Product Specifications
Specifications
| GSH13 | GSH13 | GSH13 | GSH13 | GSH13 | GSH13 | GSH13 |
| 0181C* | 0241C* | 0301C* | 0361C* | 0421B* | 0481B* | 0601A* |
|
|
|
|
|
|
|
|
Capacities and Ratings |
|
|
|
|
|
|
|
Tonnage | 1½ | 2 | 2½ | 3 | 3½ | 4 | 5 |
Decibels | 73 | 71 | 72 | 71 | 76 | 76 | 77 |
|
|
|
|
|
|
|
|
Compressor |
|
|
|
|
|
|
|
RLA | 8.3 | 10.8 | 13.5 | 14.1 | 19.2 | 19.9 | 25.0 |
LRA | 40.3 | 56.0 | 68.0 | 75.0 | 112.0 | 104.0 | 148.0 |
Type | Scroll | Scroll | Scroll | Scroll | Scroll | Scroll | Scroll |
|
|
|
|
|
|
|
|
Condenser Fan Motor |
|
|
|
|
|
|
|
Horsepower | 1/8 | 1/8 | 1/8 | ¼ | ¼ | ¼ | 1/6 |
FLA | 0.7 | 0.7 | 0.7 | 1.5 | 1.5 | 1.5 | 1.1 |
|
|
|
|
|
|
|
|
Refrigerant System |
|
|
|
|
|
|
|
Refrigerant Line Size |
|
|
|
|
|
|
|
Liquid Line Size (“O.D.) | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" |
Suction Line Size (“O.D.) | ¾" | ¾" | ¾" | ⅞" | 1⅛" | 1⅛" | 1⅛" |
Refrigerant Connection Size |
|
|
|
|
|
|
|
Liquid Valve Size (“O.D.) | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" | ⅜" |
Suction Valve Size (“O.D.) | ¾" | ¾" | ¾" | ⅞" | ⅞" | ⅞" | ⅞" |
Valve Type | Sweat | Sweat | Sweat | Sweat | Sweat | Sweat | Sweat |
Refrigerant Charge | 127 | 122 | 130 | 188 | 246 | 208 | 233 |
|
|
|
|
|
|
|
|
Electrical Data |
|
|
|
|
|
|
|
Minimum Circuit Ampacity ² | 11.1 | 14.2 | 17.6 | 19.1 | 25.5 | 26.4 | 32.3 |
Max. Overcurrent Protection ³ | 15 | 25 | 30 | 30 | 40 | 45 | 50 |
Min / Max Volts | 197/253 | 197/253 | 197/253 | 197/253 | 197/253 | 197/253 | 197/253 |
Electrical Conduit Size | ½" or ¾" | ½" or ¾" | ½" or ¾" | ½" or ¾" | ½" or ¾" | ½" or ¾" | ½" or ¾" |
|
|
|
|
|
|
|
|
Equipment Weight (lbs) | 142 | 147 | 146 | 146 | 152 | 152 | 278 |
Ship Weight (lbs) | 159 | 164 | 164 | 164 | 170 | 170 | 300 |
|
|
|
|
|
|
|
|
¹ Tested and rated in accordance with AHRI Standard 210/240
²Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes ³ Must use
Notes
•Always check the S&R plate for electrical data on the unit being installed.
•Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
•Charge to be added for 15’ of ⅜” liquid line. System charge must be adjusted per Installation Instructions Final Charge Procedure.
•Installation of these units requires the specified TXV Kit to be installed on the indoor coil. THE SPECI-
FIED TXV IS DETERMINED BY THE OUTDOOR UNIT NOT THE INDOOR COIL.
www.goodmanmfg.com | 3 |