Maintenance

WARNING

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.

LIGHT BULB REPLACEMENT

Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.

Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are two bulbs under the log set which generate the flames and embers.

TOOL REQUIREMENTS

Slot screw driver

HELPFUL HINTS

It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.

LOWER LIGHT BULB REQUIREMENTS

Quantity of 3 – 35 Watt Clear Halogen Lamps, 120 Volt, G9 base. DO NOT EXCEED 35 WATTS PER BULB.

LOWER BULB REPLACEMENT

1.Unplug the unit from the outlet.

2.Remove the two mounting screws from the bottom front of the heater assembly. (FIGURE 2)

3.Loosen but do not remove the four heater and light assembly mounting screws located on the bottom sides of the wall mounted electric fireplace. (FIGURE 2)

4.Slide the heater and light assembly forward to release it

	from the bottom of the wall mounted electric fireplace
	(FIGURE 1).
5.	Place heater and light assembly on a flat surface and
	examine the bulbs to determine which bulb(s) required
	replacement
6.	Remove the burnt out bulb(s) by gently pulling straight
	out of socket. If bulbs are difficult to remove from socket
FIGURE 1	move the bulb from side to side while pulling being
FIGURE 1	careful not to damage the light socket.

7.Insert new bulb(s).

8.Install the heater and light assembly onto the four

	mounting screws.
	9. Slide the assembly backwards to lock it into position.
	10. Tighten the four heater and light assembly mounting
	screws.
	11. Install the two front mounting screws.
FIGURE 2	12. Plug in the wall mounted electric fireplace.

EWM-COPPER, EWM-SS-BLK specifications

Dimplex has established itself as a trusted name in the electric heating industry, renowned for its innovative designs and advanced heating technologies. Among its standout offerings are the Dimplex EWM-COPPER and EWM-SS-BLK electric modern wall-mounted heaters, both of which combine stylish aesthetics with efficient heating capabilities to create a perfect blend for contemporary living spaces.

The Dimplex EWM-COPPER is notable for its eye-catching brushed copper finish, which brings a touch of luxury and elegance to any room. This heater is designed with modern homes in mind, featuring a slimline profile that allows for easy installation in tight spaces without sacrificing performance. The EWM-COPPER utilizes advanced heating technology, offering quick heat response times and efficient energy use, making it an ideal choice for larger areas or for enhancing the ambiance of any indoor setting.

On the other hand, the EWM-SS-BLK comes with a sleek stainless steel black finish, providing a minimalist look that complements a variety of décor styles. Its compact design fits seamlessly into both residential and commercial environments while maintaining superior heating efficiency. Both models are equipped with a highly accurate temperature control system, allowing users to set and maintain desired warmth levels easily.

One of the key highlights of both the EWM-COPPER and EWM-SS-BLK is their smart control features. They can be programmed to suit individual schedules and preferences, leading to energy savings and optimized comfort. Additionally, these models feature built-in safety mechanisms, including overheat protection and tip-over switches, ensuring peace of mind during operation.

The Dimplex EWM series is also designed for convenience. They come ready to use with simple installation procedures and are low-maintenance, eliminating the need for traditional fuel sources or extensive upkeep. With their blend of style, technology, and practical benefits, the Dimplex EWM-COPPER and EWM-SS-BLK heaters are ideal choices for consumers looking to elevate their heating solutions while enhancing the aesthetic appeal of their spaces. These innovative units stand out not only for their functionality but also their ability to blend into any modern interior, making them a great addition to contemporary homes.