Assembling Mantel

W32LS2 Wall Mantel and Base

ASSEMBLY AND INSTALLATION INSTRUCTIONS

	Shown with	Shown with
	Carved Corbels
		Smooth Corbels

Important: Read entire instruction sheet before assembling or installing mantel kit.

The W32LS2 mantel is only approved for use with any DESA Heating Products 32" full size fireplace system, or firebox and Dimplex electric full size fire- place. Do not use mantel with any other product.

This mantel kit contains the following:

•Mantel pieces - unassembled and marked as follows: #1 Base

#2 Right Side with arrow

#3 Right Front Leg with arrow #4 Left Side with arrow

#5 Left Front Leg with arrow #6 Header with arrow

#7 Top

#8 Header Assembly Block (2 Pieces)

#11 Carved Corbels

#12 Smooth Corbels

•For use only with Dimplex Electric Fireplace #8 Dimplex Filler Assembly Block (1 piece) #9 Dimplex Electric Fireplace Filler Panel

#10 Dimplex Filler Panel Assembly Block (2 Pieces)

•Hardware Kit*

14	- Metal Brackets	118937-01
28	- Screws M6 x 12 mm (1/2")	121149-01
26	- Screws M6 x 30 mm (1 1/4")	121335-01
26	- Washers M6	121336-01
1 - Allen Wrench		121337-01

*Extra hardware may be included.

If any wood pieces are missing or damaged, contact the dealer where you purchased this mantel for replacement. If hardware is missing or damaged, contact DESA Heating Products at 1-866-672-6040 for referral information. You can also visit DESA Heating Products’ technical service web site at www.desatech.com.

Note: Gather all mantel pieces together before assembling mantel.

WARNING: Use only 1/2" screws to attach metal angle brackets. Damage to mantel will result if other screws are used for this purpose.

IMPORTANT: More than one person is required to as- semble and lift mantel.

Estimated assembly time: 45 minutes.

When assembling mantel do not tighten screws completely until told to do so. There should be some play in the pieces to allow for proper alignment and best possible fit. It is very important that more than one person assemble mantel together. Panels must be held in proper alignment to each other while tightening screws to assure fewer gaps and proper surface alignment. When tightening screws, do not over tighten. This may cause threads to strip. For this reason, the supplied Al- len wrench should be used rather than a power screwdriver. Panels have threaded inserts installed at screw locations. Screws should start and turn easily in threaded holes when assembled according to instructions. Do not force screws into holes.

IMPORTANT: There is a serial number label inside of right side panel and on outside package. When calling to request technical assistance or for replacement parts please have that number ready.

Corbel Installation

1.Mantel kit contains two sets of corbels, a carved set and a smooth set. Determine which set you prefer. Discard other set.

2.From back sides of leg fronts, attach corbels using two 1 1/4" screws and washers. See Figure 1, page 2.

www.desatech.com

W32LS2 specifications

Desa W32LS2 is a state-of-the-art heating system designed to provide efficient and reliable warmth for both residential and commercial spaces. This innovative device combines advanced technologies with user-friendly features, making it a preferred choice for many.

One of the standout features of the Desa W32LS2 is its powerful output capacity. With a heating capacity of 32,000 BTU, it can effectively warm medium to large rooms, ensuring a comfortable environment during the colder months. The system is equipped with a built-in thermostat that allows users to set their desired temperature, which helps maintain consistent heat levels throughout the space.

The Desa W32LS2 utilizes advanced infrared heating technology, which is known for its energy efficiency. Unlike traditional heating systems that warm the air, infrared heaters work by warming objects and people in the room directly. This results in faster heat distribution and less energy consumption, ultimately leading to lower utility bills.

Another significant characteristic of the Desa W32LS2 is its aesthetic design. The unit features a sleek and modern look that fits seamlessly into any decor. Its compact size makes it easy to place in various locations without taking up too much space. Additionally, the appliance is available in different finishes, allowing homeowners to choose a style that best matches their interiors.

Safety is a priority with the Desa W32LS2, which includes multiple safety features such as an automatic shut-off function. This safety mechanism ensures that the heater turns off if it overheats or tips over, providing peace of mind for users, especially in homes with children or pets.

The installation process of the Desa W32LS2 is straightforward and does not require professional assistance, making it accessible for the average homeowner. The user-friendly controls allow for easy adjustments to settings, ensuring that everyone can operate the heater without any complications.

In conclusion, the Desa W32LS2 stands out as a highly efficient and safe heating solution. Its powerful heating capacity, energy-saving infrared technology, aesthetic design, and user-friendly features make it an excellent option for anyone looking to enhance their indoor comfort during the winter months. With the right balance of functionality and style, the Desa W32LS2 is a valuable addition to any living or working space.