Drolet SIT 0.820.634 Nova manual Installation, Safety notice, Clearances to combustibles

Page 6

EXCEL-FIRE GAS STOVE

5

INSTALLATION

Safety notice

Improper installation may result in a house fire. Follow installation directions. Installation must be in accordance with local building codes or, in the absence of local codes, with current CAN/CGA B 149 installation codes for gas appliances in Canada and current National Fuel Gas Code ANSI Z223.1 in the USA.

Installation should be done by a qualified installer.

This gas stove must be vented outside.

When installed with optional blower or hand held remote, must be electrically grounded in accordance with local codes or, in the absence of local codes, with THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70, or the CANADIAN ELECTRICAL CODE, CSA C22.1.

Because of high operating temperatures, the EXCEL-FIRE should be located away from high traffic areas, furniture, curtains, and other combustible material.

Always locate the stove as near as possible to an outside wall to keep horizontal vent length to a minimum.

Provide adequate accessibility clearances for servicing and proper operation.

Never install the stove in a hallway or near a staircase as it may block the way in case of a fire.

Provide adequate clearances around air openings into the combustion chamber..

If the appliance is being installed on combustible flooring, such as directly on carpeting, tile, or other combustible material other than wood flooring, the appliance shall be installed on a metal or wood panel extending the full width and depth of the appliance.

A gas appliance must not be connected to a chimney flue serving a separate solid-fuel burning appliance.

Now you have decided where to install your stove, you are ready to start the installation

Move the EXCEL-FIRE to the desired position. Mark the location for the gas inlet pipe and the location where the vent pipes will go. Remove the appliance.

Route a 3/8" NPT minimum iron pipe gas line to the desired location.

Install a shutoff valve to the gas line. Tighten securely using a pipe joint compound

NOTE: The valve includes two ¼” tapings for test gauge connection. You may need, however, to install a 1/8” plugged tapping between the gas line and the connection point to the stove, if it is required by local codes.

Clearances to combustibles

Clearance distances between the stove and any combustible material must be maintained while installing your appliance.

Clearance to the floor is:

0

Clearance to rear wall is:

4”

(102 mm)

Clearance to side wall is:

8” (203 mm)

Clearance to wall from corner:

2”

(51 mm)

Image 6
Contents EXCEL-FIRE Please Keep this Instructions Manual For Future ReferenceTable of Contents General Information Save These Instructions for Future ReferenceTechnical Specifications Clearance to combustiblesPressure Adjustments BurnerGas Valve SIT 820 Nova mV Installation Safety noticeClearances to combustibles Logs installation Operation Instructions Rock wool fiber installationOptional 6-inch pipe installation Wall thermostatOptional blower Blower electrical connectionGas connection Lighting ProceduresSpill switch Before lightingMaintenance Instructions Shutdown proceduresGlass maintenance Installation Burner removal and installationCleaning Glass doorGas pressure adjustments Replacement Parts Pilot assembly Adjusting air shutter VenturiOptions Limited Warranty Parts Labour

SIT 0.820.634 Nova specifications

The Drolet SIT 0.820.634 Nova is a highly efficient and stylish wood stove designed for modern living environments. This compact yet powerful heating appliance is engineered to provide optimal warmth and comfort while maintaining a focus on sustainability and energy efficiency. The Nova is equipped with a variety of advanced features and technologies that set it apart in the competitive market of wood stoves.

One of the standout characteristics of the Drolet Nova is its impressive heating capacity. With the ability to heat areas of up to 1,800 square feet, this stove is perfect for medium to large living spaces. It boasts a maximum output of 75,000 BTUs, allowing it to effectively battle even the coldest winter days. The unit's design incorporates a large ceramic glass door, which not only allows for an inviting view of the flames but also contributes to efficient heat transfer.

The SIT Nova employs a secondary combustion system that ensures complete combustion of the wood, significantly enhancing efficiency and reducing emissions. This innovative technology minimizes the amount of smoke released into the atmosphere, making it an environmentally friendly choice. Additionally, the wood stove features an air wash system that keeps the glass clean, providing an unobstructed view of the fire while ensuring aesthetic appeal.

Another key feature of the Nova is its adjustable airflow control, which allows users to set the intensity of the flames and the amount of heat produced. This flexibility makes it an ideal option for various heating needs, whether you’re looking to create a cozy ambiance or heat a larger space. The unit is constructed from high-quality steel, ensuring durability and longevity even with continuous use.

The Drolet SIT 0.820.634 Nova is not just about performance; it also emphasizes aesthetic versatility. The stove is designed with a sleek and contemporary finish, making it an attractive addition to any home decor. Its compact size means it can fit into smaller spaces without sacrificing performance.

With an easy-to-use design, the Nova also features a built-in ash pan for convenient cleaning and maintenance. This thoughtful design element allows users to enjoy the benefits of a wood stove without the hassle of complicated upkeep.

In conclusion, the Drolet SIT 0.820.634 Nova wood stove combines efficiency, style, and modern technology to create a heating solution that meets the needs of today's homeowners. Whether you're looking to enhance your living space or reduce your environmental footprint, the Nova stands out as an exceptional choice for reliable and sustainable heating.