Desa PCDM-36VB installation instructions Accessing Fireplace, Removing Louver Panels

Page 1

INSTALLATION INSTRUCTIONS

FOR PCDM-36VB CONVERSION KIT

Forvisit..com

CONVERTING FROM NATURAL GAS TO PROPANE/LP GAS

For Use When Converting Model (V)V36N(-B)(C1) Series and CHDV36NR-C Series

This conversion kit must be installed by a qualified service agency.

Readtheseinstructionscompletelybeforeinstallingthisconversionkit.

Before proceeding, make sure the gas control valve is in the OFF position, all electrical power to the appliance is off, and the fireplace is cool to the touch.

CAUTION: The gas supply shall be shut off prior to disconnecting the electrical power before proceed- ing with the conversion.

Parts included with this kit:

Part No.

Description

Quantity

114418-01

Instruction Sheet

1

108085-02

Pilot Orifice LP (30)

1

104506-20

Pan Burner Orifice LP (117, #56)

1

14544

Tube Burner Orifice LP (104, #59)

1

14488

Gas Valve Regulator LP

1

114355-39

Conversion Label, English

1

114356-39

Conversion Label, French

1

56060

Conversion Information Label

1

106739-01

Registration, Gas Conversion

1

Tools Required

 

 

• 7/8" Open End Wrench

• Torx T20 or Slotted Screwdriver

or Adjustable Wrench

•

5/32" Allen Wrench

• 3/4" Open End Wrench

• #2 Short Phillips Screwdriver

or Adjustable Wrench

•

Thread Sealant

• 11/16" Open End Wrench

 

(Resistant to Propane/LP)

or Adjustable Wrench

 

 

ACCESSING FIREPLACE

The gas control valve and burner orifices are located under the firebox floor of the appliance and are accessed by removing the lower louver panel. The pilot orifice is located in the pilot burner and is accessed by opening the glass door and removing the logs.

Removing Louver Panels

Remove the top and bottom louver panels by simultaneously pulling both top end spring latches towards the center of the appliance until they are disengaged from the locating holes (see Figure 1). Repeat for bottom spring latches and pull the louvers outward. To install or replace items removed, simply reverse the procedures above.

Louver Panel

Spring Latch

Figure 1 - Removing Louver Panel

Opening Glass Door

1.Remove screen assembly by pushing the rod either left or right and then down and forward. Set assembly aside.

2.Lift up on latches of door to unlock. There are two on top of firebox and two below firebox that hold glass door in place (see Figure 2).

3.Remove log set from firebox. Refer to Installing Logs, Lava Rock and Glowing Embers in owner’s manual.

Unlock Lock

Latch

Glass

Door

Figure 2 - Opening Glass Door

Save thisfor.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Removing Louver Panels Accessing FireplaceOpening Glass Door Tube Burner Orifice Conversion PAN Burner Orifice ConversionPilot Orifice Conversion Reinstalling BurnersTube Burner Pan BurnerGAS Control Valve Conversion Installing Pressure Regulator AssemblyFinal Preparation Conversion Labeling and PlacementNot a UPC

PCDM-36VB specifications

The Desa PCDM-36VB is an innovative and expertly designed heat pump that stands at the forefront of modern heating and cooling technology. This unit is a game-changer for both residential and commercial applications, offering efficiency, reliability, and versatility. The PCDM-36VB is particularly notable for its ability to operate in a wide range of temperatures, making it suitable for various climatic conditions.

One of the standout features of the Desa PCDM-36VB is its impressive energy efficiency rating. Equipped with advanced inverter technology, it optimizes energy consumption by adjusting its compressor speed based on the heating or cooling demand. This results in lower energy bills and reduced environmental impact, aligning perfectly with today’s emphasis on sustainability.

The unit is designed with a dual function, allowing it to provide both heating in colder months and cooling during the summer. This versatility is supported by its robust heating capacity, making it a reliable choice for year-round comfort. The PCDM-36VB has a heating capacity that can effectively warm spaces even when temperatures plummet outside, ensuring a consistent indoor climate.

Another notable characteristic of this heat pump is its advanced filtration system. The built-in air purification technology not only ensures that the air circulated within a space is clean and fresh but also aids in reducing allergens and airborne particles. This feature is particularly beneficial for those who suffer from allergies or respiratory issues.

The Desa PCDM-36VB is user-friendly, featuring a smart control system that allows users to adjust settings via a mobile app or remote control. This feature enhances convenience, enabling users to set schedules, switch modes, and monitor energy usage from anywhere, ensuring optimal comfort at all times.

Moreover, the unit operates quietly, making it an ideal choice for residential installations where noise levels can be a concern. The compact design also allows for easy installation in various locations, while its durable construction ensures longevity and low maintenance costs.

In summary, the Desa PCDM-36VB is a highly efficient, versatile, and technologically advanced heat pump. With its dual functionality, superior energy efficiency, advanced filtration, and user-friendly features, it represent a cutting-edge solution for comfortable living and working environments.
Top Page Image Contents