Ceramic

Step 10. Installing Trim, Logs, and Ember Material

Installing the Trim

Combustible materials may be brought up to the specified clearances on the side and top front edges of the fireplace, but MUST NEVER overlap onto the front face. The joints between the finished wall and the fireplace top and sides can only be sealed with a 300° F. (149° C) minimum sealant.

!WARNING: WHEN FINISHING THE FIREPLACE, NEVER OBSTRUCT OR MODIFY THE AIR INLET/ OUTLET GRILLES IN ANY MANNER.

Install optional marble and brass trim surround kits as desired. Marble, brass, brick, tile, or other non-combustible materials can be used to cover up the gap between the sheet rock and the fireplace.

Do not obstruct or modify the air inlet/outlet grilles. When overlapping on both sides, leave enough space so that the bottom grille can be lowered and the trim door removed.

Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the instructions that accompany the logs. Save the log instructions with this manual.

If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.

Placing the Ember Material

Ember material is shipped with this gas fireplace. The bag labeled Glowing Ember (050-721) is standard glowing ember material.

To place the ember material:

•Pull the four glass latches out of the groove on the glass frame. Lift trim door up and out of the unit (see Figure 30).

•Place dime size pieces of ember material about 1/2 inch apart near port holes in burner top. Do NOT press em- bers into burner ports. Cover the top of the burner with a single layer of ember material. For best performance do NOT place embers on the ports at the rear of the burner.

•Save the remaining ember materials for use during fire- place servicing. The bag of embers provided is sufficient for 3 to 5 applications.

•Replace the glass door and a front trim door on the unit.

•Pull out and latch the glass clips into the groove on the glass frame.

Figure 30. Glass Assembly

Glass Specifications:
7000XLT:	24 1/2 X 35 1/2	CERAMIC
6000XLTB:	24 1/2 X 35 1/2	CERAMIC
7000XLT
6000XLTB
Figure 31.	Placement of the Ember Material

CAUTION: IT IS STRONGLY RECOMMENDED THAT TRIM DOORS WITH OPTIONAL MESH SCREENS BE IN- STALLED ON PROPANE MODELS.

7000XLT specifications

The Heat & Glo LifeStyle 7000XLT is an innovative gas fireplace that combines style, efficiency, and technology, making it a popular choice for homeowners seeking to enhance their living spaces. With a sleek design and impressive performance, the LifeStyle 7000XLT captures the aesthetic appeal of a traditional fireplace while providing the convenience of modern heating solutions.

One of the standout features of the LifeStyle 7000XLT is its expansive viewing area. The fireplace boasts an impressive 50-inch wide glass front that allows for an unobstructed view of the flames, creating a stunning focal point in any room. The large glass surface not only enhances the visual appeal but also maximizes the heat output, ensuring that the room is efficiently warmed.

This model integrates advanced technology to provide homeowners with a tailored heating experience. The IntelliFire ignition system is a state-of-the-art feature, offering reliable and efficient lighting of the fireplace. This system eliminates the need for matches or lighter fluid, providing a hassle-free experience each time the fireplace is used. Additionally, the remote control capability enables users to adjust the flame height and heat settings with ease, adding a layer of convenience to the fireplace operation.

The LifeStyle 7000XLT is designed with energy efficiency in mind. It features a direct vent system, which allows for the safe and efficient venting of combustion gases. This not only enhances indoor air quality but also optimizes heat retention within the home. The fireplace achieves high-efficiency ratings, making it an eco-friendly heating option that helps reduce energy costs.

In terms of customization, the Heat & Glo LifeStyle 7000XLT offers a variety of styles and finishes. Homeowners can choose from different faces, accent lighting, and decorative media options, such as logs, stones, or glass, to create a unique look that complements their interior décor.

Safety is a paramount concern in modern fireplaces, and the LifeStyle 7000XLT does not disappoint. It is equipped with a safety pilot system that automatically shuts off the gas supply if the flame goes out, ensuring peace of mind for users.

In conclusion, the Heat & Glo LifeStyle 7000XLT is a remarkable gas fireplace that offers an exceptional blend of style, technology, and efficiency. Its large viewing area, advanced ignition and control systems, energy-efficient design, customization options, and safety features make it an excellent choice for any homeowner looking to create a warm and inviting atmosphere.