Electric Fireplace 17 Installation Instructions

Servicing Flame Pennants

If the flame pennants should become tangled or detached they may be reattaching or replacing as follows:

1.Locate the affected flame pennant and slip the hem at the base of the flame pennant over the proper hanger bracket position. See Figure 38 for proper location.

2.Pull the flame cord up to the proper hook location, use a slip knot to adjust the cord length and attach the cord to the hook. See Figure 38 for proper cord length.

3.Tie another knot over the slip knot and trim away access cord.

Note: The flame pennant should not be twisted or tangled and should hang slightly loose to allow free movement. If the cord is too short or the pennant is torn you must obtain a replacement flame assembly, See Replacement Parts, page 19.

4.After connecting and adjusting the flame cords, soak each knot with a drop of white wood glue or clear nail polish to prevent them from unraveling.

Replacing Lamp Fixtures

Lamp fixtures may be replaced as follows:

1.Turn off all power to the appliance at the circuit breaker or fuse.

2.Locate any of 3 defective lamp fixtures and trace the wiring to the crimp connections. See Figure 39.

3.Remove the 2 crimp connectors in the harness and disconnect the white and black wires on the defective fixture. See Wiring Diagram, Figure 28, page 12 for proper locations.

4.Remove the 2 Phillips screws at the base of the defective fixture (see Figure 39).

5.Remove the old fixture and remount the new fixture with the 2 Phillips screws removed prior.

6.Twist the bare ends of the white and black wires to the corresponding wires in the main harness and secure them with the 2 crimp connectors provided.

Note: There should be no exposed bare wire at any connection. Wiring should be secured with wire ties, as short as possible and kept away from the fan blades. If additional parts are required, see Replacement Parts, page 19.

6.Replace each light bulb with the proper color, see Replacing Light Bulbs, page 13.

7.Restore power and check the lamp circuit operation, before reassembling the imaging unit.

8.Reassemble the imager. See Accessing Imaging Unit, page 15.

ELECTRIC FIREPLACE 17 INSTALLATION INSTRUCTIONS

Models: (V)E32L, (V)E32LB, (V)E32LH, (V)E32LBH (V)E36L, (V)E36LB, (V)E36LH and (V)E36LBH

FLAME

CORD

1 1/2"

8" 3 1/2" 7"

FLAME

PENNANT

FLAME

SPACER

Figure 38 - Locating the Flame Pennants

SCREWS &	HANGER
WASHERS	SCREWS

REFLECTIVE

RIBBON

LAMP

FIXTURE

CRIMP CONNECTORS

(2) SCREWS

Figure 39 - Replacing Fixtures

Make sure the power is turned off at the supply prior to disassembling this unit.

IMPORTANT: Be sure to inspect the components and wiring for damage before connecting power to the unit. If any components are found damaged, contact an authorized dealer for original DESA replacement part(s) or call DESA at 1-866- 872-6040 for referral.

For more information, visit www.desatech.com

111076-01C

E32, VE36, VE32, E36(L)(B)(H) specifications

Desa E32, VE36, VE32, and E36 represent a series of innovative models designed to meet the diverse needs of contemporary consumers. These products combine cutting-edge technology with practical features, creating a user-friendly experience that appeals to both residential and commercial applications.

The Desa E32 stands out for its energy efficiency and robust design, making it an ideal choice for those seeking sustainable solutions. Its exterior is built from high-quality materials, ensuring durability and resistance to wear over time. This model boasts advanced insulation technology, minimizing heat loss and enhancing performance. The E32 is equipped with a smart thermostat that allows users to program temperature settings according to their preferences, ensuring optimal comfort throughout the day.

The VE36, on the other hand, is engineered for versatility. Its sleek design and compact size make it suitable for various environments, including homes, offices, and even recreational spaces. This model features an intuitive digital interface that allows for easy operation and monitoring. With multiple heating modes and a quick heat-up time, the VE36 can adapt to any situation, providing immediate warmth when needed.

Next in line is the VE32, which emphasizes both efficiency and safety. It features an advanced safety shut-off mechanism, ensuring peace of mind for users. This model utilizes innovative heating technology to deliver consistent warmth while consuming minimal energy. The VE32 also includes a self-cleaning function, making maintenance hassle-free and increasing the lifespan of the unit.

Lastly, the E36(L)(B)(H) model offers modular designs that can be customized to suit specific needs. This multi-faceted unit can adjust its output based on the space it is heating, optimizing performance while reducing energy consumption. The inclusion of smart connectivity features allows users to control the device remotely via smartphone applications, enhancing convenience and adaptability.

In summary, Desa E32, VE36, VE32, and E36(L)(B)(H) models showcase a commitment to quality, efficiency, and user comfort. With their technological advancements, robust safety features, and stylish designs, these models are well-equipped to elevate any space while addressing modern heating challenges. Their ability to adapt to various settings makes them a valuable addition to any home or business environment.