Desa CEF26BN Technical Service, Flame Generation Bulbs, Repeat steps 5 and 6 for second bulb

Page 10

CLEANING AND

MAINTENANCE

Continued

4.Hold socket and push in new bulb (DO NOT exceed wattage).

5.Replace spring clip onto bulb.

6.Repeat steps 3 through 5 for second bulb.

7.Gently push ember bed down until rear edge is resting against rear ledge of unit.

8.Replace glass.

Flame Generation Bulbs

1.Carefully remove glass (see step 1 under Cleaning Firebox Compartment, page 9).

2.From the bottom, gently pull forward and lift up log set ember bed until front edge clears the front of the unit (do not pull up on logs).

3.Loosen left and right screws/brackets that hold glass in place. These are located at the bottom of glass panel (see Figure 7).

4.With gloves and safety glasses in place, lift up on bottom of glass by placing fingers in notches (see Figure 7) and pull forward. Place glass on smooth, soft surface to avoid breakage.

5.Locate flame generation cylindrical drum, figure 8.

6.Squeeze half of drum cylinder until it's top edge clears the top drum track. Remove bot- tom edge of cylinder drum from bottom drum track. This will give you access to the light bulbs. Note: Do not exert excessive pressure on drum cylinder as this may cause damage.

7.Remove spring clip. Hold socket and pull out old bulb.

8.Hold socket and push in new bulb (DO NOT exceed wattage). Replace spring clip.

9.Repeat steps 5 and 6 for second bulb.

10.Insert bottom edge of removed cylinder half into bottom drum track. Squeeze drum cylin- der until it's top edge fits into top drum rack.

11.With gloves, carefully replace glass. Slide top of glass into metal slot and slide bottom onto ledge.

12.Place brackets against glass and tighten screws.

13.Gently push ember bed down until rear edge is resting against rear ledge of unit.

14.Replace glass.

Flame Cylinder Drum

Figure 8 - Flame Generation Cylinder

Drum

TECHNICAL SERVICE

You may have further questions about installation, operation or troubleshooting. If so, contact DESA Heating Productsʼ Technical Service Department at 1-866-672-6040. When calling please have your model and serial numbers of your heater ready.

You can also visit DESA Heating Productsʼtechni- cal services web site at www.desatech.com.

 

Glass

Notch for

 

Access

 

to Glass

 

Panel

Glass

 

 

Bracket

Figure 7 - Glass and Bracket Location

10

www.desatech.com

116863-01B

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For Model CEF26BN with Brushed Nickel Trim Table of Contents Safety InformationProduct Dimension Specifications Listing ApprovalsLocating Fireplace Unpacking Testing FireplaceFraming Installation Framing Heater for New Construction/RenovationThoroughly clean out the existing fireplace and hearth area Installing AS a FireplaceExisting Fireplace Installation Installing InsertFinishing Finishing ChecklistOperating by Remote Control Operating InstructionsRemote Control For Electric Fireplace LightBulb Replacement Cleaning MaintenanceCleaning Firebox Compartment Back GlassLocate flame generation cylindrical drum, figure Technical ServiceFlame Generation Bulbs Remove spring clip. Hold socket and pull out old bulbParts Under Warranty Replacement PartsTroubleshooting Parts not Under WarrantyKeep this Warranty Warranty InformationLimited Warranty Electric FIREPLACE/INSERT

CEF26BN specifications

Desa CEF26BN is a remarkable innovation in the realm of energy-efficient home heating solutions. Designed with the modern consumer in mind, this product combines cutting-edge technology with user-friendly features to elevate indoor comfort while minimizing energy consumption.

One of the primary characteristics of the CEF26BN is its sleek and compact design, which allows it to blend seamlessly into any room decor. Whether you are looking to heat a small living space or a larger area, this model offers versatile installation options, including wall mounting and free-standing configurations. The device is ideally suited for homes, offices, or any setting requiring reliable and efficient heating.

At the heart of the Desa CEF26BN is its advanced heating technology, featuring a state-of-the-art ceramic heating element. This technology provides quick and even heat distribution, ensuring that every corner of the room reaches the desired temperature without the common hot and cold spots associated with traditional heating methods. The ceramic heater boasts durability and longevity, making it a robust choice for long-term use.

Energy efficiency is a standout feature of the CEF26BN. This model incorporates several smart technologies, including programmable thermostats and energy-saving modes that automatically adjust heating levels based on occupancy and time of day. Users can set specific heating schedules, allowing for personalized comfort that aligns with their lifestyles while also helping to reduce utility bills.

In addition to its heating capabilities, the Desa CEF26BN prioritizes safety. It is equipped with multiple safety features, including overheat protection, tip-over shut-off, and cool-touch housing. These features provide peace of mind, making the CEF26BN a secure choice for families with children or pets.

The intuitive control panel is another highlight, featuring user-friendly buttons and an LED display that make it easy to adjust settings. Remote control options enhance convenience, granting users the ability to control their heating preferences from anywhere in the room.

In summary, Desa CEF26BN is an ideal choice for anyone seeking a powerful, efficient, and safe heating solution. With its combination of modern design, cutting-edge heating technology, and an array of safety features, the CEF26BN stands out as a reliable option for creating a comfortable living environment, all while being mindful of energy consumption. Whether you face chilly winter nights or a cool office environment, this heater promises to deliver warmth and comfort where it is needed the most.
Top Page Image Contents