of managing user profiles, access permissions, and activity logs. This accessibility ensures that security personnel can effectively monitor and respond to access events.

Overall, the Mercury SR-10K Mag-Stripe Access System stands out as a versatile and reliable access control solution. Its combination of advanced features, robust construction, and ease of use makes it an ideal choice for organizations seeking to enhance their security while maintaining operational efficiency.
Top Page Image Contents