Safety Information, Ing unattended | CFM Corporation EF33, EF26

Safety Information

1.Read all instructions before using this appliance.

2.This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combus- tible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (914mm) from the front of this appliance.

3.CAUTION: Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operat-

ing unattended.

4.If possible always unplug this appliance when not in use.

5.Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner.

6.Any repairs to this appliance should be carried out by a qualified service person.

7.Under no circumstances should this appliance be modified. Parts having to be removed for servicing must be replaced prior to operating this appliance again.

8.Do not use outdoors.

9.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.

10.Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped over.

11.To disconnect this appliance, turn controls to the off position, then remove plug from outlet.

12.Connect to properly grounded outlets only.

13.This appliance, when installed must be electrically grounded in accordance with local codes, with the current CSA C22.1 Canadian Electrical codes or for USA installations, follow local codes and the National Electric Code, ANSI/NFPA No. 70.

14.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire or damage the appliance.

15.To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

16.This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored. This appli- ance should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or near it.

17.Use this appliance only as described in this manual. Any other use not recom- mended by the manufacturer may cause fire, electric shock or injury to persons.

18.Avoid the use of an extension cord because of the risk of overheating the cord and the risk of fire. Extension cords are for temporary use only. If an extension cord must be used, it must be UL/CSA certified, rated at 15A (1875W), 125V maximum with 14 AWG minimum and constructed of two current carrying con- ductors with ground. A heavy duty extension cord with the shortest length possi- ble for the connection is recommended and must not be longer than 50 ft. (15.2 m). Do not coil or cover the extension cord.

Save These Instructions

10009816

EF26FG, EF22, EF33, EF26, EF36 specifications

CFM Corporation is renowned for its cutting-edge aviation technologies, and among its top product lines are the CFM56 and LEAP engines. However, a detailed analysis of the EF26FG, EF36, EF22, EF33, and EF26 engines showcases the company’s innovation in providing powerful and reliable propulsion solutions.

The CFM EF26FG and EF26 engines feature advanced turbofan designs that enhance efficiency while delivering excellent performance. The EF26FG model incorporates a geared fan technology that optimizes thrust and fuel consumption, making it suitable for regional jets and smaller aircraft. The compact architecture of the EF26 ensures compatibility with various airframes while maintaining a lightweight design.

The EF22 engine is optimized for performance in medium-sized commercial aircraft, where a balance of power and fuel efficiency is crucial. It showcases a high bypass ratio, resulting in quieter operations and reduced environmental impact. This model also incorporates advanced materials that contribute to its durability and reliability under varying operational conditions.

Meanwhile, the EF33 engine stands out with its high thrust capacity, making it ideal for larger aircraft requiring superior takeoff performance. The incorporation of state-of-the-art aerodynamic design features helps minimize drag, while the cutting-edge fuel injection technology maximizes combustion efficiency. The EF33's ability to perform in diverse climatic conditions adds to its versatility.

Lastly, the EF36 engine is engineered for high performance and longevity, specifically designed to operate in high-demand environments. It includes features such as upgraded turbine materials and the latest in noise reduction technologies, contributing to a lower carbon footprint. Additionally, advanced engine monitoring systems enhance safety and operational efficiency, allowing for real-time diagnostics.

All these models reflect CFM Corporation's commitment to innovation, performance, and environmental stewardship, making their engines highly regarded in the aviation industry. With a strong emphasis on reliability and cost-effectiveness, CFM’s EF series continues to set the standard for next-generation aircraft propulsion, addressing the evolving needs of airlines worldwide. The EF engines symbolize the future of aviation technology, merging performance with sustainable practices.