White Rodgers 90 manual Programming, Programmed Operation Planning Your Program, To Set the Day

Page 9

PROGRAMMING

MANUAL OPERATION

Your Comfort-Set®90 Series thermo- stat can be used to control temperature manually (without programming). For manual operation, press SYSTEM to select HEAT or COOL, then press

PROGRAM HOLD . Use or to set the temperature as

desired.

PROGRAMMED OPERATION Planning Your Program

The sample schedule (page 9) shows the factory installed programs for heating and cooling. The heating and cooling programs are separate, and must be programmed individually. To use the factory program, set the clock and press PROGRAM RUN with the thermostat SYSTEM set to Heat, Cool, or Auto.

Fill out the blank schedule (page 10) with the time and temperatures you want in your program. Fill in every space for your program.

The same temperature can be repeated more than once if you do not want the temperature to change over several time periods.

Entering Your Program

To Set the Clock:

1.Press PROGRAM RUN .

2.Press SET TIME . The display will show the hour. Use TIME FWD or TIME BACK to set to the current hour and AM/PM designation.

3.Press SET TIME again. The display will show minutes. Use TIME

FWD or TIME BACK to set to the current minutes.

4.Press PROGRAM RUN .

7

To Set the Day:

5. Press SET DAY . The display will indicate a day of the week. Use TIME

FWD or TIME BACK to set to the current day of the week.

6.Press PROGRAM RUN .

To Set the Program:

7.Press SYSTEM to select HEAT (for heating program) or COOL (for cooling program).

8.Press PROGRAM VIEW one time. The display will show OCCU and the settings for time and temperature. The display will also show MON for Monday.

9.If you program Monday the first time you press PROGRAM VIEW it will be copied to the rest of the week. To program the other days of the week

press ADV. /DAY until you reach the

Programming

Image 9
Contents Page Page Introduction Thermostat Buttons OrientationDisplay Configuration User Menu Keypad Lockout Menu access from User Menu Programmed Operation Planning Your Program ProgrammingEntering Your Program To Set the Clock To Set the DayFAN Sample Program Schedule Shows factory programming Personal Program Schedule Selectable Energy Management Recovery EMR FeaturesFahrenheit or Celsius Tempera- ture Display Outdoor Temperature SenseOne Shot Fan Control Beeper onFactory Preprogrammed Times and Temperatures Traditional Features Automatic ChangeoverActivate RUN PRG by Telephone Compressor Run Time and Auxiliary Run TimeProgrammable Fan Control Air Filter Change-Out IndicatorTemporary Program Override System and Thermostat Diag- nosticsProgrammable Vacation Time/ Temperature Operation Optional Remote Temperature SenseIndefinite Program Hold Program View and ADV. to Daylight Savings Time Button Large Lighted Liquid Crystal Display LCDArm Chair Programming Thermostat Startup After Total Power Loss Index Features