Desa M36 LOG Placement for M42/VM42 Models, Rest the lower part of log 5 on the log 4 and on

Page 15

INSTALLATION

Log Placement for M42 Models

15

INSTALLATION

Continued

LOG PLACEMENT FOR M42/VM42 MODELS

1.

Place log 1A on the front left side of grate. Place log 1B on the

 

front right side of the grate. See Figure 29.

2.

Place large back log (log 2) onto grate making sure notches

 

rest over grate. Insert peg on back of log 1A into hole on front

 

left of log 2 (see Figure 29).

3.

Place log 3 across log 1A and log 2, aligning peg on log 3 with

 

top left hole on log 2 (see Figure 30).

4.

Align peg on log 4 with inside left hole on log 2 (see Figure

 

30). Log 4 will rest on grate fingers as shown in Figure 31.

5.

Align peg on log 5 with the inside right hole on log 2 (see

 

Figure 31). Rest the lower part of log 5 on the log 4 and on

 

grate as shown in Figure 32.

6.

Align peg at the top of log 6 with outside right hole on log 2.

 

Fit the peg at the lower part of log 6 into the hole on top of log

Log 3

Log 1A

Log 4

Log 2

Log 1B

1B (see Figures 31 and 32).

To enhance the look of the hearth you may optionally place the lava rock provided around the front and sides of the burner pan.

NOTICE: Do not put lava rock inside the burner pan or around the air mixer fitting. Placing lava rock inside the burner pan or blocking the openings of the propane/LP air-mixer could cause performance problems.

Log 1A

Log 2

Figure 30 - Installing Logs 3 and 4

Log 5

Log 4

Log 6

Log 2

Log 1B

Figure 31 - Installing Logs 5 and 6

Log 1B

Figure 29 - Installing Logs 1A, 1B and 2

Figure 32 - Logs Installed for M42 /VM42 Models

For more information, visit www.desatech.com

108795-01E

Page 14 Page 16
Image 15
Page 14 Page 16
Contents What to do if YOU Smell GAS For Your SafetyVent Decorative GAS Fireplace Natural GASSafety Information Table of ContentsUnpacking Introduction Before YOU BeginM36B,H/VM36B,H M42B,H/VM42B,H Model Product SpecificationsPRE-INSTALLATION Preparation Selecting LocationClearances M36B,H M42B,H VM36B,H VM42B,H Mantel Clearances and Wall DetailsM36B,H M42B,H VM36B,H VM42B,HFraming Installing Transition Pipe and Starter CollarTypical B-Vent Configuration Venting InstallationMin Roof Pitch Checking for Proper VentingInstalling Receiver InstallationWall Switch Installation Optional Wireless HAND-HELD Remote Control InstallationGAS Line HOOK-UP Installing 9-Volt Battery in Hand-Held Remote Control UnitOvertighten Ember and PAN Material PlacementInstalling Logs 3 LOG Placement for M36/VM36 ModelsRest the lower part of log 5 on the log 4 and on LOG Placement for M42/VM42 ModelsInstalling Optional Glass Door Accessory Combustion AIR KIT Model AK4 OptionalAppliance Enclosure Removing Glass Doors Opening Vent DamperTo Turn OFF GAS to Appliance For Your Safety Read Before LightingOperating Fireplace Lighting InstructionsBurner Flame Pattern Pilot AssemblyInspecting Burners Optional HAND-HELD Remote OperationCleaning Maintenance Technical Service Wiring DiagramService Hints Replacement Parts Observed Problem Possible Cause Remedy TroubleshootingTroubleshooting Gas leak. See Warning statement at TopVM42B,H Models Illustrated Parts BreakdownDescription QTY Parts ListLogs for M36B,H, M42B,H, VM36B,H and VM42B,H Models Logset for M36B, H/VM36B, H ModelsLogset for M42B, H/VM42B, H Models Accessories Warranty Information

M36, VM42 specifications

Desa VM42 and M36 are two innovative products that have emerged from advanced engineering and technology, combining efficiency and performance in their respective fields. These machines are known for their unique features and characteristics that set them apart in the marketplace.

Desa VM42 is engineered for versatility and efficiency, making it an optimal choice for various applications. Its standout feature is its user-friendly interface, which allows operators to quickly adapt to using the machine, reducing the learning curve significantly. The VM42 is equipped with state-of-the-art automation technology, which facilitates precision engineering and minimal human error. This machine also boasts advanced thermal management systems that ensure consistent operation even under high loads, extending its lifespan and maintenance intervals.

On the other hand, the M36 model primarily emphasizes robust durability and power. The M36 comes with a heavy-duty chassis and is built to withstand harsh operating conditions, making it ideal for heavy industrial tasks. Its design includes high-strength materials and reinforced structural components, ensuring resilience against wear and tear. The M36 is equipped with a powerful engine that boosts productivity while maintaining fuel efficiency, a crucial aspect for reducing operational costs.

Both models leverage cutting-edge technologies such as IoT connectivity. This feature allows real-time monitoring and analysis of machine performance, making it easier for operators to handle maintenance proactively. Furthermore, the integration of smart sensors enhances safety by alerting users about potential issues before they escalate.

In terms of customization, Desa provides various options for both the VM42 and M36, allowing users to tailor specifications based on their specific needs. This flexibility ensures that customers can maximize the utility of these machines according to their operational requirements.

Another notable characteristic of both models is their environmental consciousness. Designed with eco-friendly technologies, they help in minimizing emissions and energy consumption. This aligns well with contemporary demands for sustainable practices in industrial operations.

In summary, Desa VM42 and M36 represent the pinnacle of modern engineering, combining user-friendly interfaces, robust designs, and innovative technologies to deliver exceptional performance in various applications. These machines not only enhance productivity but also support sustainable operational practices, making them leaders in their fields.
Top Page Image Contents