Vermont Casting 2547CE installation instructions Warranty

Page 27

Warranty

Limited 3 Year Warranty

CFM Corporation warrants that this woodburning stove will be free of defects in material and workmanship for a period of three years from the date you receive it, except that the catalyst, thermostat assembly, handles, glass door panels, cement, and gasketing shall be warranted as described below.

CFM Corporation will repair or replace, at its option, any part found to be defective upon inspection by a CFM Corporation Authorized Dealer. The customer must return the defective part or the stove, with shipping prepaid, to the Authorized Deal- er or pay for any Authorized Dealer in-home travel fees or ser- vice charges for in-home repair work. It is the dealer’s option whether the repair work will be done in the customer’s home or in the dealer’s shop. If, upon inspection, the damage is found to be the fault of the manufacturer, repairs will be authorized at no charge to the customer for parts and/or labor.

Any woodburning stove or part thereof that is repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six

(6)months, whichever is longer.

Limited 1 Year Warranty

The following parts of the woodburning stove are warranted to be free of defects in material and workmanship for a period of one year from the date you receive it: The thermostat assem- bly, handles, glass door panels, cement, and gasketing. Any of these items found to be defective will be repaired or replaced at no charge, upon the return of the part with postage prepaid to a CFM Corporation Authorized Dealer.

Any part repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six (6) months, whichever is longer.

Exclusions & Limitations

1.This product must be installed or serviced by a qualified installer, preferably NFI or WETT (Canada) certified, as prescribed by the local jurisdiction. It must be installed and operated at all times in accordance with the Installation and Operating instructions furnished with the product. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

2.This warranty is transferable; however, proof of original retail purchase is required.

3.This warranty does not cover misuse of the this stove. Mis- use includes overfiring which will result if the stove is used in such a manner as to cause one or more of the plates to glow red. Overfiring can be identified later by warped plates and areas where the paint pigment has burned off. Overfiring in enamel fireplaces is identified by bubbling, cracking, chipping and discoloration of the porcelain enamel finish. CFM Corpora- tion offers no warranty on chipping of enamel surfaces. Inspect your woodburning stove prior to accepting it for any damage to the enamel.

4.This warranty does not cover misuse of the stove as de- scribed in the Owner’s Guide, nor does it cover any stove which has been modified unless authorized by a CFM Corporation

representative in writing. This warranty does not cover damage to the stove caused by burning salt saturated wood, chemically treated wood, or any fuel not recommended in the Owner’s Guide.

5.This warranty does not cover a stove repaired by someone other than a CFM Corporation Authorized Dealer.

6.Damage to the unit while in transit is not covered by this warranty but is subject to a claim against the common carrier. Contact CFM Corporation Authorized Dealer from whom you purchased your stove or CFM Corporation if the purchase was direct. (Do not operate the stove as this may negate the ability to process the claim with the carrier.)

7.Claims are not valid where the installation does not conform to local building and fire codes or, in their absence, to the rec- ommendations in our Owner’s Guide.

8.The salt air environment of coastal areas, or a high-humidity environment, can be corrosive to the porcelain enamel finish. These conditions can cause rusting of the cast iron beneath the porcelain enamel finish, which will cause the porcelain enamel finish to flake off. This warranty does not cover damage caused by a salt air or high-humidity environment.

9.CFM Corporation shall have no obligation to enhance or update any unit once manufactured.

IN NO EVENT SHALL CFM CORPORATION BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES. ALL IM- PLIED WARRANTIES, INCLUDING THE IMPLIED WARRAN- TIES OF MERCHANTABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. THIS WARRANTY SUPERCEDES ALL OTHER ORAL OR WRITTEN WARRANTIES.

Some states do not allow the exclusion or limitations of inciden- tial and consequential damages or limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific rights and you may have other rights which vary from state to state.

How to Obtain Service

If a defect is noted within the warranty period, the customer should contact a CFM Corporation Authorized Dealer or CFM Corporation if the purchase was direct with the following infor- mation:

1.Name, address, and telephone number of the purchaser.

2.Date of purchase.

