Jwin i903 instruction manual Listening to Music

Noise-Canceling Headset w/ Bluetooth wireless technology V10M10_IM_EN_12072006

OPERATING INSTRUCTIONS

Listening to Music

In order to listen to music on the i903, it must be paired with a device equipped with Bluetooth wireless technology. To pair with such a device, follow the instructions below:

1.Turn off the Bluetooth wireless communication if it is currently turned on by pressing the Multi-functionbutton for approximately five (5) seconds.

2.With the Bluetooth wireless communication off, hold the Multi-functionbutton for approximately five (5) seconds until the red and blue lights blink alternately around the button. The headset is now ready for pairing.

3.Set your device with Bluetooth wireless technology to its pairing mode (see owner’s manual of the device for these instructions). The model number of this headset is i903. If the device requires a model number entry, please enter “i903.” The password for the headset is “0000.

4.Please enter this password if required by the device. If the headset if correctly

paired, the blue light will blink.

Multi-function button

5.In order to make and receive calls on your mobile phone with Bluetooth wireless technology while listening to music on the i903, be certain to pair the phone BEFORE pairing an audio device or the audio adapter.

Music Playing Functions

1.Volume+/Next : Press and hold this button (>>) for three(3) seconds to skip to the next song.

2.Volume-/Previous: Press and hold this button (<<) for three(3) seconds to return to the previous song

3.Play/Pause control: Press the Play/Pause button to play or pause music.

4.Multi-function/STOPbutton: Press once to stop, press one more time to Play.

Note: Play/Pause Button and Multi-Function Button will act as play button when player is in Stop Mode or Pause mode.

14

2



3

•Active-Noise Reduction remains activated when the headphones are powered on.

- 18 - www.i-Luv.com