Optional Gas Line Installation, Foot rule

Venting Installation

Continued

18"

Min.

Typ.

24" Min.

Figure 16 - Multiple Chase Installation

10 foot rule

All flue gas outlet chimney terminations must extend a minimum of 3 feet in height above the highest point where it passes through the roof and must be at least 2 feet above the highest point of the roof that is within a horizontal distance of 10 feet (see Figure 17).

10'	Level of
10'	Flue Gas
	Flue Gas
	Outlet
	10'
2' Min.	3' Min.
	3' Min.
	2' Min.	3' Min.
		3' Min.

Figure 17 - 10 Foot Rule

finishing the fireplace

Combustible materials, such as wallboard, gypsum board, sheet rock, drywall, plywood, etc. may make direct contact with sides and top around the fireplace face. It is important that combustible materials do not overlap the face itself. Brick, glass, tile or other noncombustible materials may overlap the front face provided they do not obstruct essential open- ings like louvered slots or any other opening. When overlapping with a noncombustible facing material, use only noncombustible mortar or adhesive.

Optional Gas Line

Installation

Gas line hook up should be done by your supplier or a qualified service person.

Note: Before you proceed, make sure your gas supply is turned off.

Use only a 1/2" black iron pipe and appropriate fittings.

1.Remove knockout indentation on refractory or firebrick wall located above the refractory hearth floor. The knockout indentation must be firmly tapped with any solid object such as a 1/2" dowel until it is released. Remove fragmented portions of refractory (see Figure 18).

2.Remove gas line cover plate located on either side of fireplace and pull out insulation from gas line conduit sleeve. Save insulation for reuse. Replace screws.

3.Run a 1/2" black iron gas line into the fireplace through the rear at gas line conduit sleeve (if using a raised platform, add height). Provide sufficient gas line into fireplace chamber for fitting connection (see Figure 19, page 11). Note: Secure incoming gas line to wood framing to provide rigidity for threaded end.

4.Repack insulation around gas line and into sleeve opening. Seal any gaps between gas line and refractory knockout hole with refractory ce- ment or commercial furnace cement, Install the gas appliance or cap off gas line if desired.

Outside of		Side
Fireplace		Firebrick
		Finished
Gas Line		Side
Gas Line	Remove
Conduit	Remove
Conduit	Knockout	1/2" Dowel
	Knockout
Insulation
Insulation
Gas
Conduit
Cover		Refractory
		Refractory
		Knockout
		Plug
Figure 18 - Gas Line Knockout

www.desatech.com

116010-01C

(V)G36HR, (V)G36H, (V)G36R, (V)G36 specifications

The Desa (V)G36R, (V)G36HR, (V)G36, and (V)G36H are modern lightweight modular assault rifles designed for versatility and reliability in various tactical situations. These firearms, part of the G36 family, are renowned for their innovative engineering and performance capabilities, making them suitable for military, law enforcement, and civilian use.

One of the main features of the G36 series is its modular design, which allows for easy configuration and customization. Users can adapt the rifle according to specific mission requirements, attaching different optics, grips, and accessories. The interchangeable components ensure that operators can switch between different configurations effortlessly, enhancing user adaptability in the field.

The (V)G36R is particularly notable for its reflex sight mounting on the receiver, allowing for rapid target acquisition. It features a lightweight polymer body, which significantly reduces fatigue during prolonged use. The rifle is chambered in 5.56x45mm NATO, providing a perfect balance of power and controllability. Its adjustable stock enables operators to tailor the length of pull to suit individual preferences.

The (V)G36HR variant focuses on enhanced accuracy and range, equipped with a longer barrel and precision-engineered barrel stabilizers. This version is designed for marksmen who require the ability to engage targets at extended distances with superior accuracy, making it an excellent choice for designated marksman roles.

The standard (V)G36 offers a reliable and rugged platform, featuring a rotating bolt and short-stroke gas piston system. This gas-operated mechanism reduces recoil and improves reliability, even in adverse conditions. The rifle's high-capacity magazines hold 30 rounds, allowing for sustained fire without frequent reloading.

Finally, the (V)G36H variant provides added versatility with integrated rail systems for mounting tactical accessories. This feature enhances situational awareness and allows for the integration of various aiming solutions, including night vision devices and laser aiming modules.

Overall, the Desa G36 series stands out due to its lightweight construction, modular design, and adaptability. These rifles combine cutting-edge technology with user-centric features, making them effective tools for today's combat environments. Whether used in urban warfare or rural settings, the G36 family delivers exceptional performance and reliability, catering to the diverse needs of modern operators.