Desa LFP33PR installation manual Installation Clearances, Conventional Fireplace Installation

Page 8

LFP33PR

UNVENTED PROPANE/LP GAS FIREPLACE

INSTALLATION

Continued

INSTALLATION

CLEARANCES

WARNING: Maintain the mini- mum clearances. If you can, pro- vide greater clearances from floor, ceiling, and adjoining wall.

Carefully follow the instructions below. This will ensure safe installation.

Minimum Wall and Ceiling Clearances (see Figure 7)

A.Clearances from the side of the fire- place opening to any combustible wall should not be less than 16 inches for a cabinet mantel or 12 inches for a cor- ner installation.

B.Clearances from the top of the fireplace opening to the ceiling should not be less than 42 inches.

CONVENTIONAL FIREPLACE INSTALLATION

Conventional installation of this fireplace involves installing fireplace along with the corner, face, or cabinet mantel with hearth base accessories against a wall in your home. Follow the instructions below to install the fireplace in this manner.

Note: The instructions below show installa- tion using the cabinet mantel and hearth base accessories (see Accessories on pages 24 and 25). The hearth base accessory shown is optional for this installation. You can install fireplace and cabinet mantel directly on the floor. The corner mantel accessory cannot be installed with hearth bases. You must install corner and face mantel directly on the floor.

1.

Assemble cabinet mantel, hearth base,

 

and trim accessories. Assembly instruc-

 

tions are included with each accessory.

2.

When installing blower, install a prop-

 

erly grounded, 120 volt three-prong

 

electrical outlet at fireplace location if

7.Break off nailing flanges (see Figure 10, page 9) with hammer or pliers.

8.Place cardboard or other protective material on top of hearth base. Care- fully set fireplace on protective mate- rial, with back of fireplace inside man- tel opening.

9.Attach flexible gas line to fireplace gas regulator. See Connecting Fireplace to Gas Supply, page 11.

10.If blower is installed, route blower elec- trical cord through access holes in ei- ther side of fireplace. Note: Bushing may be moved if necessary. Plug elec- trical cord into electrical outlet.

 

 

 

Gas

Hearth

Flexible

Electrical

Line

Access

Base

Outlet

Gas Line

Hole

 

 

 

 

 

Note: Clearances

 

are the same if

42"

using optional

cabinet mantel or

 

built-in installation.

 

16"

MINIMUM

CLEARANCE

Side Wall - 16"

Cabinet and

Face Mantel

Ceiling - 42"

Corner Mantel

Floor - 0"

an outlet is not there. If possible, lo-

cate outlet so cabinet mantel will cover

it when installed (see Figure 8).

3. Install gas piping to fireplace location.

This installation includes an approved

flexible gas line (if allowed by local

codes) after the manual shutoff valve.

The flexible gas line must be the last

item installed on the gas piping. See In-

stalling Gas Piping to Fireplace Loca-

tion, page 10.

4. Place hearth base accessory against

wall at installation location. Cut an ac-

cess hole in hearth top to run flexible

gas line to fireplace (see Figure 8).

Figure 8 - Placing Hearth Base Accessory Against Wall

Cabinet

Mantel

Figure 7 - Minimum Clearance to Wall and Ceiling

Make sure to locate access hole so cabi-

net mantel will cover it when installed.

Note: You can secure base to floor us-

ing wood screws. Countersink screw

heads and putty over.

5. Route flexible gas line through access

hole in hearth base.

6. Center cabinet mantel on hearth base

(see Figure 9). Make sure mantel is

flush against wall.

Figure 9 - Installing Cabinet Mantel

8

104888

Image 8
Contents Unvented VENT-FREE PROPANE/LP GAS Fireplace What to do if YOU Smell GASSafety Information LFP33PR Unvented PROPANE/LP GAS FireplaceProduct IdentificationLocal Codes UnpackingProduct Features AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space AIR for Combustion VentilationDetermining FRESH-AIR Flow for Fireplace Location Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Installation Optional GA3750 Blower AccessoryCheck GAS Type Electrical HookupMinimum Wall and Ceiling Clearances see Figure Installation ClearancesConventional Fireplace Installation BUILT-IN Fireplace Installation Location of Nailing FlangesInstallation Items Needed Installing GAS Piping to Fireplace LocationMantel Clearances for Built-In Installation Connecting Fireplace to GAS Supply Flare Union Manual Shutoff ValveChecking GAS Connections Pressure Testing Gas Supply Piping SystemPressure Testing Fireplace Gas Connections Installing Logs Installing ScreenOptional Wireless HAND- Held Remote Control Accessory RM4 Installing Batteries for RM4Installing Remote Receiver Unit Installing Batteries in ReceiverInstalling Batteries for Ghrc and Ghrct Series Installing Battery in ReceiverInstalling Battery in Hand-Held Remote Control Unit Ghrct SeriesLighting Instructions For Your Safety Read Before LightingOperating Fireplace Manual Lighting Procedure To Turn OFF GAS To ApplianceOptional Remote Operation Optional Blower OperationCleaning and Maintenance Inspecting BurnersTroubleshooting Observed Problem Possible CauseObserved Problem Possible Cause Remedy Gas leak. See Warning statement Wiring Diagram Service HintsSpecifications Technical ServiceReplacement Parts Parts Under WarrantyParts not Under Warranty Parts CentralAccessories Corner MantelGMC11F Series Walnut Finished Hardwood Veneer GMC13F Series Medium Stained Oak VeneerBlower Accessories Manual Shutoff ValveDuplex Outlet KIT GA3650T T/Stat Blower for t/stat fireplaces onlyIllustrated Parts Breakdown Remote Ready Model LFP33PRParts List KEY Part Number Description QTYFireplace LFP33PR Parts List Warranty Information

LFP33PR specifications

Desa LFP33PR is a notable model within the LFP series, renowned for its advanced features and superior technology. Designed primarily for both residential and commercial applications, the LFP33PR combines efficiency with user-friendly functionality.

One of the standout features of the Desa LFP33PR is its robust energy performance. It is equipped with an advanced heating element that maximizes energy output while minimizing consumption. This energy-efficient design not only reduces utility costs but also aligns with contemporary sustainability goals, making it an environmentally friendly choice for users.

In terms of safety, the Desa LFP33PR incorporates multiple safety mechanisms. These include an automatic shut-off feature that activates when overheating is detected. Additionally, it comes with a built-in flame sensor and a robust housing design that prevents any risk of accidental burns. This focus on safety ensures peace of mind for users, whether in a family home, office environment, or industrial setting.

The LFP33PR also boasts a compact and portable design, making it easy to move from room to room or to different areas within a facility. This portability does not compromise its durability; the unit is constructed with high-quality materials designed to withstand regular use.

Furthermore, the technology integrated into the Desa LFP33PR elevates user experience significantly. It features an intuitive control panel that allows for easy temperature adjustments and timer settings. Users can also benefit from remote control functionality, enabling them to regulate the heating system from a distance.

The aesthetic design of the LFP33PR is another appealing characteristic. Its sleek exterior is available in various colors and can blend seamlessly with different interior styles. This attention to aesthetic detail not only enhances functionality but also ensures that the device adds an element of style to any space.

Maintenance of the Desa LFP33PR is straightforward, with features that allow easy access for cleaning and servicing. The design also minimizes dust accumulation, ensuring optimal performance over time.

In summary, the Desa LFP33PR is a state-of-the-art heating solution, characterized by its efficiency, safety, portability, user-friendly technology, and appealing aesthetics. Its thoughtful design and advanced features make it an excellent choice for those seeking both comfort and reliability in their heating appliances.