Desa 102783-01B installation manual Heater

Page 21

OPERATING

 

FOR YOUR SAFETY READ BEFORE LIGHTING

 

 

 

HEATER

 

 

 

 

 

 

 

WARNING ICONG 001 WARNING

 

 

 

If you do not follow these instructions exactly, a fire or explosion may

 

result causing property damage, personal injury or loss of life.

 

 

 

 

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

WARNING

WARNING ICON

G 001

•If fireplace has glass doors, never operate this heater with glass doors closed. If you operate heater with doors closed, heat buildup inside fireplace will cause glass to burst. Also if fireplace opening has vents at the bottom, you must open the vents before operating heater.

•You must operate this heater with a fireplace screen in place. Make sure fireplace screen is closed before running heater.

NOTICE

During initial operation of new heater, burning logs will give off a paper- burning smell. Open damper or window to vent smell. This will only last a few hours.

Note: Homeowners generally prefer to operate their heater with the chimney damper closed. This will put all the heat into the room. However there may be times you will desire the full flames of the High heat setting but will find the heat output excessive. You can open the chimney damper (if you have one) fully or partially to release some of the heat. WARNING: Damper handle will be hot if heater has been running.

1.STOP! Read the safety information above.

2.Make sure manual shutoff valve is fully open.

3. Press in and turn control knob clockwise

Clockwise

to the OFF position.

Ignitor Button

 

Control Knob

 

 

 

 

HIPILOT

 

 

OFF

 

 

LO

Figure 20 - Control Knob and Ignitor Button Location Continued 21

102783

Page 20 Page 22
Image 21
Page 20 Page 22
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GAS24 Variable Manually-Controlled Models Contents Safety Information With this heater Flame-MaxStandard Split Combo Local Codes UnpackingSafety Device Product Features AIR for Combustion and VentilationOperation Piezo Ignition SystemUnusually Tight Construction Providing Adequate VentilationUnconfined Space Confined SpaceVentilation AIR forDetermining AIR Flow for Heater Location Determining if You Have a Confined or Unconfined SpaceVentilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Vented configuration. Check your state or local codes InstallingCheck GAS Type Flue damper closedMinimum Fireplace Clearance To Combustible Materials LOG Sizing RequirementsMinimum Wall and Ceiling Clearances see Figure Minimum Non Combustible Material Clearances If Using Mantel Installing Attaching Damper Clamp Installing Damper Clamp Accessory for Vented OperationInstallation Items Needed InstallingInstallation Items Needed Connecting to GAS SupplyExternal Regulator With Vent Pointing Down Checking GAS Connections Pressure Testing Gas Supply Piping SystemManual Shutoff Valve Pressure Testing Heater Gas ConnectionsAdd lava rock around base of heater Installing LogsHeater Operating Heater Pilot Flame Pattern Inspecting BurnersTurn off heater and let cool before cleaning Cleaning and Maintenance Trouble ShootingODS/PILOT and Burner LogsSee Cleaning Cleaning and Mainte Trouble ShootingStatement at top TROUBLE- ShootingTechnical Service Service HintsVariable Manually Controlled Parts AccessoriesIllustrated Parts Breakdown Parts Available not Shown Parts ListKeep this Warranty Warranty Information

102783-01B specifications

Desa 102783-01B is a cutting-edge device that combines innovative technology with user-centric design, making it a significant addition to the rapidly evolving tech landscape. This model is particularly notable for its high-performance capabilities and robust features, aiming to meet the diverse needs of modern users.

One of the standout characteristics of the Desa 102783-01B is its powerful processing unit. Equipped with a next-generation multi-core processor, this device ensures smooth operation and responsiveness, allowing users to run demanding applications and multitask effortlessly. The high RAM capacity further enhances performance, enabling quick access to frequently used files and applications, thus improving workflow efficiency.

In addition to its processing capabilities, the Desa 102783-01B incorporates advanced connectivity options. With support for the latest Wi-Fi standards, users can benefit from faster internet speeds and more reliable connections. The device also boasts Bluetooth 5.0 technology, allowing seamless pairing with other devices and accessories, which enhances versatility and convenience in various settings.

The display of the Desa 102783-01B is another highlight. It features a high-resolution screen with vibrant colors and sharp contrast, providing an immersive viewing experience for both work and entertainment. This aspect makes the device particularly appealing to professionals who require precision in visual tasks, such as graphic design and video editing.

Moreover, the Desa 102783-01B places a strong emphasis on security and privacy. It includes advanced biometric authentication options, such as fingerprint recognition, ensuring that user data remains protected. This aspect is crucial in today's digital landscape, where data breaches and unauthorized access are significant concerns.

The design of the Desa 102783-01B also deserves mention. It presents a sleek and modern aesthetic, making it not only functional but visually appealing. The ergonomic design enhances comfort during extended use, catering to users who spend long hours working on their devices.

In summary, the Desa 102783-01B emerges as a robust, feature-rich device that excels in performance, connectivity, and security. Its combination of advanced technology and thoughtful design caters to the needs of both professionals and casual users alike, positioning it as a commendable choice in today’s competitive tech market. As it continues to garner attention, the Desa 102783-01B is set to redefine user experiences across various domains.
Top Page Image Contents