Desa GL36PNEP, GL36PNP Mantels, Pilot Assembly Adjustment, Burner Flame Adjustment

Page 11

FIREPLACE

INSTALLATION

Continued

Noncombustible

Facing Material

Do Not

Block

Effective

Opening

"L" Shaped

Metal Support

Noncombustible

Facing Material

Figure 17 - Fireplace Facing Material

MANTELS

Mantels, combustible or non-combustible, may be constructed as long as proper clearances are observed (see Figure 5, page 6 and Clearances, page 6).

PILOT ASSEMBLY ADJUSTMENT

The pilot assembly is factory preset for the proper flame height. Alteration to factory settings may have occurred during shipping. If this is the case, some minor readjustments may be necessary and should be done by a qualified technician.

The pilot assembly is located behind the burner next to the rear refractory piece at the right-hand side. The thermopile (in millivolt models) or the sensor (in electronic models) should be engulfed with the pilot flame approximately 3/8" to 1/2" in order for the regulator to receive proper signal (see Figures 18 and 19).

Pilot Burner

Ignitor

 

3/8" to 1/2"

1/8" (3 mm)

(10 mm - 13 mm)

Pilot Burner

Ignitor

Flame

 

 

1/8" to 1/4"

 

Sensor

 

 

3/8" to 1/2"

Pan

 

 

Burner

 

 

Figure 19 - Correct Pilot Flame Pattern

- Electronic Assembly

BURNER FLAME ADJUSTMENT

The air shutter, located at the base of the main burner tube, has been factory preset to the proper air to bas ratio which results in a long, blue, cleaner burning flame (see Figure 20).

If readjustment is necessary, loosen the air shut- ter screw and rotate air shutter until proper flame setting is achieved, retighten air shutter screw. See Figure 20 for air shutter location.

Closing the air shutter reduces the air-to-gas mix, resulting in a longer, yellow flame which produces excessive carbon monoxide (CO) and could also cause sooting.

Burner Pan

Air Shutter

Screw

Orifice

Gas Valve

Figure 20 - Air Shutter Adjustment

Thermopile

Figure 18 - Correct Pilot Flame Pattern

- Millivolt Assembly

55175-F

www.desatech.com

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Marblehead For Your SafetyTable of Contents High traffic areas Windy or drafty areas Safety InformationDimensions Before YOU Begin IntroductionSelecting Location Mantel Clearances Fireplace InstallationClearances Framing Vent Pipe InstallationMillivolt Models GL36PN/PNP Optional Outside AIR KIT Model AK4Electronic Models GL36PNE/PNEPGAS Line HOOK-UP GAS Supply TestingFireplace Facing LOG SET PlacementMantels Pilot Assembly AdjustmentBurner Flame Adjustment Optional Glass Door Installing Glass DoorLighting Instructions Millivolt Models For Your Safety Read Before LightingOperating Fireplace To Turn OFF GAS To Appliance Electronic Models For Your Safety Read Before LightingSpecifications Cleaning MaintenanceTechnical Service Millivolt Wiring Diagram Wiring DiagramsMillivolt System TroubleshootingObserved Problem Possible Cause Remedy See Pilot will not stay lit, above Electronic Ignition SystemReplacement Parts and Accessories Remedy and Exclusions Limited 2-YEAR Warranty

GL36PNEP, GL36PNP, GL36PN, GL36PNE specifications

Desa GL36PN, GL36PNP, GL36PNEP, and GL36PNE are advanced gas fireplaces designed to provide warmth, ambiance, and aesthetic appeal to any living space. These models are known for their cutting-edge features and efficient technology, making them ideal for modern homes looking for both comfort and style.

One of the main features of the Desa GL series is its versatile design, allowing it to seamlessly integrate into various interior styles. The clean and elegant lines of the fireplaces make them an attractive focal point in any room, whether traditional or contemporary. The models come with different finishing options, including a range of trims and decorative fronts, allowing homeowners to customize their look according to personal preference and home decor.

Another significant characteristic of these models is their innovative heating technology. The Desa GL series utilizes advanced venting options that enhance heat distribution throughout the space while ensuring optimal safety. With a focus on efficiency, these appliances are designed to heat effectively while consuming minimal gas, helping homeowners save on energy costs. The models are equipped with an electronic ignition system that ensures reliable lighting and consistent performance, even during power outages.

In addition to heating performance, the Desa GL36PN, GL36PNP, GL36PNEP, and GL36PNE prioritize user comfort and convenience. The included remote control allows for easy adjustments to flame height and temperature, enabling homeowners to create their desired atmosphere with just the push of a button. Some models also come with programmable thermostats, further enhancing user experience by allowing automatic temperature regulation throughout the day.

Safety features are paramount in the design of the Desa GL series. Each model is equipped with a safety shut-off system, ensuring peace of mind for users. The glass front is designed to remain cool to the touch, preventing accidental burns, which is especially important for families with children or pets.

Finally, the aesthetic appeal of the Desa GL series is further enhanced by the realistic flame display and high-quality log sets. The lifelike flame appearance creates a captivating ambiance, making the fireplace a centerpiece in any room, perfect for gatherings or cozy nights in.

In conclusion, the Desa GL36PN, GL36PNP, GL36PNEP, and GL36PNE models combine modern aesthetics with advanced features, ensuring both comfort and safety in home heating. With efficient technology and customizable designs, these fireplaces are a perfect addition to any contemporary living space, offering warmth, style, and convenience.
Top Page Image Contents