White Rodgers 90 manual Orientation, Thermostat Buttons

Page 4

ORIENTATION

THE THERMOSTAT BUTTONS

See inside front cover for illustration showing button locations.

1(Blue arrow) Lowers temperature setting (45°F or 7°C minimum)

2(Red arrow) Raises temperature setting (99°F or 37°C maximum)

3The multi-color indicator glows: green for 1st stage, yellow for 2nd stage, red for emergency heat and flashing red for malfunction condition in system.

4This button (on top of the cover) lights the display.

5Used to initiate or review thermo- stat programming or advance to next program period in programming mode.

6Used with TIME FWD /TIME BACK to set the clock.

7Used to adjust the time backward, or to select the previous menu item.

8Used to adjust the time forward, or to select the next menu item.

9Used with TIME FWD /TIME BACK to set the current day.

10Used to advance operation to the next program period or advance to the next day in programming mode.

11Used to manually override

programming to hold at a selected temperature.

12Used to enter and configure the VACATION mode.

13Selects fan operation (see The Display 21 ). This button is also used to program the fan to run continuously during a program period.

14Used to set the filter change-out time, or to reset the filter change timer.

15Sets the system mode (HEATing, EMERgency, OFF, COOLing, or AUTOmatic changeover).

16Used to adjust the clock one hour forward or back.

17Used to start or return to program operation.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Page Introduction Orientation Thermostat ButtonsDisplay Configuration User Menu Keypad Lockout Menu access from User Menu Programming Programmed Operation Planning Your ProgramEntering Your Program To Set the Clock To Set the DayFAN Sample Program Schedule Shows factory programming Personal Program Schedule Features Selectable Energy Management Recovery EMROutdoor Temperature Sense Fahrenheit or Celsius Tempera- ture DisplayOne Shot Fan Control Beeper onTraditional Features Automatic Changeover Factory Preprogrammed Times and TemperaturesActivate RUN PRG by Telephone Compressor Run Time and Auxiliary Run TimeAir Filter Change-Out Indicator Programmable Fan ControlSystem and Thermostat Diag- nostics Temporary Program OverrideOptional Remote Temperature Sense Programmable Vacation Time/ Temperature OperationIndefinite Program Hold Program View and ADV. to Large Lighted Liquid Crystal Display LCD Daylight Savings Time ButtonArm Chair Programming Thermostat Startup After Total Power Loss Features Index
Top Page Image Contents