Programming Tip Copy Program | White Rodgers 37-6753B specs

PROGRAMMING

Programming Tip: Copy Program

When programming your thermostat, you may copy the program from one day to another day or group of days using the Copy key. In 7 day programming mode, a day can be copied to another day or all six other days. In 5/1/1 day programming mode the weekday (Mon – Fri) program can be copied into Sat and Sun or either Sat or Sun.

To copy a program from one day to another:

1)In Set Schedule mode, enter the program for the day or select the day you wish to copy by pressing Advance Day.

2)Press Copy. The display will show “Copy” next to the SYSTEM key and the day of the week that will be copied.

3)Press Advance Day. The day being copied will be indicated and the other days will be flashing.

4)If you wish to copy to all days skip to next step or press Advance Day until the day you wish to copy to is flashing.

5)Press Copy. “Copy” will disappear, the day you copied from will disappear and the day(s) you copied to will be on.

6)If you wish to copy this same program into other days, press Copy and repeat steps 3, 4 and 5.

7)Press Run Schedule to return to normal operation.

Fill in the blank schedule on the next page then:

Enter the Heating Program

1)Press the Menu button and then press Set Schedule. Press SYSTEM button to select either "Heat" or "Cool" in the system switch area indicating the active mode being programmed. You can switch to the other mode by pressing the system switch at any time.

2)The top of the display will show the day(s) being pro- grammed. The time and set at temperature are also displayed. "Morning" will also be displayed to indicate the period.

3)Press or key to change the temperature to your selected temperature for the 1st heating period (Morning).

4)Press or key to adjust the start time for period. The time will change in 15 minute increments.

5)Press FAN to select Auto or Prog.

6)After you have set the time and the temperature for the period to begin, press Set Schedule to advance to the next program period.

7)Repeat steps 2 through 6 until all of the program times and temperatures are set for all program periods on that day.

8)Press "Advance Day" to change to the next day and repeat steps 2 through 8.

9)When programming is complete and all of the times and temperatures match your desired heating schedule, press Run Schedule. The thermostat will now run your program.

Enter the Cooling Program

1)Press the SYSTEM button until the Cool icon appears.

2)Follow Enter Heating Program instructions for entering cooling times and temperatures.

Automatic Schedule

This feature provides a method to program every day with the most popular time and temperature settings using one key. For this feature to be available, the Auto Schedule options (Installer/Configuration menu item 17, AS Heat, or item 18, AS Cool) must be selected On.

To use Auto Schedule, press Run Schedule to be sure you are in normal operating mode. In SYSTEM Heat mode, use theor keys to select your “Comfort Temperature”.

When your “Comfort Temperature” is selected, press Auto Schedule key. The key will begin to flash indicating that the feature is ready to store your selected temperature. Press Auto Schedule a second time to complete the process. The Auto Schedule key will disappear to indicate that the Auto Schedule command has been accepted.

In Heat mode the thermostat will maintain your “Comfort Temperature” during the Morning, Day and Evening periods and setback 6° for the Night. Morning period will begin at 6:30 AM and Night period will begin at 10:30 PM.

To set the Auto Schedule temperature for Cool mode, press SYSTEM to change the mode to Cool and repeat setting the temperature. In Cool mode, the thermostat will maintain your selected “Comfort Temperature” continuously.

The “Comfort Temperature” can be temporarily overridden by changing the setpoint temperature using the or keys. Once Auto Schedule has been set and the key has disap- peared, it can be reset in the Installer/ Configuration menu.

Entering Fan Program

In the Set Schedule mode, the FAN key is used to select the fan operation during a program period. The default state of the Fan key is FAN Auto (fan runs during a call for cool but not on a call for heat). It can be changed to FAN Prog (fan runs during a program period). Each press of the FAN key will change the mode of the fan between Auto and Prog. In the Run mode, when a program period that has FAN Prog begins, the fan will turn on and stay on during the complete period. The display will show FAN On Prog.

In the Run mode, pressing the FAN key will change the fan from Auto (default setting) to On (fan running continuously) or Prog. When FAN Prog is displayed, the fan will run when the system cycles. If the system does not cycle for more than 60 minutes, the thermostat will turn the fan on for 10 minutes and off for 20 minutes to improve indoor air quality. If the display shows FAN On Prog to indicate the program period has the fan programmed to run, FAN Prog will override the programmed setting until Run Schedule is pressed or the next schedule period begins.

37-6753B specifications

The White Rodgers 37-6753B is a high-performance thermostat designed to cater to the needs of both residential and light commercial applications. Recognized for its user-friendly interface and advanced features, this thermostat offers an ideal blend of functionality and sophistication.

One of the standout features of the 37-6753B is its ability to manage both heating and cooling systems effectively. It supports a wide range of HVAC configurations, including single-stage and multi-stage heat pumps, gas furnaces, and air conditioning systems. This versatility makes it an excellent choice for various settings, ensuring optimal comfort year-round.

The thermostat boasts a large, easy-to-read display that enhances usability. Users can quickly view and adjust temperature settings, making it simple to achieve their desired indoor climate. The intuitive button layout also facilitates seamless navigation through programming options and system settings.

A key technological advantage of the White Rodgers 37-6753B is its programmable capabilities. Users can create customized schedules to optimize energy use throughout the day. With the ability to set different temperature profiles for weekdays and weekends, the thermostat can significantly reduce energy consumption without sacrificing comfort.

Another notable feature is the inclusion of advanced temperature averaging technology. This feature ensures that the heating and cooling systems operate efficiently by measuring the temperature in multiple locations within a home. As a result, it can prevent hot or cold spots, leading to a more uniform indoor climate.

The 37-6753B is also equipped with a filter change indicator. This feature alerts users when it’s time to replace or clean the air filter in their HVAC system, promoting better air quality and system performance. Regular maintenance helps extend the lifespan of the heating and cooling units.

For added convenience, the thermostat can be powered either by batteries or through a C-wire connection, allowing for flexibility depending on your existing system's setup. The compact design also makes it easy to install, even for those with minimal technical expertise.

In summary, the White Rodgers 37-6753B thermostat is a technologically advanced solution for managing indoor climates efficiently. Its programmable features, temperature averaging technology, and user-friendly design make it a standout choice for homeowners and light commercial users alike, ensuring reliable temperature control and energy savings.