LG Electronics 47WS50MS, 42WS50MS Network Status, Tips for Network setting, Ting the network

Page 25

ENTERTAINMENT 25

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is

required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to con- nect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NET- WORK and press OK.

3Press the Navigation buttons to select Net- work Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

 

Close

Return to the previous menu.

ENGLISH

Image 25
Contents Monitor Signage Contents English Licenses Assembling and Preparing AccessoriesST-200T Stand Screws Optional AccessoriesSP-2000 Cable holder Speaker Cable Tie Screws Media Player Screws CardScreen Buttons/ Screen Marks Connection panel Parts and buttonsScreen Marks Description Connecting the Speakers Using the Mounting Cable TieUsing the IR Receiver Connecting the standIR Receiver cable Portrait Layout Using the Kensington security systemConnecting the Media Player Mounting on a wall Volume Up / Down Remote ControlA Button This button selection is not applicable Number and Alphabet buttonsNavigation buttons Scrolls through menus or Selects the Tile ModeOptions USB Menu control buttonsConnecting to a PC Using the MonitorDVI-D connection RGB connectionDisplay Port connection Hdmi connectionIR Receiver connection Selecting an image mode Adjusting the screenCustomizing image options Selecting an sound mode Adjusting the soundCustomizing PC display options Adjusting aspect ratio Using additional optionsCustomizing sound options Just Scan Proportion. Note When enlarging or reducingPicture, the image may become distorted Selecting an input source Using the input listSelect IP Auto Setting or IP Manual Setting Connecting to a wired networkEntertainment InternetNetwork Status Tips for Network settingTing the network Close Return to the previous menuTips for using USB storage devices Connecting USB storage devicesList or Contents List -Movie List Button List -Music List , Music List -ContentsBrowsing files Yellow a method to view in 5 large thumbnailSupported File Formats Viewing moviesRP,TP,ASF,WMV,FLV Energy Menu DescriptionProperly Tips for using playing video filesVideo options Language or Repeat Picture Size, Audio Language, SubtitleViewing photos Exit the Mark ModeUse the following options while viewing photos Using photo optionsOptions Number of selected photos Photo optionsTransition Effect Option Sound Mode, Clear Voice II or Balance Listening to musicButton Description Control playback by using the following buttonsEnergy Saving button ExitViewing the Contents List DivX VOD Registration DivX VOD GuideWhen you return to the previous menu, press Using PIP/PBPSelect Movie List or Photo List from My MediaMovie List Accessing Main Menus Customizing SettingsAvailable picture settings are described in the following Picture settingsPicture Screen Picture Mode optionsAdvanced Control Sound Mode options Audio settingsAudio Available time settings are described in the following Time settingsTime MinutesAvailable option settings are described in the following Option settingsOption PC Position Setting Description Tile ModePC Size NaturalUSB Content Setting Description Key LockRecovery Product/ServiceTile Mode Natural mode Tile ModeTop left Top right PBPPicture By Picture Displays the SubBottom left Bottom right Size Picture ID YyPicture ID will be disabled while using the MY Media menuNetwork Network settingsHD Receiver Making ConnectionsHdmi See p.55 Avcvbs See p.56 Component See p.55 Memory storage See p.26YyUse a High Speed Hdmi Cable Component connectionAvcvbs connection Connecting to a USBUsing a routerSwitch Connecting to the LANUsing the Internet LAN connectionMode Daisy Chain MonitorsComponent Problem Resolution TroubleshootingNo image is displayed After-image appears on the product Key Lock On message appearsAudio function does not work 42WS50MS SpecificationsWidth x Height DimensionsApplicable only for models that support the speakers 47WS50MS English Unit mm Dimensions42WS50MS 47WS50MS HDMI,DVI-D,Display Port PC supported mode RGB PC supported mode DTV ModeResolution Horizontal Vertical FrequencykHz FrequencyHz Resolution Component HDMI,Display Port DTVCode Hexa Function IR CodesRS-232C Configurations Connecting the cableControlling the Multiple Product Communication ParameterData Command reference listVersion Command2 Set ID NGDatax If there is error, it returns NG Error AcknowledgementTransmission / Receiving protocol TransmissionReal data mapping English English Used to select the afterimage preventing function English Data Description DataHex Mode English English English English Hdmidtv A0 Hdmipc Serial