Lighting and Operating Instructions

NVB Series B-Vent Gas Fireplace

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING:If you do not follow these instructions exactly, a ﬁre or explosion

may result causing property damage, personal injury or loss of life.

A. This heater has a pilot which must be lit manu-

ally. When lighting the pilot follow these instructions exactly.

B.BEFORE LIGHTING smell all around the heater area for gas. Be sure to smell next to the ﬂoor because some gas is heavier than air and will settle on the ﬂoor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any ﬁreplace

•Do not touch any electric switch

•Do not use any phone in your building

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualiﬁed service technician. Applying force or any attempted repair may result in a ﬁre or explo- sion.

D.Do not use this ﬁreplace if any part has been under water. Immediately call a qualiﬁed service technician to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Lighting Instructions

1.STOP! Read the safety information above.

2.Turn OFF all electrical power to the ﬁreplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to “OFF” position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn

clockwise to "OFF".

			ILO	T	��	��
			P	T
t		1
t
lo			F	��	��
F				��	��
P
i		2	F
O		2	F
F			O
			O
5		3	FFO
5	4	3
	4
Euro SIT			SIT NOVA		Honeywell

6.Wait ﬁve (5) minutes to clear out any gas. Then smell for gas, including near the ﬂoor. If you smell gas, STOP! Follow "B" in the safety information above. If you do not smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal section).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depress- ing the piezo spark ignitor until a ﬂame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

3/8" - 1/2"

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If after several tries, the pilot will not stay lit, turn the gas control knob to "OFF" and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to “ON” position.

13.For RN/RP appliances turn the On/Off switch to “ON” position or set thermostat to desired setting.

14.Turn on all electrical power to the ﬁreplace.

To Turn Off Gas to Heater

1.Turn the On/Off switch to "OFF" position or set the thermostat to lowest setting.

2.Turn off all electric power to the ﬁreplace if service is to be performed.

3.Open control access panel.

4.Push in gas control knob slightly and turn

clockwise to "OFF". Do not force.

5.Close control access panel.

7412950

NVBC42, NVBR36 specifications

Vermont Castings, a name synonymous with quality and craftsmanship in the world of hearth products, offers a range of premium gas stoves, including the NVBC42 and NVBR36 models. These stoves are designed for homeowners seeking both elegance and efficiency, making them ideal for various living spaces.

The NVBC42, a 42-inch gas stove, is a perfect blend of modern technology and classic design. It features a large viewing area with tempered glass, providing an unobstructed view of the mesmerizing flames. The NVBC42 is built with a robust steel construction that ensures durability and reliability while retaining heat for an extended period. One of its standout features is the patented advanced airflow system, which promotes efficient combustion and even heat distribution. This technology not only enhances the performance of the stove but also contributes to a cleaner burn with reduced emissions, making it environmentally friendly.

In addition to its functional features, the NVBC42 offers customizable aesthetics with various finishing options and decorative door designs. The stove is equipped with remote control capabilities, allowing users to adjust flame height and heat output conveniently. Its easy-to-use controls provide a seamless experience, whether you prefer manual adjustments or the luxury of a remote.

On the other hand, the NVBR36 is a slightly smaller model, measuring 36 inches, and it embodies the same high-quality construction and performance as its larger counterpart. The NVBR36 is ideal for those who desire a compact yet powerful heat source. Equipped with similar advanced airflow technology, it ensures efficient heating and optimal fuel usage. Like the NVBC42, it also features multiple customization options, allowing homeowners to select their desired finish and design.

Both models come with Vermont Castings' renowned warranty and customer service, ensuring peace of mind for users. The safety features, including an automatic shut-off mechanism, further enhance the user experience. Overall, the Vermont Castings NVBC42 and NVBR36 gas stoves stand out for their combination of efficiency, elegance, and advanced technology, making them a worthy addition to any home. Whether you need a centerpiece for your living area or a functional heating solution, these stoves deliver on every front.