White Rodgers P200 installation instructions Table of Contents

Page 2

Failure to read and follow all instructions carefully before installing or operating this control could cause personal injury and/or property damage.

The thermostat may stop controlling temperature and your house

may freeze or overheat when batteries are too low. Batteries must

be changed when

or

appears on

the display.

 

 

ATTENTION: MERCURY NOTICE

This product does not contain mercury. However, this product may replace a product that contains mercury. Mercury and products containing mercury must not be discarded in household trash. Do not touch any spilled mercury. Wearing non-absorbent gloves, clean up any spilled mercury and place in a sealed container. For proper disposal of a product containing mercury or a sealed container of spilled mercury, place it in a suitable shipping container.

Refer to www.White-Rodgers.comfor location to send product containing mercury.

These symbols are used throughout this User Guide.

Watch for them to identify:

Cautions

Tips

Programmable Features

TABLE OF CONTENTS

Part 1: Before Getting Started

Page 2

1.1Check package contents

1.2Answer questions about source of heating in your home

1.3Assemble tools

1.4Turn off power to your heating and cooling system

Part 2: Remove Old Thermostat and Install New Thermostat .... Page 4

2.1Expose wires connected to old thermostat

2.2Label and disconnect the wires

2.3Install new thermostat’s wallplate

2.4Match and connect wires

2.5Set switch

2.6Install batteries

2.7Snap thermostat to the wallplate

Part 3: Quick Setup

Page 13

3.1Get to know your thermostat

3.2Set fan and system switches

3.3Select options

3.4Turn on power to your heating and cooling system

3.5Set time and date

3.6Review pre-programmed schedule

Part 4: Additional Thermostat Features

Page 18

4.1Customize the pre-programmed schedule

4.2Set temporary hold at

4.3Bypass the schedule (permanent hold)

4.4Set change filter reminder

4.5Change batteries

4.6Adjust actual temperature display

Part 5: Troubleshooting Guide

Page 24

1

Image 2
Contents Installation Instructions & User Guide White-Rodgers.comTable of Contents Assemble tools Turn off power to your heating and cooling systemPart 1 Before Getting Started Part 2 Remove Old Thermostat and Install New Thermostat Expose wires connected to old thermostatTerminal on the thermostat Label and disconnect the wiresWires leading from the wall to a These don’t have to be labeledTerminal is wired into the wall Identified by this letter… This letterInstall new thermostat’s wallplate Match and connect wiresPart 3 Quick Setup Select options Congratulations Customize the pre-programmed schedule Part 4 Additional thermostat featuresCancel the override by pressing the RUN button Set temporary hold atSet change filter reminder Use the buttons to raise or lower the desired temperatureBypass the schedule Adjust actual temperature display Change batteriesPart 5 Troubleshooting Guide Troubleshooting Guide

P200 specifications

The White Rodgers P200 is a versatile and reliable thermostat that is designed to meet the demands of today’s modern HVAC systems. This product stands out due to its user-friendly interface, advanced technology, and energy-efficient operation, making it a popular choice for both residential and commercial applications.

One of the main features of the P200 is its ability to control both heating and cooling systems. This allows for year-round climate control, ensuring comfort regardless of the season. The thermostat is compatible with a range of HVAC systems, including gas, oil, and electric furnaces, as well as heat pumps and central air conditioning units. This flexibility makes it suitable for various home and office setups.

The P200 boasts a digital display that provides clear and easy-to-read temperature settings. The backlit screen ensures visibility in low-light conditions, so users can adjust settings at any time of the day. Enhanced programming options allow users to create customized schedules, maximizing comfort while minimizing energy usage. With up to seven-day programming capabilities, consumers can tailor their heating and cooling needs to fit their daily routines.

Another notable characteristic of the White Rodgers P200 is its energy-saving functionality. The thermostat features an energy management system that allows for precise temperature control. By maintaining comfortable temperatures and reducing unnecessary heating and cooling, users can significantly lower their energy bills while contributing to environmental sustainability.

In addition to its energy-saving features, the P200 comes equipped with advanced technologies such as adaptive recovery. This innovation allows the thermostat to learn how long it takes to heat or cool a space and adjusts the start time accordingly. As a result, rooms reach the desired temperature just in time for when they are occupied, enhancing overall comfort.

The White Rodgers P200 is also designed with ease of installation in mind. Its user-friendly setup process allows homeowners or HVAC professionals to install it quickly without the need for special tools or extensive technical knowledge. The thermostat can be mounted on standard wall plates, further simplifying the installation process.

Overall, the White Rodgers P200 is a comprehensive solution for anyone looking to efficiently manage their indoor climate. Its combination of advanced technology, user-friendly features, and compatibility with various HVAC systems makes it an excellent investment for comfort and energy savings.