Before use
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.
This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc.
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.
Indicates hazards likely to cause harm to the unit itself or other material damage.
DVD and finalized DVD±R/RW | |
ACD | Audio CDs |
MP3 | MP3 files |
WMA | WMA files |
JPEG | JPEG files |
DivX | DivX files |
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R/RW, and
Note:
•Depending on the conditions of the recording equipment or the
•Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
•Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal). It may result in malfunctions.
Regional Code
This unit has a regional code printed on the bottom of the unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”.
Note on Regional Codes
•Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player’s regional code or the disc cannot play.
•If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.
POWER SAVE MODE
You can set up the unit into an economic power save mode.
In
-Nothing is displayed in the display window when the unit goes into the power save mode.
To cance power save mode, press 1(POWER).
Introduction
5