3.Serial number from the label on the back.

4.Nature of the defect or damage.

5.Any relevant information or circumstances, e.g., installation, mode of operation when defect was noted.

A warranty claim will then start in process. CFM Corporation reserves the right to withhold final approval of a warranty claim pending a visual inspection of the defect by authorized repre- sentatives.

2000971

27

Image 27
Contents Encore Welcome Table of ContentsEncore Multi-Fuel, Model 2547CE SpecificationsInstallation Outside AirChimney Height Prefabricated Chimneys Chimney Connector GuidelinesWhat Kind of Chimney to Use Masonry ChimneysFreestanding Installations Double-wall Chimney ConnectorsSingle-wall Chimney Connectors Securing the Single-wall Connector to a Masonry ChimneyAbove the Fireplace Fireplace InstallationsThrough the Fireplace Wall Pass-ThroughsHearths Floor Protection for Fireplace Installations Keep the Stove a Safe DistanceFrom Surrounding Materials Summary of Clearances Assembly Encore Multi-Fuel Controls Single Air Control Regulates Heat Output and Burn TimeDamper Directs Air Flow Within the Stove Surface Thermometer is a Valuable Guide to Operation Two Ways to Add FuelInfrared Reflective Glass Panels For Clear Fire Viewing Burn Only High-Quality FuelStarting and Maintaining a Fire Use the Air Control Settings That Work Best for YouEncore Control Settings Conditioning Your StoveStart fire with newspaper and dry kindling Refuel While the Embers Are Still HotAsh Disposal Draft Management Back-puffing Draft TestingCreosote FuelMaintenance Tighten the Damper Handle as Needed Adjust the Damper as NeededHow to Adjust the Door Latches Check the Operation Primary Air ShutterReplace the Stove Gaskets as Needed Adjust the Door If NecessaryAnnual Maintenance Permanent Encore Multi-Fuel GasketsChimney System Creosote Model 2547CE Encore Multi-Fuel Heater 1308620 2318620 2378620 1328620 2328620 1338620 Encore Multi-Fuel Heater Warranty CFM Corporation

2547CE specifications

The Vermont Casting 2547CE is a premier choice for homeowners seeking a powerful and efficient wood stove that seamlessly combines traditional craftsmanship with modern technology. Renowned for its exceptional heating capabilities and aesthetically pleasing design, this model sets a benchmark in the industry.

At the heart of the 2547CE is its efficient combustion system, which utilizes secondary combustion technology. This innovative feature ensures that the wood is burned completely and cleanly, maximizing heat output while minimizing emissions. Homeowners can enjoy a warm and inviting space without the guilt of contributing excessive smoke to the environment. This is particularly important in today’s eco-conscious society, where sustainable heating options are in high demand.

One of the standout characteristics of the Vermont Casting 2547CE is its impressive heating capacity. It is capable of heating spaces of up to 2,000 square feet, making it ideal for larger homes or open-concept living areas. The stove also boasts a long burn time, allowing for extended periods between reloads, which means less maintenance and more time enjoying the warmth.

The stove’s design is both functional and visually appealing. With its cast iron construction, the 2547CE provides durability and a timeless aesthetic that can complement various interior styles. The intricate detailing and classic finish options, including a variety of colors, allow homeowners to personalize their stove to fit their décor.

In terms of usability, the Vermont Casting 2547CE is equipped with user-friendly features. The front-loading door provides easy access for loading wood and cleaning the stove, while the large glass window allows for a mesmerizing view of the flames. This feature not only enhances the ambiance of any room but also provides a visual indicator of the stove’s performance, helping users to monitor the fire.

Safety is also a priority with the 2547CE, which includes a built-in air wash system that keeps the glass clean for optimal visibility. Additionally, it meets or exceeds EPA requirements, ensuring that it operates efficiently and responsibly.

In summary, the Vermont Casting 2547CE stands out for its combination of efficiency, aesthetics, and durability. Its advanced combustion technology, substantial heating capacity, and elegant design make it a top choice for homeowners looking to enhance their living space with a reliable and beautiful wood stove.