Desa (V)VC36P ON/OFF Series Model HRC100, Thermostat Series Model HRC200, Safety Features

OPERATING FIREPLACE

Optional Hand-Held Remote Operation (Cont.)

25

OPERATING FIREPLACE

Continued

ON/OFF SERIES MODEL HRC100

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 46).

TO LOCK press both buttons on hand-held remote control until light stops flashing. Hand-held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

TO UNLOCK press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Indicator

Light

Control

Button

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace.

Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fire- place, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centigrade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

2.The receiver continuously receives signals from the hand- held remote to control the room temperature. If the hand- held remote is misplaced, obstructed or for any reason cannot transmit to the receiver, the receiver will shut off the fireplace after 8 minutes.

Key Pad Lock Feature

This feature allows the user to lock/unlock the keypad on the hand- held remote in the MANU or AUTO mode to prevent inadvertent operation (i.e. children operating the hand-held remote control, etc.). The keypad is locked in either on or off. Press the POWER and LOCK buttons together to turn the unit on or off.

Figure 46 - On/Off Hand-Held Remote Control Unit HRC100

THERMOSTAT SERIES MODEL HRC200

The hand-held remote can be operated using either the manual mode (MANU) or thermostatic mode (AUTO) (see Figure 47). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1.	Press the POWER and LOCK buttons together to turn on
	the hand-held remote control.
2.	Press the MANU button to turn on the fireplace.
3.	Press the POWER and LOCK buttons together to turn off

Indicator Light

Locks System to Prevent Accidental Ignition

Turns Burners On or Off

Digital Display Shows

Temperature and Settings

	AUTO		Turns Hand-Held
ROOM		SET	Remote On or Off
TEMP		TEMP	and Allows You to
LOCK		POWER	Choose the Manual
	TEMP		Setting
			Selects AUTO
MANU	ºC/ºF	AUTO	Mode

the fireplace.

Auto (Thermostatic) Mode

1.Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2.Press AUTO button to select this mode.

3.Set the desired room temperature by pressing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons together to turn off

the fireplace

Increases or	°C/°F Mode
	Button
Decreases Room
Temperature in
AUTO Mode

Figure 47 - Thermostat Hand-Held Remote Control Unit HRC200

116200-01C www.desatech.com