White Rodgers 1F87-361 Operation, Configuration Menu, Thermostat Buttons and Switches, Display

Page 4

OPERATION

Before you begin programming your thermostat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. Your thermostat con- sists of two parts: the thermostat cover and the base. To remove the cover, pull it straight out from the base. To replace the cover, line up the cover with the base and press until the cover snaps onto the base.

The Thermostat Buttons and Switches

1Raises temperature setting.

2Lowers temperature setting.

3TIME button.

4PRGM (program) button.

5RUN (run program) button.

6HOLD temperature button.

7FAN switch (ON, AUTO).

8SYSTEM switch (COOL, OFF, HEAT).

The Display

9Indicates day of the week.

10Flame icon () is displayed when the SYSTEM switch is in the HEAT position. Snowflake icon ()is displayed (non- flashing) when the SYSTEM switch is in the COOL position. Snowflake is displayed (flashing) if the thermostat is in lockout mode to prevent the compressor from cycling too quickly.

11Displays “BATT” when the 2 "AA" batteries are low and should be replaced. Only “BATT” and “LO” in the minutes field are displayed when batteries are low with no system power.

12Alternately displays current time and temperature. Dis- plays “LO” in the minutes field when batteries are low.

13The word “HOLD” is displayed when the thermostat is in the HOLD mode. “HOLD” is displayed flashing when the thermostat is in a temporary HOLD Mode.

14Displays currently programmed set temperature (this is blank when SYSTEM switch is in the OFF position).

15Displays “FLTR” when the system has run for the pro- grammed filter time period as a reminder to change or clean your air filter.

CONFIGURATION MENU

The configuration menu allows you to set certain thermostat operating characteristics to your system or personal require- ments.

Press RUN to make sure the thermostat is in the run program mode, then press PRGM and RUN at the same time to enter the configuration menu. The display will show the first item in the configuration menu.

The configuration menu table summarizes the configuration options. An explanation of each option follows.

Press HOLD to change to the next menu item or press TIME to go backwards to the previous item in the menu. To exit the menu and return to the program operation, press RUN. If no keys are pressed within fifteen minutes, the thermostat will revert to normal operation.

1)Select Temporary Hold Time - The thermostat can hold any temperature you set it to for the amount of time you select on this option. Your choices are 0:00 to 8:00 hours in 15 minute increments. 0:00 disables the function Example:

1.You have selected 3:00 hours for the Temporary Hold time period.

2.With the thermostat set to Heat or Cool, press HOLD for approximately five seconds until HOLD time (3:00 indicating 3 hours) appears as a setting reminder.

3.After releasing the button, “HOLD” on the display will blink.

4.Use or to set the temperature to your prefer- ence. The thermostat will maintain this temperature setting for 3 hours with “HOLD” blinking to remind you it is in Temporary Hold. After 3 hours the thermostat will go back to the program temperature and “HOLD” will no longer blink or display.

2)Select FA or SL (Fast or Slow) Heating Cycle Rate - The FA setting is frequently used for gas, oil or electric heat. The SL setting produces a longer heating cycle which is nor- mally for hot water or steam (hydronic) systems. Both settings produce very accurate temperature control and can be set to your personal preference. FA cycles the system just under 1°F and the SL setting cycles at approxi- mately 1.5°F.

3)Select backlit display - The display backlight improves display contrast in low lighting conditions. Selecting back- light ON will keep the light on for a short period of time after any key is pressed. Selecting OFF will keep the light off.

4

Image 4
Contents Specifications PrecautionsDescription Installation Remove OLD ThermostatAttach Thermostat Base to Wall Check Thermostat OperationHeating System Cooling SystemConfiguration Menu Thermostat Buttons and SwitchesOperation DisplayConfiguration Menu Operating FeaturesProgramming Your Thermostat Planning Your Program Entering Your ProgramEnter Heating Program Set Current Time and DayTroubleshooting Symptom Possible Cause Corrective ActionReset Operation Enter Cooling ProgramNo Cool Heat, Cool or Fan Runs ConstantlyDisagree Clock Loses or Gains Time

1F87-361 specifications

The White Rodgers 1F87-361 is a distinguished programmable thermostat designed to enhance energy efficiency and comfort in residential heating and cooling systems. With a user-friendly interface and a range of advanced features, this device stands out in the marketplace for its reliability and ease of use.

One of the main features of the 1F87-361 is its intuitive 7-day programmable scheduling. This allows users to customize their heating and cooling preferences for each day of the week, ensuring optimal comfort at all times. Additionally, the device is equipped with a backlit display, making it easy to read settings and temperatures, even in low-light conditions.

The technology harnessed in the 1F87-361 includes advanced temperature control algorithms, which optimize the heating and cooling cycles of HVAC systems. This not only helps to maintain stable indoor temperatures but also contributes to significant energy savings. The thermostat is designed to be compatible with most heating and cooling systems, including gas, oil, and electric furnaces, as well as heat pumps.

Moreover, the White Rodgers 1F87-361 incorporates a built-in adaptive recovery feature. This intelligent technology learns the thermal characteristics of your home, allowing the thermostat to anticipate the time needed to reach the desired temperature. This proactive approach reduces energy waste while ensuring that your living space is comfortable when you need it the most.

Another noteworthy characteristic is the device's ability to provide real-time temperature readings and system status updates. Users can easily monitor their home's temperature remotely and make adjustments as required. This is complemented by the optional Wi-Fi connectivity feature, which allows integration with smart home systems and mobile applications for even greater control and convenience.

The White Rodgers 1F87-361 also prioritizes user convenience with its simple installation process. With clear instructions and a straightforward wiring design, both DIY enthusiasts and professional installers can set it up with minimal hassle. Additionally, the device supports a battery backup system, ensuring continued operation during power outages.

In conclusion, the White Rodgers 1F87-361 programmable thermostat combines advanced technology with user-friendly features to provide an optimal heating and cooling experience. Its programmable scheduling, adaptive recovery, and user-friendly design make it a valuable addition to any home seeking enhanced energy efficiency and comfort.