Desa ES301, CGEF26B, CGEF32D, VEF26B Installing in Mantel, Existing Fireplace Installation

Page 5

Locating Fireplace

Continued

CAUTION: Do not expose the heater to the elements (such as rain, etc.)

CAUTION: Wear gloves and safety glasses for protec- tion during installation and maintenance.

This electric fireplace can be installed in a mantel, framed into a wall or installed into an existing fireplace. If installing into a mantel, follow mantel’s assembly instructions.

Figure 3 illustrates a variety of ways the heater may be located in a room. The heater may be installed directly on the floor or raised on a hearth.

Corner Mantel

Installation

Framed

Into Wall

Wall Mantel or Existing

Installation Fireplace

Figure 3 - Heater Locations

Installation

WARNING - RISK OF FIRE! The power cord must not be pinched or against a sharp edge. Secure cord to avoid tripping or snaggingtoreducetheriskoffire, electric shock or personal injury.

Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like.Arrange cord away from traffic areas and where it will not be tripped over.

WARNING - RISK OF FIRE! To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft surfaces where openings may become blocked.

WARNING - RISK OF FIRE! Do not blow or place insulation against the firebox.

WARNING: If the information in these instructions is not fol- lowed exactly, a fire or explosion mayresultcausingpropertydam- age, personal injury or death.

Do not store or use gasoline or other flammable vapors in the vi- cinity of this or any other heater.

Installing fireplace

Select a suitable location that is not suscep- tible to moisture and is a safe distance from drapes, furniture and high traffic areas.

Note: Follow all national and local electrical codes. This insert can be installed into either an existing fireplace or as new construction/ renovation.

Installing in Mantel

1.Assemble mantel according to mantel instructions.

2.Locate mantel near a wall (or corner depending on mantel type) close to a power source. You may have to alter base boards to fit mantel flush against wall.

3.Insert fireplace into front of mantel. Be careful not to scratch finish on base. Fire- place will fit flush against front of mantel.

4.Plug fireplace into power source. Push mantel with fireplace into final location.

Existing Fireplace Installation

1.Thoroughly clean out existing fireplace and hearth area.

2.Seal all drafts, vents or ash clean-outs with fiberglass insulation. Seal flue. Once sealed, close damper to stop debris from falling onto unit.

3.If existing fire box is susceptible to mois- ture, cap top of chimney flue to prevent infiltration of water.

120927-54Bwww.desatech.com

Image 5
Contents Patent No ,219,456 B1 Safety Table of ContentsListing Approvals Product DimensionsLocating Fireplace Unpacking and TestingProduct Identification Existing Fireplace Installation InstallationInstalling in Mantel Framing New Construction or RenovationInstalling as Insert Finishing checklistFinishing OperationCleaning Firebox Cleaning and MaintenanceReplacing Heater/Blower Replacing logReplacing Ember Strip Replacing Backlight LED Strip Replacing TransformerReplacing Main Control Board Replacing Flame Generation Replacing Settings Control BoardReplacement Parts Technical ServiceCleaning or Replacing back screen Glass Parts Under WarrantyObserved Problem Possible Cause Remedy TroubleshootingPCB Board and Function Control Assembly Wiring DiagramWall Mantels with Base and Trim For 26 Models AccessoriesWall Mantels with Base and Trim For 32 Models Corner Mantels with Base and Trim For 32 ModelsModels CGEF26B, VEF26B, ES301, CGEF32D and VEF32B PartsParts 120927-54B 120927-54B Keep this Warranty Warranty

CGEF32D, VEF32B, CGEF26B, ES301, VEF26B specifications

Desa CGEF26B, ES301, CGEF32D, VEF26B, and VEF32B are notable models in the heating and energy sector, each offering unique features, technologies, and characteristics tailored to meet diverse consumer needs.

The Desa CGEF26B is a modern energy-efficient heater equipped with advanced ceramic technology. This model is designed to provide sustained warmth in both residential and commercial settings. Its compact design allows for easy portability, making it ideal for personal use as well as larger spaces. The thermostat control feature ensures that the desired temperature is consistently maintained, providing comfort without excessive energy consumption. Furthermore, the heater includes safety features such as overheat protection and a tip-over switch, making it a reliable choice for households with children and pets.

The ES301 model stands out due to its dual-fuel capability, allowing users to switch between electric and propane heating sources. This versatility makes it a favored option in areas prone to power outages. Designed with a sleek aesthetic, the ES301’s modern interface is user-friendly, allowing for easy temperature adjustments and program settings. Its energy-efficient design not only reduces utility bills but also lowers the environmental impact, making it a responsible choice for eco-conscious consumers.

The CGEF32D heater offers enhanced features such as a remote control for convenience, allowing users to adjust settings from a distance. This model is particularly known for its high heating capacity, making it suitable for larger rooms or open-concept spaces. With multiple heat settings and a fan-forced distribution system, it ensures optimal warmth and comfort throughout the area. Its durable construction ensures a long lifespan and reliable performance, even under heavy usage.

The VEF26B model focuses on user safety and efficiency. It features an integrated air filter that helps maintain indoor air quality while heating. This model also includes a programmable timer, allowing users to set operational hours to align with their schedules, thus minimizing energy wastage. Its compact design makes it suitable for homes with limited space or for use in personal offices.

Lastly, the VEF32B is designed for those who require high-performance heating solutions. With an impressive BTU output, this model effectively warms larger environments quickly. It features various heating modes, enabling users to customize their experience based on specific needs. Additionally, its robust safety features ensure peace of mind during operation.

In summary, each of these models—CGEF26B, ES301, CGEF32D, VEF26B, and VEF32B—carries distinct advantages that cater to a wide range of users, combining safety, efficiency, and advanced technology to deliver optimal heating solutions.