Breckwell Breckwell Hearth Products LUXURY SERIES Installation, Specifications, Preparation

Page 5

INSTALLATION

SPECIFICATIONS

Width: 23 1/8”

Height: 30 ½”

Depth: 22 ¼”

Weight: 233 lbs.

Flue size: 3” or 4”

Hopper Capacity: Up to 50 lbs.

(This can vary widely depending on pellet size, length, and diameter)

EPA status: exempt

Burn time: 1 lb. to 5.5 lbs. per hour

BTU range: 8,200 to 50,000

Approved installations: mobile home, alcove, conventional

 

 

FIGURE 1

PREPARATION

 

 

 

 

 

 

5

Factory packaging must be removed, and some minor assembly work is required prior to installation. Access to the rear of the stove is necessary.

NOTE: Normally, your dealer will perform these functions.

CLEARANCES

The Breckwell P2700 Freestanding has been tested and listed for installation in residential, mobile home and alcove applications.

FLOOR PROTECTION: Freestanding installations, minimum 24” wide by 29” deep. The stove must be placed on a continuous (grouted joints) noncombustible material such as ceramic tile, cement board, brick, 3/8” millboard or equivalent, or other approved or listed material suited for floor protection. NOTE: ceramic tile, or any tile, requires a continuous sheet beneath to prevent the possibility of embers falling through to the combustible floor if cracks or separation should occur in the finished surface, this would include floor protection for Built-in raised hearths. Check local codes for approved alternatives.

Clearances are measured from the sides, back and face (door opening) or stove body (refer to fig. 3).

DO NOT USE MAKESHIFT MATERIALS OR COMPROMISES IN THE INSTALLATION OF THIS UNIT.

INSTALL VENT WITH CLEARANCES SPECIFIED BY THE VENT MANUFACTURER.

FIGURE 2

FLOOR PROTECTION

(MINIMUM 24” W X 29” D)

FIGURE 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Luxury Series P2700 Fuel IntroductionSafety Precautions Table of Contents Specifications InstallationPreparation ClearancesWhen Outside AIR is not Used INSTALLATION9Combustion AIR Supply VentingHorizontally Through Wall refer to Figure P2700 InstallationEquivalent Vent Length EVL Vertically Into Existing Chimney System Vertically with NEW Chimney System Refer to FigureSee Combustion AIR Supply Electrical InstallationSpecial Mobil Home Requirements Operation PRE-START-UP Check Proper FuelBuilding a Fire Hotrod Automatic FirestarterShutdown Procedure Breckwell Maintenance ToolSafety Features RE-STARTING a Warm StoveThermostat Installation Thermostat InstallationOptional Thermostat ∙ a Millivolt Thermostat is RequiredPlease Read this ASH Removal MaintenanceASH Disposal Vacuum USEBlowers CleaningRecommended Maintenance Schedule Chimney CleaningRemoval and Replacement of Broken Door Glass Daily Weekly Annually or per TonPossible Causes Troubleshooting GuideStove Shuts OFF and the # 2 Light Flashes Stove Shuts OFF and the # 3 Light Flashes Possible Causes Possible Remedies Stove Feeds PELLETS, but will not IgniteSmoke Smell Coming Back Into the Home Convection Blower Shuts OFF and Comes Back onFuel feed light is on, you have a bad control board Troubleshooting Guide Heat Level Setting P2700 High Limit Switch Keeps TrippingSmoke Smell or Soot BUILD-UP Digital Circuit Board Timing RatesElectrical Diagram LOG Replacement PartsLifetime Limited Warranty
Related manuals
Manual 4 pages 6.56 Kb

Breckwell Hearth Products LUXURY SERIES, P2700 specifications

The Breckwell P2700 is a top-tier pellet stove from the esteemed Breckwell Hearth Products Luxury Series. This model is designed to offer not only efficient heating solutions but also to enhance your living space with its elegant design. The P2700 is ideal for homeowners seeking both functionality and aesthetic appeal in their heating equipment.

One of the standout features of the Breckwell P2700 is its high heat output capability, which allows it to efficiently heat larger areas. With a maximum output of up to 50,000 BTUs, this stove can easily warm rooms and open-concept spaces, making it perfect for residential environments. This robust performance is paired with adjustable heat settings, providing users with the ability to control the temperature according to their comfort levels.

The P2700 brings the latest technology to the forefront with its advanced electronic control system. This system features a programmable thermostat that allows homeowners to set specific heating schedules tailored to their lifestyles. Additionally, this model is equipped with a digital display that provides real-time information on the stove’s operation, including temperature settings and pellet feed rates.

Breckwell has also prioritized user convenience with the P2700. The integrated hopper can hold up to 60 pounds of pellets, which means less frequent refueling and uninterrupted heating sessions. The hopper is designed for easy access, and the unit features a convenient cleaning system to streamline maintenance. With a simple pull of a lever, users can remove ash and debris, ensuring that the stove operates at peak efficiency.

Another noteworthy characteristic of the Breckwell P2700 is its environmentally friendly design. Pellet stoves are known for producing low emissions compared to traditional wood-burning stoves, and the P2700 is no exception. It meets stringent EPA standards, making it a responsible choice for eco-conscious consumers.

The aesthetic appeal of the P2700 cannot be overlooked. With its sleek, modern design and choice of finishes, it seamlessly integrates into any décor. The large viewing window offers a captivating view of the flames, creating a warm, inviting ambiance in any room.

In summary, the Breckwell P2700, part of the Luxury Series, stands out as a powerful, efficient, and stylish heating option. With its high BTU output, advanced technology, user-friendly features, eco-friendly performance, and elegant design, it represents an exceptional choice for anyone looking to enhance their home’s comfort and warmth.
Top Page Image Contents