Desa CEF26BN warranty Unpacking Testing Fireplace, Locating Fireplace, Framing

Page 4

UNPACKING AND

TESTING FIREPLACE

Carefully remove the unit from the box. Prior to permanently installing the unit, test to make sure the unit operates properly. To do this, plug the unit's power supply cord into a conveniently located 120-volt grounded outlet.

CAUTION; The unit's power supply cord must be connected to a properly grounded and pro- tected120-voltoutlet.Alwaysuse ground fault protection where required by the electrical code.

WARNING: Do not operate the unit if it is damaged or has malfunctioned.Ifyoususpectthe unit is damaged, return the unit to an authorized service facility for examination, electrical or me- chanical adjustment or repair.

WARNING: To prevent contact with sagging or loose insulation, the heater must not be installed against vapor barrier or exposed insulation. Localized overheating could occur and a fire could result.

CAUTION: Do not expose the heater to the elements (such as rain, etc.)

CAUTION: Wear gloves and safety glasses for protection during installation and main- tenance.

Figure 2 illustrates a variety of ways the heater may be located in a room. The heater may be installed directly on the floor, carpet or raised on a hearth.

LOCATING FIREPLACE

WARNING: Due to high tem- peratures, this heater should be located out of traffic. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (.9m) from the front of the heater.

WARNING: Never locate this heaterwhereitmayfallintoabath- tub or other water container.

NOTICE:Minimumandmaximum clearancesmustbemaintainedat alltimes.Illustrationsthroughout these instructions reflect typical installations and are for design purposes only. Actual installa- tions may vary slightly due to individual preferences.

Figure 2 - Heater Locations

FRAMING

Figure 3, page 5 shows a typical framing of this heater using combustible materials. All required clearances to combustibles must be adhered to. Header height is measured from the base of the

heater.

Tools and building supplies required for installation:

•

Saw

•

Square

•

Pliers

•

Gloves

•

Hammer

•

Level

•

Phillips screwdriver

•

Framing materials

•

Tape measure

•

Surround

•Wall-finishing materials • Caulking material

•Electric drill/bits

4

www.desatech.com

116863-01B

Page 3 Page 5
Image 4
Page 3 Page 5
Contents For Model CEF26BN with Brushed Nickel Trim Table of Contents Safety InformationProduct Dimension Specifications Listing ApprovalsLocating Fireplace Unpacking Testing FireplaceFraming Installation Framing Heater for New Construction/RenovationInstalling AS a Fireplace Existing Fireplace InstallationThoroughly clean out the existing fireplace and hearth area Installing InsertFinishing Checklist Operating by Remote ControlFinishing Operating InstructionsRemote Control For Electric Fireplace LightCleaning Maintenance Cleaning Firebox CompartmentBulb Replacement Back GlassTechnical Service Flame Generation BulbsLocate flame generation cylindrical drum, figure Remove spring clip. Hold socket and pull out old bulbReplacement Parts TroubleshootingParts Under Warranty Parts not Under WarrantyKeep this Warranty Warranty InformationLimited Warranty Electric FIREPLACE/INSERT

CEF26BN specifications

Desa CEF26BN is a remarkable innovation in the realm of energy-efficient home heating solutions. Designed with the modern consumer in mind, this product combines cutting-edge technology with user-friendly features to elevate indoor comfort while minimizing energy consumption.

One of the primary characteristics of the CEF26BN is its sleek and compact design, which allows it to blend seamlessly into any room decor. Whether you are looking to heat a small living space or a larger area, this model offers versatile installation options, including wall mounting and free-standing configurations. The device is ideally suited for homes, offices, or any setting requiring reliable and efficient heating.

At the heart of the Desa CEF26BN is its advanced heating technology, featuring a state-of-the-art ceramic heating element. This technology provides quick and even heat distribution, ensuring that every corner of the room reaches the desired temperature without the common hot and cold spots associated with traditional heating methods. The ceramic heater boasts durability and longevity, making it a robust choice for long-term use.

Energy efficiency is a standout feature of the CEF26BN. This model incorporates several smart technologies, including programmable thermostats and energy-saving modes that automatically adjust heating levels based on occupancy and time of day. Users can set specific heating schedules, allowing for personalized comfort that aligns with their lifestyles while also helping to reduce utility bills.

In addition to its heating capabilities, the Desa CEF26BN prioritizes safety. It is equipped with multiple safety features, including overheat protection, tip-over shut-off, and cool-touch housing. These features provide peace of mind, making the CEF26BN a secure choice for families with children or pets.

The intuitive control panel is another highlight, featuring user-friendly buttons and an LED display that make it easy to adjust settings. Remote control options enhance convenience, granting users the ability to control their heating preferences from anywhere in the room.

In summary, Desa CEF26BN is an ideal choice for anyone seeking a powerful, efficient, and safe heating solution. With its combination of modern design, cutting-edge heating technology, and an array of safety features, the CEF26BN stands out as a reliable option for creating a comfortable living environment, all while being mindful of energy consumption. Whether you face chilly winter nights or a cool office environment, this heater promises to deliver warmth and comfort where it is needed the most.
Top Page Image Contents