Operating Instructions, Main ON/OFF Switch

Vermont Castings, Majestic Products DEF/DEFD26

Operating Instructions

NOTE: The control compartment is located behind the upper louvre panel. To access controls, flip the upper louvre panel down.

3	2	1	5	4
				10005754

Fig. 3 Control locations behind upper louvre panel.

1. Main ON/OFF Switch

The ON/OFF switch supplies power to all functions of the fireplace. This is an illuminated switch which normally lights up when in the ON or OFF position.

2. Heater Control

The Heater Control acts to turn the heater ON and OFF as well as setting the comfort level in the room. Turning the knob clockwise from the OFF position will place the heater into operation. The further the knob is rotated clockwise, the higher the setpoint temperature. Turning the knob counterclockwise will lower the setpoint temperature. Turning it all the way counterclockwise will turn the heater function OFF.

WARNING: During any service of this appliance, the power to the unit must be turned OFF. It is not acceptable to use the ON/OFF switch to meet this requirement.

3. Flame Speed Control

Turn the flame speed control knob to increase or decrease the flame speed as desired.

4. Re-learn

This model fireplace with integral remote control has a preprogrammed, matched-pair Receiver/Transmitter already set with randomly-selected house codes. It is highly unlikely that the fireplace code will ever need to be re-learned. If the fireplace needs to re-learn Receiver/Transmitter house codes, perform the following steps:

1.Be sure there is power to the fireplace.

2.Be sure there is a good battery in the Transmitter (hand-held remote).

3.Open the battery compartment of the remote.

4.Press and release the small button located in the top left corner. This will randomly select a new house code in the remote Transmitter.

5.Close the remote Transmitter battery compartment.

6.Press either the ON or OFF button on the remote Transmitter, and the Learn button on the fireplace at the same time. The fireplace is now ready to accept commands from the remote Transmitter.

5. ON/OFF

The ON/OFF button on the fireplace (below the Learn button) is to turn the fireplace ON and OFF when the battery in remote Transmitter is weak, or to manually operate the fireplace without the remote Transmitter.

NOTE: The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

10005581

DEF, DEFD26 specifications

The Vermont Casting DEFD26 and DEF are renowned stoves in the world of heating appliances, combining classic craftsmanship with modern technology to provide an exceptional fire experience. Designed for efficiency and performance, these models offer homeowners an elegant option for warming their living spaces while enhancing the overall aesthetic of their homes.

One of the standout features of the DEFD26 and DEF is their robust construction. Made from high-quality cast iron, these stoves not only ensure durability but also retain heat effectively, radiating warmth long after the fire has died down. The cast iron material absorbs and retains heat more effectively than steel, enabling a steady and consistent warmth even in the coldest of conditions.

Both models come equipped with Vermont Castings' signature air wash system, designed to keep the glass doors clean and clear. This ensures an unobstructed view of the beautiful flames, allowing users to enjoy the ambiance of the fire while benefiting from its heat. The air wash system channels air over the glass, preventing soot accumulation and making it easier for homeowners to maintain a pristine look.

Efficiency is another key aspect of the DEFD26 and DEF. These stoves are certified by the Environmental Protection Agency (EPA) for their low emissions and high efficiency, making them an environmentally friendly choice for heating. They are engineered to maximize combustion, ensuring that more of the wood's energy is utilized for heat rather than escaping as smoke.

The adjustable dampers found in both models allow users to easily control the burn rate and heat output, providing versatility to meet varying heating needs. This feature empowers homeowners to optimize their stove's performance based on external conditions or personal preferences.

Aesthetic appeal is also significant in the design of the DEFD26 and DEF. With their classic style and various enamel finishes available, these stoves can complement any home décor, from rustic cabins to modern residences. The intricate detailing on the doors, along with the option of different pedestal styles, adds a touch of elegance to each unit.

Overall, the Vermont Casting DEFD26 and DEF stoves represent a harmonious blend of tradition and innovation. Their advanced features, efficient performance, and timeless designs make them a valuable addition to any home, providing both warmth and style for years to come. Whether for primary heating or as a beautiful focal point, these models deliver on every front, ensuring customer satisfaction and comfort.