Vermont Casting BFC36 manual Safety Information, Table of Contents

Page 2

BFC36 Balance Flue Heat-Circulating Fireplace

Safety Information

Please Read This Manual Before Installing and Using Fireplace

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instruc-

tions may result in a possible fire hazard and will void the warranty.

Description

The BFC36 fireplace is a solid fuel, woodburning fire- place. The BFC36 is a balanced flue (closed combus- tion) heat-circulating fireplace which receives outside

combustion air through the chimney system.

Precautions

CFM Corporation fireplaces and component parts have been highly tested and will operate safely when in- stalled in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your Vermont Castings, Majestic Products dealer.

Only use CFM Corporation components or the warranty will be voided and a fire hazard may be created.

CFM Corporation warranty will be voided by and CFM Corporation disclaims any responsibility for the follow- ing actions:

Installation of any damaged fireplace or chim- ney component;

Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in CFM Corporation Chimney Top installation instructions).

Installation other than as instructed by CFM Corporation; or

Installation and/or use of any component part not manufactured or approved by CFM Corpo- ration in combination or assembly with a CFM Corporation fireplace system, notwithstand- ing any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

This fireplace and chimney system must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the black fireplace surround.

Burn only solid wood fuel or gas logs.

The BFC36 is intended for operation only with the doors closed.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

WARNING: Check with your electronics manufac- turer before installing a television or other electron- ic device above this fireplace.

Proposition 65 Warning: Fuels used in gas, wood-

burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth de- fects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

Gas Logs

If you plan to install a gas log, the gas line should be installed before framing the fireplace. The gas line must be installed by a certified gas line installer.

BFC36

Listed

UL127 / ULC-S610

Standard for Factory Built Fireplaces

Unit: WABD3J0

 

Table of Contents

 

Safety Information

2

Specifications and Framing

3

Parts Identification

5

Chimney Requirements

6

Planning Information

7

Installation

8

Replacement Parts

19

Accessories

20

2

7412647

Image 2
Contents BFC Safety Information Table of ContentsBFC36 Balanced Flue Heat-Circulating Fireplace BFC36 specifications and framingFireplace and chase parts identification Chimney Requirements Offset Installations Planning the Chimney Run Planning InformationMounting the Fireplace Ten Foot RuleInsulating Fireplace Enclosure For Cold Climates InstallationChimney Supports Framing Installing Electrical WireStraight-Up Chimney Installation Chimney Set-upCutting the Hole Offset InstallationCeiling Chimney Hole Possible Obstructions Framing the Ceiling HolePositioning, Safety Strips Securing the Fireplace Safety strip installationProper Firestop Spacer Installation Installing Chimney SystemInstalling the Firestop Spacer Ceiling HoleCanadian Requirements For Insulation Shield Continue Installing Pipe to Complete RunInstall Remainder of Chimney Sections Additional CeilingsFinishing Finish Wall Installing Top Housing or TerminationInstalling Chimney in a Chase From top of grille opening. ** 6 from top of grille opening Hearth Installation Side Wall ProtectionInstall Door Handles Common Materials and FactorsGlass Door Operation Installing Line for Gas LogsFinish Glass Doors Fireplace Top View BFC Balanced Flue Fireplace BFC Balanced Flue Fireplace Accessories Chimney Components Component Description Model NumberLimited Warranty & 30 Year Protection Plan CFM Corporation

BFC36 specifications

The Vermont Castings BFC36 is a wood-burning fireplace that stands out for its impressive craftsmanship, aesthetics, and efficiency. This versatile model seamlessly combines traditional craftsmanship with modern technology, making it a popular choice for homeowners seeking both functionality and style.

One of the most notable features of the BFC36 is its ability to generate substantial heat while maintaining an energy-efficient performance. With a heating capacity of up to 2,200 square feet, it is perfect for large living spaces or open-concept homes. The unit is designed with a high-efficiency combustion system that allows for longer burn times and reduced wood consumption, making it an environmentally responsible choice. This efficiency not only translates into less frequent refueling but also leads to lower heating costs over time.

The BFC36 also boasts a large viewing area, framed by a beautifully crafted cast-iron faceplate. The door features a ceramic glass window that provides an unobstructed view of the flames, enhancing the ambiance of any room. The unit's elegant design is sure to become a focal point in your living space, combining functionality with a classic aesthetic.

A standout technology featured in the BFC36 is its Advanced Secondary Combustion System. This innovative feature ensures that any unburnt gases are reintroduced into the firebox, where they are burned off, resulting in cleaner emissions and more efficient heat output. This technology not only reduces smoke and particulate emissions but also enhances the fireplace's overall performance.

The BFC36 is constructed from durable cast iron, known for its superior heat retention and distribution capabilities. This material not only ensures longevity and resilience but also provides a traditional look that pairs well with various home styles. The fireplace is also equipped with an air wash system that keeps the glass clean, allowing for unobstructed views of the flames and a hassle-free maintenance experience.

In terms of installation, the BFC36 is designed to accommodate both masonry and zero-clearance installations, making it highly versatile for various home designs. Additionally, it offers customizable options, including multiple finish colors and trim styles, which enables homeowners to tailor the appliance to their specific tastes and preferences.

In conclusion, the Vermont Castings BFC36 is an exemplary wood-burning fireplace that emphasizes efficiency, beauty, and modern technology, making it an ideal choice for anyone looking to enhance their home's heating solution while maintaining an inviting atmosphere.