Optional Accessories

NVB Series B-Vent Gas Fireplace

Fan Kit

The FK12 fan kit is available for use on the NVBC36 and NBVC42 model appliances only.

Auxiliary fan systems increase the efﬁciency of the cir- culation of the heating air. The FK12 fan assembly is a ﬁxed speed fan system and does not allow for variable speed control.

Installation

Remove the 2 ceramic ﬁber refractory panels by care- fully lifting them out of the ﬁreplace. Next, remove the access panel by pulling it up and out from the side edge of the panel. Use caution — the panel edges may be sharp.

Center the fan assembly over the mounting location and secure it with the Velcro® strips at the back of the ﬁreplace.

Insert the plug into the receptacle (EB1) located against the lower right side wall of the ﬁreplace.

Caution: Be sure that no wires are pinched.

Prior to reinstalling the access panel and the hearth brick, it is advisable to operate the wall switch on and off to assure fan operation. If the fan does not operate and you are assured that 115 VAC power is present at the receptacle, contact your Dealer.

Reinstall the access panel and hearth brick by reversing Step 1.

WARNING: Never contact blower wheels during operation.

Speed Control

The SCVS variable speed control is available to allow speed adjustment of the fan.

Electrical Connection

The EB-1 electrical junction box is available for use with the fan kits. The EB-1 is standard on the electronic igni- tion models.

Glass Doors

Bi-fold and single panel glass doors are available to enhance the viewing of the ﬁreplace.

Appliance Models	Glass Doors
NVBR36/NVBC36	36GSKBB
	36GDKBB
	36GDKBK
	36GDKDP
	36GDKS

Appliance Models	Glass Doors
NVBR42/NVBC42	42GSKBB
	42GDKBB
	42GDKBK
	42GDKDP
	42GDKS

Outside Air Kit

The Model AK-MST Outside Air Kit is designed to bring additional combustion air directly from the outside to the ﬁreplace. Refer to installation instructions provided with the Outside Air Kit.

Thermal Vent Damper

Installing the TVD6/7 Thermal Vent Damper reduces cold air inﬁltration when ﬁreplace is not in use by open- ing and closing automatically.

Attach the thermal vent damper to the combustion dome with 2 screws. Be sure the tab points down. (Fig. 21)

Start the appliance and operate it for approximately 5 minutes. Turn the unit off and check if the vent damper is in the open position (blades down from the horizontal position). If the damper has not opened, check installa- tion.

Tab

Thermal Vent Damper

Screws

FP577

Fig. 21 Attach the thermal vent damper.

Remote Controls

Optional remote control units are available to control different functions of the appliance.

Model	Function/s Controlled
RC1	“ON/OFF”
RC2	“ON/OFF” and Temperature
MRC3	“ON/OFF” and Temperature control
	with a digital and a programmable 24
	hour clock

	Shrouds

Decorative shrouds are available to enhance the ap- pearance of the termination cap.

Square Shroud

SLSBL

7412950

NVBC42, NVBR36 specifications

Vermont Castings, a name synonymous with quality and craftsmanship in the world of hearth products, offers a range of premium gas stoves, including the NVBC42 and NVBR36 models. These stoves are designed for homeowners seeking both elegance and efficiency, making them ideal for various living spaces.

The NVBC42, a 42-inch gas stove, is a perfect blend of modern technology and classic design. It features a large viewing area with tempered glass, providing an unobstructed view of the mesmerizing flames. The NVBC42 is built with a robust steel construction that ensures durability and reliability while retaining heat for an extended period. One of its standout features is the patented advanced airflow system, which promotes efficient combustion and even heat distribution. This technology not only enhances the performance of the stove but also contributes to a cleaner burn with reduced emissions, making it environmentally friendly.

In addition to its functional features, the NVBC42 offers customizable aesthetics with various finishing options and decorative door designs. The stove is equipped with remote control capabilities, allowing users to adjust flame height and heat output conveniently. Its easy-to-use controls provide a seamless experience, whether you prefer manual adjustments or the luxury of a remote.

On the other hand, the NVBR36 is a slightly smaller model, measuring 36 inches, and it embodies the same high-quality construction and performance as its larger counterpart. The NVBR36 is ideal for those who desire a compact yet powerful heat source. Equipped with similar advanced airflow technology, it ensures efficient heating and optimal fuel usage. Like the NVBC42, it also features multiple customization options, allowing homeowners to select their desired finish and design.

Both models come with Vermont Castings' renowned warranty and customer service, ensuring peace of mind for users. The safety features, including an automatic shut-off mechanism, further enhance the user experience. Overall, the Vermont Castings NVBC42 and NVBR36 gas stoves stand out for their combination of efficiency, elegance, and advanced technology, making them a worthy addition to any home. Whether you need a centerpiece for your living area or a functional heating solution, these stoves deliver on every front.