Installation, As a Fireplace | Heat & Glo LifeStyle CF260E-B

4Installation

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

A. As a Fireplace

Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high trafﬁc areas.

Note: Follow all national and local electrical codes.

WARNING

Shock Risk

Improperly grounded outlets could cause electrical shock.

•Always use properly grounded, fused and polarized outlets.

•Always use ground fault protection where required by electrical code.

WARNING

Shock Risk

Fire Risk

Improperly protected power cords could cause electrical shock or ﬁ re.

•Do not pinch the cord or lay against a sharp object.

•Do not cover the cord with carpeting, throw rugs or runners.

•Secure and arrange cord to avoid a tripping hazard.

•Do not coil cord.

Wall Cabinet Kit, Corner Cabinet Kit or Custom Cabinet Installation

The Cabinet must provide access to the wall outlet.

•For ease of electrical hookup, you may wish to install the heater near an existing outlet. A 15 amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit trips or fuse blows on a regular basis while the heater is operating. Additional heaters on the same circuit may exceed the current rating of the circuit breaker.

•If using a wall cabinet or corner cabinet, refer to the installation instructions supplied with the kit. For custom cabinets, frame and construct with the opening and depth dimensions listed in Figures 3.1 and 3.2.

•Before plugging the heater into the wall outlet, make sure all control switches are in the “OFF” position.

• Before ﬁnishing the cabinet, the heater must be set into the cabinet and the power cord routed to the electrical outlet. If the power cord does not reach the outlet, a No. 16-AWG minimum wire size extension cord rated for a minimum of 1875 watts may be used. Use minimum length and do not coil cord.

•To complete the heater installation, refer to Section 5.

Non-Cabinet or Chase Installation

•Follow recommended framing dimensions in Figures 3.1 and 3.2.

•Set the heater into the framed opening. Secure the heater in place using the nailing ﬂ anges on both sides of the heater and nail to the framing.

•To ﬁ nish out the heater, follow the instructions found in Section 6.

•To complete heater installation, see Section 5.

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05

CF260E-B, CF230E-B specifications

The Heat & Glo LifeStyle CF230E-B and CF260E-B are two exceptional gas fireplace models that embody modern design and cutting-edge technology, suited for contemporary living spaces. Both models deliver an efficient heating solution while enhancing the aesthetic appeal of any room.

One of the standout features of the CF230E-B and CF260E-B is their sleek, clean face design. This minimalist style allows for a seamless integration into various interior design schemes, making them perfect focal points for modern homes. The elegant ember bed radiates warmth and ambiance, creating a cozy atmosphere perfect for gatherings or relaxation.

Both models utilize advanced technology to ensure optimal performance. The IntelliFire Touch ignition system provides an easy-to-use, battery-operated solution for lighting the fireplace. This user-friendly feature not only simplifies operation but also enhances safety by eliminating the need for matches or lighter tools.

In terms of efficiency, the LifeStyle series promotes heat distribution technology that ensures consistent warmth throughout your living space. With adjustable heat settings, users have the flexibility to customize their comfort level while maintaining efficient energy use. The CF260E-B model, in particular, boasts a higher BTU output, making it a suitable choice for larger areas needing substantial heating.

The environmental impact is also a consideration with the LifeStyle fireplaces. Both models are designed to minimize emissions without compromising on performance. Their focus on efficiency aligns with the growing demand for eco-friendly heating solutions.

Another notable aspect of these fireplaces is the customizable flame and ember bed options. Users can choose from a variety of log sets, colors, and flame heights, allowing for personalized design and ambiance to match individual preferences.

Safety is paramount in the design of the CF230E-B and CF260E-B. They come equipped with a safety screen and a reliable shut-off valve to prevent overheating and ensure peace of mind, especially in homes with pets or children.

In summary, the Heat & Glo LifeStyle CF230E-B and CF260E-B models are a blend of aesthetic appeal, advanced technology, and eco-friendly performance. With their stylish designs, efficient heating capabilities, and user-friendly features, they stand out as exceptional choices for homeowners looking to enrich their spaces with warmth and elegance. Whether for intimate settings or larger gatherings, these fireplaces are poised to enhance comfort and sophistication in any home.