Desa (V)G36HR, (V)G36R Flashing installation v6f-10dm or v12f-10dm, Chase installations

Page 9

Venting Installation

Continued

Flashing installation (v6f-10dm or v12f-10dm)

Determine the flashing to be used with the roof opening chart. Slide flashing over pipe until base is flat against roof. Replace as many shingles as needed to cover exposed area and flashing base. Secure in position by nailing through shingles (see Figure 13). DO NOT NAIL THROUGH FLASHING CONE.

Storm

Overlap

Collar

Shingles Top

Flashing

and Sides Only

Cone

 

Nail Only

Outer

Perimeter

of Flashing

Underlap

Shingles

at Bottom

Figure 13 - Flashing Installation

Installing Flashing on a Metal Roof

When installing the flashing on a metal roof, it is required that putty tape be used between the flash- ing and the roof. The flashing must be secured to the roof using #8 x 3/4" screws and then sealed with roof coating to prevent leakage through the screw holes. A roof coating must also be applied around the perimeter of the flashing to provide a proper seal.

Storm Collar Installation (SC2-1)

Place storm collar over pipe and slide down until it is snug against the open edge of the flashing (see Figure 14). Apply waterproof caulk around the perimeter of the collar to provide a proper seal.

Chimney

Waterproof

Pipe

Caulk

Storm

Flashing

Collar

Figure 14 - Storm Collar

Terminations/Spark Arrestor

The fireplace system must be terminated with the listed round top or chase terminations. In any case, refer to the installation instructions supplied with the termination.

CAUTION: Do not seal open- ings on the rooftop flashing. Fol- low the installation instructions provided with the termination being used.

 

RTL-10D

Stainless

Level of

Inner Flue

Pipe

Flue Gas

 

Outlet

Secure

 

Termination

 

to Outer

Waterproof

Pipe with 3

Caulking

Screws

Storm

 

 

Collar

 

Flashing

Overlap

 

Shingles (Top

Underlap

and Sides of

Shingles

Flashing Base)

 

Figure 15 - Termination

Chase installations

Instructions for chase installations are included with the chase style termination chosen. In a multiple chase installation, be sure to provide adequate distance between terminations to prevent smoke spillage from one termination to another. We suggest that terminations be separated at least 24" center to center and stacked at a vertical height difference of 18" (see Figure 16, page 10).

Note: If a decorative shroud is to be installed, contact the manufacturer for specifications.

116010-01Cwww.desatech.com

Image 9
Contents Save this Book Safety Information Table of ContentsSpecifications Selecting location Fireplace InstallationMinimum clearance to combustibles FramingMantels Hearth ExtensionAssembly and installation of double wall chimney system Venting InstallationOptional Outside air Kit Model ak4/ak4f Chimney PipeElbow SET only Using Elbow offsets 30E-12DMPenetrating the roof Firestop Spacers 1100EFS-10DMChase installations Flashing installation v6f-10dm or v12f-10dmOptional Gas Line Installation Foot ruleFinishing the fireplace Installing Door Frames Glass Door InstallationInstalling glass doors Operation Maintenance GuidelinesDoor Adjustment Glass DoorsOutside air and damper handle operation Cleaning GlassReplacement Parts Technical ServiceStorm Collar SC1-1 Bi-Fold Glass Door AccessoriesBDG36P 36 Platinum FinishFirestop Spacer 1100EFS-10DM Double Wall Pipe 12-12DMNot a UPC

(V)G36HR, (V)G36H, (V)G36R, (V)G36 specifications

The Desa (V)G36R, (V)G36HR, (V)G36, and (V)G36H are modern lightweight modular assault rifles designed for versatility and reliability in various tactical situations. These firearms, part of the G36 family, are renowned for their innovative engineering and performance capabilities, making them suitable for military, law enforcement, and civilian use.

One of the main features of the G36 series is its modular design, which allows for easy configuration and customization. Users can adapt the rifle according to specific mission requirements, attaching different optics, grips, and accessories. The interchangeable components ensure that operators can switch between different configurations effortlessly, enhancing user adaptability in the field.

The (V)G36R is particularly notable for its reflex sight mounting on the receiver, allowing for rapid target acquisition. It features a lightweight polymer body, which significantly reduces fatigue during prolonged use. The rifle is chambered in 5.56x45mm NATO, providing a perfect balance of power and controllability. Its adjustable stock enables operators to tailor the length of pull to suit individual preferences.

The (V)G36HR variant focuses on enhanced accuracy and range, equipped with a longer barrel and precision-engineered barrel stabilizers. This version is designed for marksmen who require the ability to engage targets at extended distances with superior accuracy, making it an excellent choice for designated marksman roles.

The standard (V)G36 offers a reliable and rugged platform, featuring a rotating bolt and short-stroke gas piston system. This gas-operated mechanism reduces recoil and improves reliability, even in adverse conditions. The rifle's high-capacity magazines hold 30 rounds, allowing for sustained fire without frequent reloading.

Finally, the (V)G36H variant provides added versatility with integrated rail systems for mounting tactical accessories. This feature enhances situational awareness and allows for the integration of various aiming solutions, including night vision devices and laser aiming modules.

Overall, the Desa G36 series stands out due to its lightweight construction, modular design, and adaptability. These rifles combine cutting-edge technology with user-centric features, making them effective tools for today's combat environments. Whether used in urban warfare or rural settings, the G36 family delivers exceptional performance and reliability, catering to the diverse needs of modern operators.