Conversion Labeling and Placement

1.Apply the English and French conversion labels over the top of the existing certification labels (see Figure 10). Existing certification labels are located on the lighting instruction plate inside the gas valve compartment area. With permanent ink, print the previous model number on the label in the space provided (see Figure 11).

2.After filling in the data required on the conversion informa- tion label (see Figure 12), affix it to the floor of the appliance where it is easily seen when the lower louver is removed.

French This Side

English This Side

Lighting Instruction Plate

Figure 10 - Applying English and French Conversion Labels over Existing Certification Labels on Lighting Instruction Plate

FINAL PREPARATION

1.Reinstall logs. Refer to Installing Logs, Lava Rock and Glow- ing Embers in owner’s manual.

2.Leak check the gas control and any connections you've made before operating the appliance. Refer to Checking Gas Con- nections in owner’s manual.

3.Close and latch door.

4.Replace screen and reinstall louver panels.

The conversion is now complete.

To operate your fireplace, refer to Operating Fireplace in your appliance owner’s manual.

WARNING: Test all gas piping and connections, internal and external to unit, for leaks after installing or servicing. Correct leaks at once.

WARNING: Never use an open flame to check for a leak. Apply noncorrosive leak detection fluid to all joints. Bubbles forming show a leak. Correct all leaks at once.

WARNING: This conversion kit shall be installed by a qualified service agency in accordance with the

VENTED GAS FIREPLACE

Conversion Kit Model

Type of Gas

Previous Model #

CONVERSION INFORMATION LABEL

This appliance was converted on

–

gas

Day Month Year

with Kit No.

(name and address of organization making this conversion), which accepts the responsibility that this conversion has been properly made.

56060

106080-01

manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdic- tion. If the information in these instruction is not followed exactly, a fire, explosion, or production of carbon monoxide may result causing property dam- age, personal injury, or loss of life. The qualified service agency is responsible for the proper installa- tion of this kit. The installation is not proper and complete until the operation of the converted appli- ance is checked as specified in the manufacturer’s instructions supplied with the kit.

Figure 11 - Print Previous	Figure 12 - Conversion
Model Number on Conversion	Information Label
Labels

For morevisit www..com

114418-01A

PCDM-36VB specifications

The Desa PCDM-36VB is an innovative and expertly designed heat pump that stands at the forefront of modern heating and cooling technology. This unit is a game-changer for both residential and commercial applications, offering efficiency, reliability, and versatility. The PCDM-36VB is particularly notable for its ability to operate in a wide range of temperatures, making it suitable for various climatic conditions.

One of the standout features of the Desa PCDM-36VB is its impressive energy efficiency rating. Equipped with advanced inverter technology, it optimizes energy consumption by adjusting its compressor speed based on the heating or cooling demand. This results in lower energy bills and reduced environmental impact, aligning perfectly with today’s emphasis on sustainability.

The unit is designed with a dual function, allowing it to provide both heating in colder months and cooling during the summer. This versatility is supported by its robust heating capacity, making it a reliable choice for year-round comfort. The PCDM-36VB has a heating capacity that can effectively warm spaces even when temperatures plummet outside, ensuring a consistent indoor climate.

Another notable characteristic of this heat pump is its advanced filtration system. The built-in air purification technology not only ensures that the air circulated within a space is clean and fresh but also aids in reducing allergens and airborne particles. This feature is particularly beneficial for those who suffer from allergies or respiratory issues.

The Desa PCDM-36VB is user-friendly, featuring a smart control system that allows users to adjust settings via a mobile app or remote control. This feature enhances convenience, enabling users to set schedules, switch modes, and monitor energy usage from anywhere, ensuring optimal comfort at all times.

Moreover, the unit operates quietly, making it an ideal choice for residential installations where noise levels can be a concern. The compact design also allows for easy installation in various locations, while its durable construction ensures longevity and low maintenance costs.

In summary, the Desa PCDM-36VB is a highly efficient, versatile, and technologically advanced heat pump. With its dual functionality, superior energy efficiency, advanced filtration, and user-friendly features, it represent a cutting-edge solution for comfortable living and working environments.