Mercury PR0091 manual Specification General Power requirements, Relays

Page 16

Mercury 6-5 Stat – Installation & User Guide

Specification

 

General

 

Power requirements:

 

Supply Voltage Range:

100 - 240 Vac ±10%

Supply Frequency:

50 - 60 Hz ±10%

Maximum supply current:

<1 Amp (With no relay loads)

Typical supply current:

<0.5 Amp

Operating temperature range:

+50C to +500C

Operating Humidity:

80% maximum

Storage temperature range:

-200C to +650C

Environmental:

Indoor use at altitudes up to 2000m, Pollution Degree 1,

 

Installation Category II.

 

Voltage fluctuations not to exceed ±10% of nominal voltage

Size:

110mm (W) x 60mm (H) x 100mm (D)

Weight:

150 Grams

Safety:

EN61010

EMC:

EN61326; 1997 +Amdt. A1; 1998

Ventilation:

There is no requirement for forced cooling ventilation

Class 2 Insulation:

No protective Earth is required and none should be fitted.

The host equipment must provide a suitable external over-current protection device such as: -

Fuse:

6.3A 240 Vac Antisurge (T) HRC conforming to IEC 60127

Or MCB:

8A, 240 VAC Type C conforming to BS EN 60898

The host equipment must provide adequate protection against contact to hazardous live parts.

Relays

 

 

Max current relay 1:

6A (non inductive)

 

Max Voltage relay 1:

260Vac (external supply)

 

Exclusive common

 

 

Max current relay 2:

4A (non inductive)

Relays 2 and 3 share a common

Max Voltage relay 2:

260Vac (external supply)

supply line and the loads can

Shared common with relay 3

 

have a combined total of 8A.

 

 

Relay 2 or 3 can switch a maximum

Max current relay 3:

4A (non inductive)

of 6A provided the other is at 2A or.

Max Voltage relay 3:

260Vac (external supply)

lower.

Shared common with relay 2

 

 

Max current relay 4:

3A (non inductive)

 

Max Voltage relay 4:

260Vac (Internal supply)

 

Common connected to Input "live"

 

 

Max current relay 5:

3A (non inductive)

 

Max Voltage relay 5:

260Vac (Internal supply)

 

Common connected to Input "live"

 

 

For compliance with the LVD, relays 2 and 3 common must be at the same potential as the supply voltage.

!

Warning:

 

 

Relays 4 and 5 outputs have hazardous voltages (Supply input voltage potential).

 

 

Ensure that all power is

 

 

 

switched off before

 

 

 

installing or maintaining

 

 

 

this product

Revision 1.2

Page 16 of 21

Image 16
Contents Mercury Channel Thermostat Installation Guide Table of Contents Configuration From Resource Data ManagementDescription Display value Type M Channel Thermostat NetworkConnections Ch Thermostat Description Alarm Action Switched ResistorDo not connect an earth Input/Output Allocation Tables Set-up Mode Set-up through front buttons Setting up the controllerSet-up Function Menu Display Option Explained in Paragraph Recommended set-up method Type. view controller typeRevision Mercury 6-5 Stat Installation & User Guide Probe Fault Units and Probe TypeIP Futura module Network ConfigurationIP-r Over-ride Operation Thermostat Over-rideChannel Timer Normal OperationFrost Detect InvertThermostat Cooling/Heating Operation Cooling Thermostat graph Heating Thermostat graphDisplay Messages ViewingDisplay System status Alarm text Type Network AlarmsGP Timer Set-up Specification General Power requirements RelaysInputs Fixing Panel Cut-outClearances Wiring Over-ride input ResistorsCleaning FuseRevision History

PR0091 specifications

Mercury PR0091 is a pioneering device that seamlessly integrates cutting-edge technologies to deliver exceptional performance and versatility across various applications. This innovative product has been designed with a strong focus on user experience, featuring advanced functionalities that cater to the evolving needs of users.

One of the standout features of the Mercury PR0091 is its robust processing capability. Equipped with a high-performance processor, it ensures swift operation and efficient multitasking. Whether used for professional tasks, creative endeavors, or entertainment, the device handles demanding applications with ease, providing users with a seamless experience.

Another significant characteristic of the Mercury PR0091 is its high-resolution display. The device boasts an impressive screen that delivers vibrant colors and sharp visuals, making it ideal for viewing high-definition content, graphics-intensive tasks, and engaging in immersive gaming experiences. Users can enjoy crystal-clear clarity, ensuring that every detail is vividly presented.

The connectivity options available on the Mercury PR0091 are extensive, including Wi-Fi, Bluetooth, and multiple USB ports. This ample connectivity ensures that users can easily link the device with other peripherals and systems, enhancing productivity and convenience. Whether connecting to external displays, storage devices, or other electronic gadgets, users will find that Mercury PR0091 is equipped to handle their networking needs.

In terms of design, the Mercury PR0091 showcases an elegant and ergonomic form factor that combines aesthetics with functionality. Its lightweight build makes it highly portable, making it suitable for on-the-go users who need reliable performance without the bulk. The sleek design also appeals to style-conscious consumers, embodying a modern and professional look.

Security features are also integral to the Mercury PR0091. With advanced encryption and biometric authentication, users can trust that their data is safe from unauthorized access. This is particularly relevant in today's digital landscape where data privacy is paramount.

Additionally, the Mercury PR0091 is built with sustainability in mind. Utilizing eco-friendly materials and energy-efficient technologies, it minimizes its environmental impact while still delivering top-notch performance.

In conclusion, the Mercury PR0091 is a versatile and powerful device equipped with a range of features and technologies that make it a standout choice for various applications. With its high-performance processing, superior display, extensive connectivity, elegant design, enhanced security, and commitment to sustainability, it meets and exceeds the diverse demands of modern users.