Dimplex DF2603 manual ·To reassemble light bulb area, Glass Cleaning

·To replace the top light bulbs which illuminate the log exterior:

Bulb Requirements: Quantity of 2 clear chandelier or candleabra bulbs with an E-12 (small) screw base. Please refer to the label adjacent to the upper lights for the correct wattage for your model.

	CAUTION
	·Do not exceed 15 watts per bulb
1.	Examine the bulbs to determine if they need
	replacing. (FIGURE 14)
2.	Hold the socket while unscrewing the bulb.
FIGURE￿14	(FIGURE 13)
3.	Hold the socket while screwing in the new bulb.

·To reassemble light bulb area

1.Replace the glass and hold it in place at top. (FIGURE 12)

2.Fasten retaining clip to hold glass in place. (FIGURE 10)

￿Glass Cleaning:

The glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the glass surface may collect dust particles; these can be removed by buffing lightly with a clean dry cloth.

To remove finger prints or other marks, the glass can be cleaned with a damp cloth using a good quality household glass cleaner. The glass should be completely dried with a lint free cloth or paper towel.

CAUTION

·Do not use abrasive cleaners on glass surface or spray liquids directly onto any surface.

Helpful Hints

Wait until it is time to change the light bulbs to clean inside glass surface.

8