Connections
TV Connections
Make one of the following connections, depending on the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Caution
–Make sure the DVD/CD receiver is connected directly to the TV. Select the correct AV input on your TV.
–Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.
Video connection
1Receiver to the video in jack on the TV using the video cable supplied (V).Connect the MONITOR OUT jack from the DVD
2the DVD/CD Receiver to the audio left/right in jacks on the TV (A) using the audio cables.Connect the Left and Right AUDIO OUT jacks from
1receiver to the
2the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the audio cables.Connect the Left and Right AUDIO OUT jacks from
Component Video (Color Stream®) connection
1theDVD/CD receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).Connect the COMPONENT VIDEO OUT jacks from
2the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the audio cables.Connect the Left and Right AUDIO OUT jacks from
Progressive Scan (ColorStream® pro) connection
If your television is a
If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled if you try Progressive Scan on the DVD/CD receiver.
1the DVD/CD receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).Connect the COMPONENT VIDEO OUT jacks from
2the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.Connect the Left and Right AUDIO OUT jacks from
ote
–Set the Progressive to “On” on the Setup menu for progressive signal, see page 20.
10