LG Electronics 47WS50MS, 42WS50MS owner manual Picture Mode options, Screen

CUSTOMIZING SETTINGS 43

Setting		Description
SCREEN	Customizes the PC display options in RGB mode.
(In RGB
	Option
Mode Only)
	Resolution	Selects a proper resolution. See “Customizing PC display options”.
	Auto Config.	Adjusts the screen position, clock, and phase automatically.
		The displayed image may be unstable for a few seconds while the configuration is
		in progress.
	Position/Size/	Adjusts the options when the picture is not clear, especially when characters are
	Phase	shaky. Run Auto Config. before adjusting these.
	Reset	Restores all options to the default setting.

ENGLISH

Picture Mode options

Setting	Description
Backlight	Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
	brightness level, the screen becomes darker and the power consumption will be reduced
	without any video signal loss.
Contrast	Increases or decreases the gradient of the video signal. You may use Contrast when the
	bright part of the picture is saturated.
Brightness	Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
	of the picture is saturated.
Sharpness	Adjusts the level of crispness in the edges between the light and dark areas of the picture.
	The lower the level, the softer the image.
Color	Adjusts intensity of all colors.
Tint	Adjusts the balance between red and green levels.
Color Temp.	Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control	Customizes the advanced options. Refer to the Advanced image options. (See p.44).
Picture Reset	Restores the options to the default setting.

NOTE

yyIf the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game the subsequent menus will be automatically set.

yyYou cannot adjust color and tint in the RGB-PC / HDMI-PC mode.

yyWhen using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.

yyIf Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.