Weber Burner owner manual Parts List

Page 29

Parts List

All items are single quantities unless otherwise specified.

Parts can be ordered directly from Weber-Stephen Products Company by phone or mail.

Note - Do not return parts to Weber-Stephen Products Co. without first contacting the Customer service Center by phone or mail. Returning the part may not be necessary.

1.#8-18 x 5/8 inch screw (3)

2.Nylon lid handle (top)

3.Nylon lid handle (bottom)

4.Thermometer

5.Nylon damper handle

6.Lid assembly

7.22 inch hinged cooking grate

8.Char-Baskets Fuel Holders (2)

9.Charcoal grate

10.Hex drive

11.Damper blades

12.Lid holder support strap

13.Lid holder lower support

14.1/4-20 x 5/8 inch truss head screw

15.1/4 inch aluminum washer (9)

16.1/4-20 hex keps nut (5)

17.Lid holder wire

18.Bushings (2)

19.1/4-20 x 1 3/4 inch bolt (8)

20.1/4 inch nylon washers (16)

21.1/4-20 acorn nut (4)

22.Bowl

23.Ash catcher support bar

24.Thumbscrew

25.Control rod

26.Ash catcher ring assembly

27.Ash catcher handle

28.Ash catcher

29.1/4-20 x 1/2 inch bolt (4)

30.Front panel assembly

31.Wheel frame

32.Bottom connector (2)

33.Axle

34.Wheels (2)

35.Wheel hub caps (2)

36.Bottom rack

Contact:

Weber-Stephen Products Co.

 

Customer Service Center

 

250 South Hicks Road

 

Palatine, IL 60067-6241

 

(800) 446-1071

37.CharBin Storage Container

38.Bowl panel

39.Control panel

40.Burner assembly

41.Orifice clip

42.Hose and regulator assembly

43.CharBin lid handle

44.CharBin lid

45.Hinge rod

46.Tool holders (3)

47.Igniter

48.Igniter lock nut

49.Top frame

50.Tubing plugs (4)

51.Hinge bushings (2)

52.Nylon insert (4)

53.Cooking grate holder

54.Caster frame

55.Tank holder

56.Tank panel

57.Caster inserts (2)

58.Casters (2)

59.Match holder/burner cleaning tool

60.5 lb LP tank

61.Filler adapter

WARNING:

Use only Weber factory authorized parts. The use of any part that is not factory authorized can be dangerous. This will also void your warranty.

29

Image 29
Contents Performer Page Customer Service Center South Hicks Road Palatine, IL 800 WarrantyPatents and Trademarks Contents Storage General InstructionsCheck package contents Assembly InstructionsFollowing items will be found in the bottom carton Following items will be found in the hardware pack Assemble wheelsAssemble the frame Remove protective packagingComplete frame assembly Continue frame assemblyUncover CharBin lid Install bowl assemblyRemove protective plastic covering from CharBin lid. Figure Four bolts are correctly in placeImproper Filling is Dangerous Install igniterFill LP tank Install and connect filled LP tank BARBECUE. Contact your dealer Check for gas leaksRemove protective plastic covering from bowl panel Add bowl panel, tool holders and CharBin Storage ContainerAdd grates, Char-Basket Fuel Holders and lid Install ash catcher, control panel & bottom rackLighting Operating InstructionsInsect Alert Manual LightingIndirect Method Cooking MethodsDirect Method To Clean Kettle Periodic CleaningStorage Refilling the LP tankConnecting the LP tank Safe handling tips for LP Gas Products Co., Customer Service CenterLiquid Propane LP Tanks LP tank requirementsThis is not a Defect Troubleshooting & MaintenanceTroubleshooting Inspecting and Cleaning the Burner MaintenanceBurner Flame Pattern Periodic Quick CleaningIgnition System Page 12-13 14-16 18, 15-16 19-20, 15 29,20 41-42 47-48 49-52 Parts List Final Word Thanks