Assembly

Encore Multi-Fuel Heater

Set Up Your Stove

Cast iron stoves are heavy, and it will take two to four people to move your Encore MF into position.

Wash the protective coating of oil from the griddle with soap and water. Dry the griddle thoroughly and apply a light coating of vegetable oil to season the surface and help prevent rust.

Remove all packing materials from inside the stove.

Install the Optional Bottom Heat Shield

1.Remove the four 10-24 x 1/2” hex head bolts from the corners of the ash drop on the stove bottom.

2.Screw the four 32 mm (1¹⁄₄") spacers into the holes from which you removed the bolts, ﬁnger-tight.

3.Align the bottom heat shield against the spacers with the stepped side toward the rear of the stove.

4.Secure the shield with the four hex head bolts previ- ously removed from the stove bottom.

5.Tighten securely.

ST633

Fig. 14 Use four spacers to attach the bottom heat shield.

Spacers	ST634

Fig. 15 Use spacers and screws to position the ashdoor heat shield.

Attach the Primary Air Thermostat Handle

The primary air thermostat handle is the smaller of the two black handles. Secure the handle to the stub on the right side of the stove with an 8-32 x 2” slot head machine screw.

ST635

Fig. 16 Attach thermostat handle.

Attach the Damper Handle

Adjust the Leg Levellers

Lift the stove slightly so there is no weight on the leg while making the adjustment.

Reverse the Flue Collar (If Necessary)

Reverse the ﬂue collar by removing the two screws that attach it to the back of the stove. Be sure the gasket around the ﬂue collar opening is in position when you screw the collar back onto the stove.

Install the Ash Door Heat Shield

1.Remove the two Phillips pan head screws from the ash door.

2.Insert the screws through the ash door heat shield (from the painted side), place the 8 mm (5/16”) spacers over the screws, and carefully thread them back into the original holes. The curved lip should be upward, under the ashlip of the stove.

3.Tighten securely.

Use the 1/4” -20 x 3” screw to attach the damper handle to the damper stub on the left side.

Assemble the Removable Insert Handle

	The white removable
	insert handle opens
	and closes the front
	doors. Remove after
	each use so it won’t
	get hot, and store it in
	the handle holder in-
	stalled behind the right
	front leg. Assemble	ST540
	the handle by pass-	ST540
	the handle by pass-	Fig. 17 Assemble the front
	ing the 86 mm (3³⁄₈")	Fig. 17 Assemble the front
	ing the 86 mm (3³⁄₈")	door handle.
	screw through the	door handle.
	screw through the
	ceramic shaft and into

the bright metal nub. Tighten carefully until snug.

2000971

2547CE specifications

The Vermont Casting 2547CE is a premier choice for homeowners seeking a powerful and efficient wood stove that seamlessly combines traditional craftsmanship with modern technology. Renowned for its exceptional heating capabilities and aesthetically pleasing design, this model sets a benchmark in the industry.

At the heart of the 2547CE is its efficient combustion system, which utilizes secondary combustion technology. This innovative feature ensures that the wood is burned completely and cleanly, maximizing heat output while minimizing emissions. Homeowners can enjoy a warm and inviting space without the guilt of contributing excessive smoke to the environment. This is particularly important in today’s eco-conscious society, where sustainable heating options are in high demand.

One of the standout characteristics of the Vermont Casting 2547CE is its impressive heating capacity. It is capable of heating spaces of up to 2,000 square feet, making it ideal for larger homes or open-concept living areas. The stove also boasts a long burn time, allowing for extended periods between reloads, which means less maintenance and more time enjoying the warmth.

The stove’s design is both functional and visually appealing. With its cast iron construction, the 2547CE provides durability and a timeless aesthetic that can complement various interior styles. The intricate detailing and classic finish options, including a variety of colors, allow homeowners to personalize their stove to fit their décor.

In terms of usability, the Vermont Casting 2547CE is equipped with user-friendly features. The front-loading door provides easy access for loading wood and cleaning the stove, while the large glass window allows for a mesmerizing view of the flames. This feature not only enhances the ambiance of any room but also provides a visual indicator of the stove’s performance, helping users to monitor the fire.

Safety is also a priority with the 2547CE, which includes a built-in air wash system that keeps the glass clean for optimal visibility. Additionally, it meets or exceeds EPA requirements, ensuring that it operates efficiently and responsibly.

In summary, the Vermont Casting 2547CE stands out for its combination of efficiency, aesthetics, and durability. Its advanced combustion technology, substantial heating capacity, and elegant design make it a top choice for homeowners looking to enhance their living space with a reliable and beautiful wood stove.