Desa DVF32TMHST Should be Done by a Qualified Technician, Accessing the Fireplace

Page 18

CONVERSION KIT – NATURAL GAS TO PROPANE

SHOULD BE DONE BY A QUALIFIED TECHNICIAN

Read these instructions completely before installing this conversion kit. Before proceeding, make sure the gas control valve is on the "OFF" position, all electrical power to the appliance is OFF, and the fireplace is cool to the touch. Conversion Kit model PC- DVF32TMHSTPN is required for this conversion. Please check the contents before beginning the conversion.

Parts included with this kit:

Part No.

Description

Quantity

110873-01

Instruction Sheet

1

108085-02

Pilot Orifice, LP (30)

1

23104

Main Burner Orifice, LP (#51)

1

14488

Gas Valve Regulator, LP

1

Tools Required:

 

 

• Torx T20 Slotted Screw driver

•

5/32” Allen Wrench

• 11/16" Open End / Adjustable Wrench

• 5/16" Socket or Nut Driver

• 7/8" Open End / Adjustable Wrench

•

#2 Phillips Screwdriver

• Thread Sealant

• High Temperature Silicone Sealant

(Resistant to Propane/LP Gas)

 

(GE RTV 106/Locktite RTV81585)

ACCESSING THE FIREPLACE

You may access the burner system from either side of the unit.

1.Remove the upper and lower louver panels by pulling the four spring latches towards the center while simultaneously pulling the louver assembly away from the unit. The latches are located at each end just below the uppermost and just above the lowermost louvers. See figure 33.

2.Remove the screen rod, if installed, by sliding the screen rod to the left or the right until one of the rod ends is free and completely remove the screen assembly from the fireplace.

3.Open the glass door by releasing the two pairs of latches located on the top and bottom of the firebox (see figure 33). You may need a screwdriver to extend the spring-loaded clasp over the catch on the door flanges. Use caution when opening these latches.

Figure 33

Accessing the Fireplace

- 17 -

For more information, visit www.desatech.com

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Save this Book Industrial DriveREV E Contents Selecting Location For Your SafetyCheck Local Codes Before Installing this Fireplace Minimum Clearances to CombustiblesVent Termination Clearances ClearancesMantel Clearances Vent ClearancesVent Pipe and Termination Clearances Vent Installation Instructions Vent InstallationOffset Elbow Electrical HOOK-UP and Remote Receiver Diagram Wire WAYFraming GAS Supply Testing GAS Line HOOK-UPGAS Control Valve Sediment Trap Pilot AdjustmentPilot Assembly GAS Ratings Type of GAS Natural PropaneLOG SET Installation LOG a PlacementGlass Door Cleaning and Replacement Cleaning Glass DoorReplacing Glass Doors Venturi / Orifice Connection Burner Flame AdjustmentBurner Flame Burner RemovalOperating Guidelines and Maintenance Instructions Decorative FacingPage Accesory and Replacement Parts Wiring Diagram Observed Problem Possible Cause Corrective Action Accessing the Fireplace Should be Done by a Qualified TechnicianDisassembling the Hearth and Burner System Main Burner Orifice ConversionPilot Burner Orifice Conversion Reinstalling the Main Burner GAS Control Valve ConversionIdentification Label Final Preparation

DVF32TMHST specifications

The Desa DVF32TMHST is a sophisticated vent-free gas fireplace that stands out for its combination of elegance, efficiency, and advanced technology. Designed to provide warmth and comfort, this unit offers a reliable heating solution for both modern and traditional spaces.

One of the standout features of the DVF32TMHST is its impressive heating capacity, capable of warming areas up to 1,200 square feet. This makes it an ideal choice for living rooms, open-concept spaces, or any area where consistent warmth is desired. The unit utilizes propane or natural gas, making it versatile for various home setups while ensuring operational efficiency.

A notable characteristic of the DVF32TMHST is its vent-free technology. This means it does not require traditional flue or venting systems, allowing for flexible installation and minimizing structural modifications. The vent-free design also contributes to optimal heat retention, ensuring that more warmth stays within the room rather than being lost through a chimney.

The DVF32TMHST is equipped with an advanced burner system that simulates realistic flames, providing a captivating visual that enhances any room's atmosphere. The realism of the flames is paired with a variety of decorative media options, such as ceramic logs and glowing embers, allowing homeowners to customize the appearance to suit their taste.

Furthermore, the unit incorporates safety features such as an oxygen depletion sensor (ODS), which automatically shuts off the fireplace if oxygen levels fall below a safe threshold. This provides peace of mind for users, making it a safe choice for any living area.

Efficiency is paramount in the design of the DVF32TMHST, boasting an impressive 99% efficiency rating which translates to lower heating costs for homeowners. Additionally, the fireplace operates silently, ensuring that the ambiance of any gathering remains uninterrupted while providing warmth.

In summary, the Desa DVF32TMHST vent-free gas fireplace combines stylish design with cutting-edge technology and features, making it a remarkable heating solution for any home. Its ability to provide substantial heat without the need for venting, coupled with advanced safety features and customizable aesthetics, makes it a worthy addition for those seeking comfort and elegance in their living spaces.
Top Page Image Contents