Setting the Clock
1.Press CLOCK.
2.Select a 24 hour time system or a 12 hour time system by tapping ./>.
(12HR) | or | (24HR) |
3.Press SET to confirm the selected hour time system.
4.Tap ./> on the front panel to set the correct hours.
5.Press SET.
6.Tap ./> on the front panel to set the correct minutes.
7.Press SET and the correct time is shown on the display window.
8.Press CLOCK at any time to display the time for about 5 seconds.
Note:
If you want to reset the clock, press and hold CLOCK for more than 2 seconds.
Timer Function
With the TIMER function, you can have the radio reception, CD play and USB play turned on and off at the desired time.
1.Press CLOCK to check the current time.
(If you don’t set clock, the timer function doesn’t work.)
2.Press TIMER to enter the timer setting mode. If you want to correct the previous memorized TIMER setting, press and hold the TIMER for more than 2 seconds.
-The previously memorized timer on the time and “
” indicator appears in the display window.
3.Each function (TUNER → DVD/CD → USB) flashes in the display window in turn. Press SET when the desired function is flashing.
4.a. When you select the TUNER function, select the previously memorized preset number by tapping ./ > on the front panel and press SET.
- “ON TIME” indicator appears for about
0.5 seconds in the display window and then disappears.
b.When you select the DVD/CD or USB function,
-“ON TIME” indicator appears for about 0.5 seconds in the display window and then disappears.
5.Set the hour to switch on by tapping ./> on the front panel.
6.Press SET.
7.Set the minute to switch on by tapping ./> on the front panel.
8.Press SET.
-“OFF TIME” indicator appears for about 0.5 seconds in the display window and then disappears.
9.Set the hour to switch off by tapping ./> on the front panel.
10.Press SET.
11.Set the minute to switch off by tapping ./> on the front panel.
12.Press SET.
13.Adjust the volume level by tapping ./> on the front panel.
14.Press SET.
“
” appears in the display window and the timer setting has been completed.
15.Switch the system off.
The selected function is automatically switched on and off at the time set.
Note:
If you insert the DVD,VCD or DivX except audio CD/MP3/WMA on the unit, the timer function will be operated to the TUNER.
To cancel or check the timer
Each time the TIMER is pressed you can select the timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER that “
” appears in the display window.
To cancel the TIMER, press the TIMER that “
” disappears in the display window.
Sleep Timer Function
When the sleep timer is used, the power is automatically turned off after the specified time has elapsed.
1.Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appears in the display window.
2.Each time you press SLEEP the setting changes in the following order.
SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 → 50 → 40 → 30 → 20 → 10 → OFF (No display)
Note:
If you press SLEEP while the sleep time is displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed.
Installation and Setup
11